Gefen DVI-2-HDSDIS User Manual
DVI to HD-SDI
Scaler
USER MANUAL
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The DVI to HD-SDI Scaler is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
© 2005 Gefen Inc., All Rights Reserved
Notice
1
Introduction
2
Operation Notes
3
Panel Descriptions
4
Menu Functions
6
Supported Input/Output Resolutions
7
RMT-8HDS-IR Installation
8
Firmware Update Procedure
9
Specifi cations
10
Warranty
TABLE OF CONTENTS
INTRODUCTION
Gefen's DVI to HD-SDI Scaler is the newest revision of our HDSDI conversion line incorporating Full Single link DVI-D conversion scaled to your choice of SD/HDSDI Single
or Dual link modes. Resolutions of up to 1080p are supported over the HDSDI link for
those that want true “High Defi nition”. Performance has been greatly enhanced due to
Gennum’s VXP Scaler onboard; allowing for new features such as: Color & Gamma
Correction, Noise Reduction, Detail Enhancement, Aspect Ratio Selection, Pattern Generator Mode, & Multiple Language Menu Support. Bottom Line? -- More performance,
less cost.
CONTENTS
The DVI to HD-SDI Scaler consists of:
--- (1) DVI to HD-SDI Scaler
--- (1) 6 foot DVI Cable (m-m)
--- (1) RMT-8HDS-IR Remote Control
--- (1) 5V DC Power Supply
--- (1) User's Manual
1
Loading...