![](/html/9d/9dd2/9dd2dd3332001ab2b23246e536d858daf102457321f0e1c3de5abbfbd28eecaa/bg2.png)
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The DVI to HDSDI PRO is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
![](/html/9d/9dd2/9dd2dd3332001ab2b23246e536d858daf102457321f0e1c3de5abbfbd28eecaa/bg3.png)
TABLE OF CONTENTS
Introduction
Operation Notes
Panel Descriptions
Menu Functions
Supported Input/Output Resolutions
RMT-8HDS-IR Installation
RS-232 Control and Firmware Update Procedure
Specifi cations
Warranty
1
2
3
4
6
7
8
9
10
![](/html/9d/9dd2/9dd2dd3332001ab2b23246e536d858daf102457321f0e1c3de5abbfbd28eecaa/bg4.png)
INTRODUCTION
The Gefen DVI to HDSDI Pro Scaler combines two of our DVI to HDSDI Scaler
Plus units into one rack-mountable unit. It still incorporates full single-link DVI-D
conversion scaled to your choice of SD/HDSDI Single- or Dual-link modes, but now
simplifi es your rack. Resolutions of up to 1080p are supported over the HDSDI link
for those that want true “High Defi nition.” Performance has been greatly enhanced
due to Gennum’s VXP Scaler circuitry onboard, allowing for new features such as
Genlock, Color & Gamma Correction, Noise Reduction, Detail Enhancement, Aspect
Ratio Selection, Pattern Generator Mode, and Multiple Language Menu Support.
Bottom Line? More performance, less cost.
DVI devices are connected to the DVI inputs and SDI devices are connected to the
SDI outputs. When the source, display and the Scaler are powered and connected,
video signals are converted to the proper format. There are two separate menu
systems for each integrated DVI to HDSDI box. Input 1 is labeled as the Master
device in the menu system while Input 2 is labeled as the Slave device. Please refer
to page 2 on how to access each separate menu system
CONTENTS
The DVI to HD-SDI Pro consists of:
(1) DVI to HDSDI PRO
(2) 6 foot DVI Cable (m-m)
(1) RMT-8HDS-IR Remote Control
(1) 5V 6A Universal DC Power Supply
(1) User's Manual
1
HOW IT WORKS