Gefen DVI-141HD User Manual

ASKING FOR ASSISTANCE

Technical Support:

Telephone: [phone]
800-545-6900

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday.

Write To:

Gefen Inc.
c/o Customer Service
20600 Nordhoff Street

Chatsworth, CA 91311 USA

Gefen Inc. reserves the right to make changes in the hard ware, packaging and any

accompanying doc u men ta tion without prior written notice.

DVI Repeater is a trademark of Gefen Inc.

© 2005 Gefen Inc., All Rights Reserved

Notice

TABLE OF CONTENTS

Introduction

1

Features

2

Panel Descriptions

3

Connecting and Operating the DVI Repeater

4

Specifi cations

5

Warranty

6

INTRODUCTION

Congratulations on your purchase of the ex•tend•it DVI Repeater. Your complete sat­isfaction is very important to us. Gefen’s line of KVM (Keyboard Video & Mouse), DVI,
ADC, USB, switches, extenders, converters and hubs is designed to make computer
use more comfortable, more productive and less expensive. KVM switches allow access
to multiple computers from a single keyboard, while the extenders give the user control
over a computer up to 330 feet away from the work area. The ex•tend•it line offers solu­tions for noise, space and security concerns, data center control, information distribu­tion, conference room presentation, and school and corporate training environments.

Our Commitment
Gefen will always offer the fi nest quality product at the best possible price. Included in

that price is a lifetime of free support from a team of outstanding engineers.

Introduction
The ex•tend•it DVI Repeater extends the length of any DVI cable by regenerating the

DVI signal before it outputs to the DVI monitor or projector. The DVI Repeater will clean
out the digital noise (sparkles) in your picture. The ex•tend•it DVI Repeater is connected
with a DVI (male to male) cable from the computer DVI graphic port to the DVI Repeater
input. The DVI Repeater output uses a second DVI (male to male) cable to go from the
output to any DVI display or projector with a DVI connector. The box is placed near the
display to remove any noise that has been generated by a long DVI cable.

1