Thank you for purchasing the Composite Extender by Gefen, Inc.
The Composite Extender allows users to extend Composite video signals beyond the A/V
rack. The Composite Extender Series can be used to extend a Composite signal to cover
the distances up to 1000 feet. Industry standard Category 5e (CAT-5e) cable is used for
the extension.
HOW IT WORKS
The Composite Extender sender resides next to the TV source. With the supplied
Composite cable, the Composite Extender sender is connected to the source. The
Composite Extender receiver is then placed next to the monitor or projector. Industry
standard Category 5e (CAT-5e) cable is used to link the Composite Extender send er and
Composite Extender re ceiv er together.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE COMPOSITE EXTENDER SYSTEM
• Use industry standard Category-5e (CAT-5e) cable to operate the Composite Extender
system. CAT-5e cable is preferred.
• Please connect all the cables between the source and the Composite Extender before
powering up the Composite Extender unit.
• The Composite Extender units are housed in a metal box for better RF shielding.
1
Page 5
FEATURES
Features
• Extends Composite video up to 1000 feet
• Power only required only on transmitter.
• Plug & Play installation.
• One CAT5 Cable for extension.
• No Loss of Quality.
Includes:
(1) Composite Extender sender unit
(1) Composite Extender receiver unit
(1) 5V DC power supply
(1) Composite Cable
(1) User’s Manual
2
Page 6
INSTALLATION INSTRUCTIONS
Connect the Composite output of your TV source to the input on the Composite
1.
Extender Sender Unit.
Connect the Composite input of your display or projector to the Composite output
2.
on the Composite Extender Receiver Unit.
Connect the CAT-5 cable between the Composite Extender sender and receiver’s
3.
CAT-5 input.
Power on both the Composite source and display
4.
Plug the 5 volt power supply into the sender unit. The Composite Extender
5.
receiver will draw power from the sender.
Note: Any of the 3 RCA lines can be used for video and remaining two will be for audio.
Both ends will need to be matched for the signal to be passed through correctly.
FrontBack
Right Audio In Left Audio In
FrontBack
Video In
Sender
Receiver
5V DC
Cat 5
Power Light
Right Audio Out Left Audio Out
Video Out
Brightness
Adjustment
3
Focus
Cat 5
Power Light
Page 7
CAT5 WIRING DIAGRAM
8
1
1
2
RJ-45 Jack
Orange
White/Orange
White/Green
3
4
Blue
5
6
7
Green
White/Blue
White/Brown
8
Brown
1
2
RJ-45 Jack
3
4
5
6
4
7
8
8
1
Page 8
SPECIFICATIONS
Video Amplifi er Bandwidth .................................................................................. 350 MHz
Input Video Signal ......................................................................................... 1.2 Volts p-p
Video In .......................................................................................1 RCA Composite Video
Audio In ..................................................................................................2 RCA L+R Audio
Video Out ...................................................................................1 RCA Composite Video
Audio Out ...............................................................................................2 RCA L+R Audio
Link Connector ........................................................................................................ RJ-45
Power Consumption ............................................................................................... 1 Amp
Power Supply ......................................................................................................... 5V DC
Dimensions .......................................................................... 0.875”H x 1.625”W x 3.25”D
Gefen Inc. warrants the equipment it manufactures to be free from defects in
material and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two
(2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace
the equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose,
all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be
accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that
may be contained in this manual. In no event will Gefen Inc., be liable for direct,
indirect, special, incidental, or consequential damages resulting from any defect
or omission in this manual, even if advised of the possibility of such damages. The
technical information contained herein regarding the Composite Extender features and
specifi cations is subject to change without notice.
7
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.