Page 1
4x1 DVIKVM
Switcher
USER MANUAL
www.gefen.com
Page 2
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 884-6294
(800) 545-6900
Fax (818) 884-3108
Technical Support Hours:
9:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
C/O Customer Service
6265 Variel Ave.
Woodland Hills, CA 91367-9897
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The 4x1 DVIKVM Switcher is a trademark of Gefen Inc.
Macintosh is a trademark of Apple Computer Inc.
© 2006 Gefen Inc., All Rights Reserved
Notice
Page 3
TABLE OF CONTENTS
1
Introduction
2
Front Panel Descriptions
3
Back Panel Descriptions
4
How To Connect The 4x1 DVIKVM Switcher
5
RMT-4IR
6
Wiring Diagram
7
System Specifi cations
8
Warranty
Page 4
INTRODUCTION
Thank you for purchasing Gefen’ s 4x1 DVIKVM Switcher series. The 4x1 DVIKVM
Switcher switches DVI, USB and audio between any combination of four computers. Now
you can switch easily and reliably between any combination of four computers using one
DVI display and USB keyboard and mouse. The 4x1 DVIKVM Switcher is switched using
the RMT-4IR.
The 4x1 DVIKVM Switcher saves space – there’s no need to work on a desk crowded with
four monitors, keyboards and mouse devices. It saves time – there’s no need to move from
one monitor to another to access different computers. And it saves money – there’s no need
to purchase additional monitors, mouse devices, keyboards etc. The 4x1 DVIKVM Switcher
allows you to choose between any combination of Macintosh or PC computers.
CONTENTS
The 4x1 DVIKVM Switcher system consists of:
--- (1) 4x1 DVIKVM Switcher
--- (1) RMT4-IR remote control
--- (1) 5 VDC power supply
--- (4) DVI cables (6FT)
--- (4) USB cables (6FT)
--- (4) Audio cables (6FT)
--- (1) User Manual
Note
• The 4x1 DVIKVM Switcher is housed in a metal box for better RF shielding.
1
Page 5
FRONT PANEL DESCRIPTIONS
Power LED
1-4 Selector Buttons
1-4 Indicator LED
Infrared Eye
2
Page 6
BACK PANEL DESCRIPTIONS
USB INPUTS 1-4
Remote
Contact Closure
For RMT-4 Wired
RJ-45 Connector
USB OUT
Input For
External IR
EXT-RMT-EXTIR
Remote Extender
AUDIO OUT
AUDIO INPUTS 1 - 4
DVI OUT
DVI IN 4
DVI IN 3
DVI IN 2
DVI IN 1
INPUT
POWER
3
Page 7
HOW TO CONNECT THE 4x1 DVIKVM Switcher
Connect your computers DVI, USB, and audio to the 4x1 DVIKVM Switcher inputs
1
using the supplied cables.
Connect your DVI display to the DVI output of the 4x1 DVIKVM Switcher.
2
Connect your USB and audio devices to the USB and audio outputs.
3
Connect the RMT-4 remote control (if applicable).
4
Connect the External IR Extender to the RJ-45 port (if applicable).
5
Plug the 5VDC power supply into the 4x1 DVIKVM Switcher.
6
Your computers must be turned on one at a time and the switcher must be selected
to the computer that is booting up. After one computer completes the startup process,
you can boot up the second computer and repeat the process with the remaining
computers.
4
Page 8
RMT-4IR
1. Remove battery cover from the back of the RMT4-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will fl ash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT4-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
5
Page 9
4X1 DVI/ADC WIRING DIAGRAM
6
Page 10
SPECIFICATIONS
Video Amplifi er Bandwidth ................................................................................. 1.65 GHz
Single Link Range ......................................................................................... 1920 x 1200
Vertical Frequency Range ....................................................................................... 60 Hz
DVI Input/Output Connector Type ............................................................................. DVI-I
USB Input Connector .......................................................................................... Type “B”
USB Output Connector ........................................................................................ Type “A”
Power Consumption ................................................................................ 15 Watts (max.)
Power Supply .......................................................................................................... 5VDC
Dimensions ...................................................................................... 17”W x 1.75”H x 4”D
Rackmountable .......................................................................................... 1 Rack Space
Shipping Weight ..................................................................................................... 10 Lbs
7
Page 11
WARRANTY
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within one (1)
year from the date of shipment, Gefen System will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical, electrical
or other abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of shipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose, all
of which are expressly disclaimed.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental,
or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the 4x1 DVIKVM Switcher features and specifi cations is subject to change
without notice.
8
Page 12
Page 13
*ma-dvikvm-441*
6265 Variel Avenue Woodland Hills, CA 91367
1-800-545-6900 818-884-6294 fax: 818-884-3108
www.gefen.com gsinfo@gefen.com
Loading...