Switches extended desktop dual VGA displays, USB 1.1 & audio between
any two computers
Our 2x2 VGA Switcher enables you to connect and access two computers using one workstation
equipped with dual VGA monitors and one USB keyboard/mouse. Analog video, keyboard/mouse
control and audio are "switched" for each computer, providing you with an easy and effective way
to alternate access to greater amounts of data at the touch of a button.
Dual monitors, in this case, refers to the use of two monitors that are running an extended desktop
setup so that the entire digital image is extended over two monitors providing a greater digital
desktop on which to work. The 2x2 switcher will not mirror the same desktop but will provide
support for dual displays.
The 2x2 switcher will NOT switch between four computers and two displays or four computers and
one display.
How It Works
You simply connect both computer's VGA video, USB and audio ports to the 2x2 VGA Switcher's
inputs using the supplied cables. Then you connect both VGA displays, the USB keyboard/mouse
and an optional audio device to the Switcher's outputs. Once powered and connected, you switch
between computers by key switch or remotely using contact closure remote control.
Note:
Features:
z Switches easily between any two dual VGA computers with USB 1.1 and audio
z Output to two extended desktop VGA displays
z Maintains highest 1920 x 1200 resolution video
z Use either PC or Mac USB 1.1 keyboard/mouse
z Front panel switching
z Parallel remote port (RMT-4 not included)
z Supports resolutions up to 1080p, 2K, 1920 x 1200
z Includes rack ears
Specifications:
z Video Amplifier Bandwidth: 350 MHz
z Input Video Signal: 1.2 volts p-p
z Input Sync Signal: 5 volts p-p (TTL)
z Horizontal Frequency Range: 15 - 70 KHz
z Vertical Frequency Range: 30 - 170 Hz
z Video Connector: DVI-I 29 pin female (analog only)
z USB Input Connection: type "B"
z USB Output Connection: type "A"
z Power Supply: 12V AC
z Power Consumption: 18 watts (max)
z Dimensions: 17"W x 1.75"H x 4.375"D
z Rackmountable: 1U Rack space
z Shipping Weight: 10 lbs.
Package Includes:
z 2x2 VGA Switcher
z 12V power supply
z Four 6ft DVI-A to VGA cables Male to Male
z Two DVI-A to VGA Adapter Male to Female
z Two 6ft USB cables
z Two audio cable
z Rack Ears
Product Options:
ext-vga-422
EXT-VGA-422
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
• The 2x2 VGA Switcher is housed in a metal box for better RF shielding.
Page 6
INTRODUCTION
Thank you for purchasing Gefen’ s ex•tend•it 2x2 VGA Switcher series. The 2x2 VGA
Switcher switches VGA, USB and Audio between any combination of two computers.
Now you can switch easily and reliably between any combination of two computers using
two VGA displays, USB keyboard and mouse.
The 2x2 VGA Switcher saves space – there’s no need to work on a desk crowded with
four monitors, keyboards and mouse devices. It saves time – there’s no need to move
from one monitor to another to access different computers. And it saves money – there’s
no need to purchase additional monitors, mouse devices, keyboards etc.
The 2x2 VGA Switcher allows you to choose between any combination of Macintosh or
PC computers and switching two monitors side by side.
CONTENTS
The 2x2 VGA Switcher system consists of:
(1) 2x2 VGA Switcher
(1) 12 VAC power supply
(4) DVI to VGA cables (6FT)
(2) DVI to VGA Adapters
(2) USB cables (6FT)
(2) Audio cables (6FT)
(1) User Manual
1
Page 7
FRONT PANEL DESCRIPTIONS
1-2 Switch Buttons
Power LED
1-2 Indicator LED
2
Page 8
BACK PANEL DESCRIPTIONS
AUDIO OUT
REMOTE -
Remote
For RMT-4 Wired
RJ-45 Connecter
4 USB INPUTS
USB OUT
DVI OUT 2
DVI OUT 1
AUDIO IN 2
AUDIO IN 1
DVI IN 1-1 DVI IN 1-2DVI IN 2-1 DVI IN 2-2
INPUT
POWER
3
Page 9
HOW TO CONNECT THE 2x2 VGA Switcher
1- Connect the cables from your fi rst computer into the VGA-1 1, VGA-1 2, USB and
Audio connection in the back of the 2x2 VGA Switcher.
2- Connect the cable from your second computer into the VGA-2 1, VGA-2 2, USB and
Audio connection in the back of the 2x2 VGA Switcher.
3- Connect the monitors to the VGA Out (1 and 2) connections.
4- Plug the 12v power supply into the 2x2 VGA Switcher.
5- Plug the 12v wallmount power supply into the wall outlet.
6- Start your computers only after you’ve made all the connections.
7- Press select, to switch between Computer 1 or Computer 2 or switch remotely using
the optional contact closure remote control.
4
Page 10
2x2 VGA WIRING DIAGRAM
6
Page 11
SPECIFICATIONS
Video Amplifi er Bandwidth ................................................................................. 350 MHz
Single Link Range ......................................................................................... 1920 x 1200
Vertical Frequency Range ....................................................................................... 60 Hz
DVI Input/Output Connector Type ............................................................................. DVI-I
USB Input Connector .......................................................................................... Type “B”
USB Output Connector ........................................................................................ Type “A”
Power Consumption ................................................................................ 18 Watts (max.)
Power Supply ....................................................................................................... 12 VAC
Dimensions ...................................................................................... 16”W x 1.75”H x 4”D
Rackmountable .......................................................................................... 1 Rack Space
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year
from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment,
provided that the equipment has not been subjected to mechanical, electrical, or other
abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose, all
of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental,
or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the 2x2 VGA Switcher features and specifi cations is subject to change without
notice.
8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.