GE Digital IC694ALG232, IC694ALG233, IC695ALG600, IC695ALG608, IC695ALG616 Data sheet

Process Automation Control Systems

PACSystems RX3i Controller

Analog I/O Modules (Input)

GE offers easy-to-use analog modules and HART analog modules for control processes such as
flow, temperature and pressure.

IC694ALG232 IC694ALG233 IC695ALG600

PACSystems RX3i

Analog Input, Voltage, High Density

(16 Channel) 16 Bit with

Product Name

Lifecycle Status Active Active Active

Module Type

Backplane Support No Backplane Restrictions No Backplane Restrictions Universal Backplane Only. Uses PCI Bus.

Number of Slots Module
Occupies on Backplane

Range

HART Support

advanced diagnostics

Analog Input Analog Input Universal Analog Input

1 1 1

-10 V to +10 V, 0 to 10 V 0-20 mA, 4-20 mA,

N/A N/A N/A

PACSystemsRX3i

Analog Input, Current, High Density

(16 Channel) 16 Bit with

advanced diagnostics

4-20 mA Enhanced

PACSystems RX3i Analog Input.

Configurable per channel for Current,

Voltage, RTD, Thermocouple and

Resistive. High Density (8 Channel)

Requires High Density Terminal Block

(IC694TBB032 or IC694TBS032). Cold

Junction Compensation are available

for Thermocouple configurations

(IC695ACC600 contains 2 CJCs)

Voltage: +50 mV, +150 mV, 0–5 V, 1–5 V,

0–10 V, +10 V; Current: 0–20 mA, 4–20 mA,

+20 mA; Thermocouple Inputs: B, C, E, J, K, N, R,

S, T; RTD Inputs: PT 385 / 3916, N 618 / 672, NiFe

518, CU 426: Resistance Inputs: 0 to 250 / 500 /

1000 / 2000 / 3000 / 4000 Ohms

Channel-to-Channel
Isolation

Number of Channels 16 Single Ended, 8 Differential 16 8

Single Ended: 5 ms for all channels

Update Rate

Resolution

Accuracy

Input Impedance

Input Filter Response

Notch Filter N/A N/A Yes

Diagnostics

Internal Power Used

External Power Requirement

Connector Type

Differential: 3 ms all channels

16 bit; ±10 V, 0.3125 mV, 1 LSB;

0-10 V, 0.3125 mV, 1 LSB

500K Ohms (single-ended mode)

1 MegaOhms (differential mode)

23 Hz (single-ended mode)

38 Hz (differential mode)

Under Range/Over Range,

Positive/Negative Rate of Change, High,

High-High, Low, Low-Low

112 mA (maximum) @ +5 VDC 120 mA @ +5 VDC 400 mA @ 5 V; 350 mA @ 3.3 V

110 mA (maximum) +24 VDC supply

connected to TB1 on IC695CHSxxx

Terminal Block (20 screws),

No No Two Groups of Four

6 ms all channels 10ms per Channel; 4 Channels = 40ms (1KHz

16 bit; 0-20 mA, 0.625 µA/bit;
4-20 mA, 0.5 µA/bit; 4-20 mA

Enhanced, 0.5 µA/bit

0.25% at 25ºC (77ºF) 0.25% at 25ºC (77ºF) Calibrated Accuracy at 25°C.

250 ohms Current 249 ohms ±1%

23 Hz Configurable: 8Hz, 12Hz, 16Hz,

Under Range/Over Range, Open Wire,

Positive/Negative Rate of Change, High,

High-High, Low, Low-Low

65 mA @ 24 VDC N/A

included with module.

Terminal Block (20 screws),

included with module.

filter) 127ms per Channel 4 Channels = 508ms

(8Hz filter) Channels that are disabled

are not scanned, shortening scan time.

11 to 16 bits, depending on configured

range and A/D filter frequency

Better than 0.1% of range (except

10 ohm CU RTD) Accuracy depends

on A/D filter, data format, input noise,

and ambient temperature.

40Hz, 200Hz, 1000Hz

Open Wire, Short Circuit,

Positive/Negative Rate of Change,

High, High-High, Low, Low-Low

IC694TBBx32 or IC694TBSx32.

Sold Separately.

www.geautomation.com

Automation & Control Systems

1.15

PACSystems RX3i Controller

Process Automation Control Systems

Analog I/O Modules (Input)

GE offers easy-to-use analog modules and HART analog modules for control processes such as
flow, temperature and pressure.

IC695ALG608 IC695ALG616 IC695ALG628

PACSystems RX3i Analog Input.

Configurable per channel for Current

or Voltage. High Density (8 Channel)

Product Name

Lifecycle Status Active Active Active

Module Type

Backplane Support Universal Backplane Only. Uses PCI Bus. Universal Backplane Only. Uses PCI Bus. Universal Backplane Only. Uses PCI Bus.

Number of Slots Module
Occupies on Backplane

Range

Requires High Density Terminal Block

(IC694TBB032 or IC694TBS032).

Analog Input Analog Input Analog Input with HART Communications

1 1 1

Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;

Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V

PACSystems RX3i Analog Input.
Configurable per channel for Current
or Voltage. High Density (16 Channel)
Requires High Density Terminal Block

(IC694TBB032 or IC694TBS032).

Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;

Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V

PACSystems RX3i Analog Input

with HART Communications.

Configurable per channel for Current

or Voltage. High Density (8 Channel)

Requires High Density Terminal Block

(IC694TBB032 or IC694TBS032).

Current: 0 to 20 mA, 4 to 20 mA, ±20 mA;

Voltage: ±10 V, 0 to 10 V, ±5 V, 0 to 5 V, 1 to 5 V

HART Support

Channel-to-Channel
Isolation

Number of Channels 8 16 8

All 8 Channels at 5 msec @ 500Hz.

Update Rate

Resolution

Accuracy

Input Impedance

Input Filter Response

Notch Filter Yes Yes Yes

Diagnostics

Internal Power Used

External Power Requirement

Connector Type

Performance is dependent on filtering.

32-bit IEEE floating point or 16-bit integer

(in 32-bit field) input data format

Calibrated Accuracy @ 13°C – 33°C with

8 Hz, 12 Hz and 16 Hz filter; 0 to 10 V,

±10 V input types: 10 mV0 to 5 V, 1 to 5 V,

±5 V input types: 5 mV0 to 20 mA,

4 to 20 mA, ±20 mA input types: 20 µA

Configurable: 8Hz, 12Hz, 16Hz,

Open wire, short circuit, positive/negative rate

of change, High, High-High, Low, Low-Low

450 mA @ 5 V; 600 mA @ 3.3 V 450 mA @ 5 V; 600 mA @ 3.3 V 450 mA @ 5 V; 600 mA @ 3.3 V

IC694TBBx32, IC694TBSx32 or IC694TBC032

N/A N/A Get HART Device Information (Function 1)

One Group of Eight One Group of Sixteen One Group of Eight

All 16 Channels at 9 msec @ 500Hz.

Performance is dependent on filtering.

32-bit IEEE floating point or 16-bit integer

(in 32-bit field) input data format

Calibrated Accuracy @ 13°C – 33°C with

8 Hz, 12 Hz and 16 Hz filter; 0 to 10 V,

±10 V input types: 10 mV0 to 5 V, 1 to 5 V,

±5 V input types: 5 mV0 to 20 mA,

4 to 20 mA, ±20 mA input types: 20 µA

Current 249 ohms ±1% Current 249 ohms ±1% Current 249 ohms ±1%

40Hz, 200Hz, 500Hz

N/A N/A N/A

Sold Separately.

Configurable: 8Hz, 12Hz, 16Hz,

40Hz, 200Hz, 500Hz

Open wire, short circuit, positive/negative rate

of change, High, High-High, Low, Low-Low

IC694TBBx32, IC694TBSx32 or IC694TBC032

Sold Separately.

Simplified HART Pass-Thru Command (Function 2)
Enterprise HART Pass-Thru Command (Function 3)

All 8 Channels at 5 msec @ 500Hz.
Performance is dependent on filtering
and HART enabled channels could add

6 to 8 seconds.

Selectable per channel

Calibrated Accuracy @ 13°C – 33°C

with 8 Hz, 12 Hz and 16 Hz filter;

0 to 10 V, ±10 V input types: 10 mV0 to

5 V, 1 to 5 V, ±5 V input types: 5 mV0 to 20 mA,

4 to 20 mA, ±20 mA input types: 20 µA

Configurable: 8Hz, 12Hz, 16Hz,

40Hz, 200Hz, 500Hz

Open wire, short circuit, positive/negative rate

of change, High, High-High, Low, Low-Low

IC694TBBx32 or IC694TBSx32.

Sold Separately.

Automation & Control Systems

1.16

www.geautomation.com