Geberit ACO 202 Operation Manual
ACO 202
www.inrusstrade.ru
Operation
Manual
Betriebsanleitung
Manuel d’utilisation
Istruzioni di funzionamento
A
CD
B
www.inrusstrade.ru
EN
18
B971-003 © 06-2015
965.598.00.0 (02)
Translation of the original operating instructions
Safety
Target group
This tool may only be used by skilled persons in accordance with EN IEC 82079-1:2012.
Intended use
The Geberit pressing tool ACO 202 is only allowed to be used for pressing pipes and
pressfittings of the Geberit Mepla and Geberit Mapress pressing systems.
Only Geberit pressing attachments (pressing jaws, adapter jaws, pressing collars) with the
compatibility mark may be used with the ACO 202 pressing tool. The relevant overviews
regarding compatibility and the maximum pressing areas can be found in the country-specific
product range catalogues.
The Geberit pressing tool is not suitable for continuous operation. After 30 minutes of
continuous operation, a break of at least 15 minutes must be taken to allow the pressing tool
to cool.
Any other use or a use extending beyond the intended application is deemed to be improper.
Geberit will not accept any liability for any resulting damage.
Basic safety notes
WARNING: Risk of injury caused by flying fragments if used incorrectly or if worn or
damaged pressing attachments are used
• Only use the pressing attachments (pressing jaws, pressing collars, adapter jaws) if they
are in perfect working order
• Examine the pressing attachments regularly before and after each use for defects,
particularly for incipient cracks in the pressing contour and the retaining bracket, and also
for other damage. If there are cracks in the material, take the entire pressing attachment
out of service immediately and do not use it again
• Do not use a pressing attachment again after it has been used incorrectly or in a way that
does not comply with its intended use. Instead, hand it over to an authorised repair shop
for testing
• Adhere strictly to maintenance regulations and maintenance intervals for the pressing tool
and pressing attachments
• Wear suitable protective equipment (protective goggles etc.)
• Only have repair work carried out by Geberit or an authorised repair shop
• Follow the country-specific safety regulations
• Read through and note all safety notes and instructions relating to the pressing tool and
pressing attachments before commissioning. Failure to observe the safety notes and
instructions can lead to electric shock, fire and/or serious injuries. Store all safety notes
and instructions for the future
www.inrusstrade.ru
EN
19
B971-003 © 06-2015
965.598.00.0 (02)
NOTE
Pressing attachments (pressing jaws, pressing collars, adapter jaws) are wearing parts.
Frequent pressing will cause the material to become worn; advanced stages of wear will be
indicated by incipient cracks. Pressing attachments that display this kind of wear or are
damaged in any other way may break, particularly if they are used incorrectly (e.g. pressing a
fitting that is too large, tilting, foreign bodies on the fitting) or in a way that does not comply
with their intended use.
Explanation of symbols
Tabelle 1: Symbols in the instructions
Tabelle 2: Symbols on the product
Symbol Meaning
WARNING Refers to a potentially dangerous situation that may cause serious injury
or death
CAUTION Refers to a potentially dangerous situation that may cause slight or
moderate injury or material damage
Refers to important information
Symbol Meaning
Refers to a potentially dangerous situation caused by flying fragments
that may cause serious injury or death
Read the safety notes and operating instructions before commissioning
the device
Service sticker: indicates the time of the next mandatory maintenance
www.inrusstrade.ru
EN
20
B971-003 © 06-2015
965.598.00.0 (02)
Product description
Structure
The Geberit pressing tool consists of:
• pressing tool incl. operating instructions
• pressing jaws or
• adapter jaws with pressing collars
• battery charger incl. user manual
• rechargeable battery 12 V DC
• safety notes
• transport case
The equipment may vary depending on the scope of delivery.
1 Pressing tool
2 Pressing jaw
3 Retaining pin
4 Roller drive
5 Charge level indicator
6 Rechargeable battery
0
2
1
3
4
6
5
www.inrusstrade.ru
EN
21
B971-003 © 06-2015
965.598.00.0 (02)
Function
1Green LED
2Red LED
3 Start button
4 Unlocking button
0
The Geberit pressing tool functions electrohydraulically. An automatic pressing function
makes sure that the press connection is completely finished. For safety reasons, the
automatic pressing function is not activated until a certain press capacity has been attained
(after approx. two seconds). The pressing sequence then continues automatically and can
only be interrupted by pressing the unlocking button [4]. Pressing the start button [3] again
restarts the pressing sequence. If the pressing sequence is interrupted, the pressing tool
stops in the position that has been reached. Pressing the unlocking button [4] causes the
piston in the pressing tool to return. The pressing tool can then be released from the pipeline.
The two LEDs [1] [2] show the operating states of the pressing tool. The pressing tool is
ready for operation when the green LED [1] is lit. The red LED [2] or the flashing green
LED [1] indicate malfunctions. If the Geberit pressing tool is not used for 30 minutes, it
switches to standby mode. No LED is lit. To start the pressing tool, briefly press the start
button [3].
4
3
1
2
www.inrusstrade.ru
Loading...