GearWrench - Apex Tool Group MEASURING AND INSPECTION Catalog Page

MEASURING AND INSPECTION

6" Pocket Stainless Steel Rule

■ Stainless Steel Flexible Blade

■ One Side - 32nd Inch, One Side - 1mm

Cat. No. UPC No. Packaging Product Weight Shelf Pack Qty.

2522D 082171025228 Boxed 0.05 lb 1

Angle Finder

■ Use Finder to Measure Angles of Most Parts Such As Frame

Angle (Pitch Forward or Backward) for Setting Truck Front Ends.

■ A Magnet in the Base Holds Tool in Place. It is Graduated in 1/2°

Increments.

Cat. No. UPC No. Packaging Product Weight Shelf Pack Qty.

2968D 082171029684 Boxed 0.80 lb 1

Hand-Held Tachometer

■ Tachometer Checks Diesels, Pumps, Compressors, Power Take-

Offs and Farm and Construction Equipment Revolution Speed

■ Tool is Ideal Where Electric Tachometer Cannot Be Used

■ To Use, Hold Rubber Tip Against End of Rotating Shaft and

12

Read Revolutions Per Minute Directly From Dial

■ Range is 100 to 4000 RPM (Clockwise or Counterclockwise)

■ Length: 4-1/4"

■ Diameter: 2-3/4"

Cat. No. UPC No. Packaging Description Product Weight Shelf Pack Qty.

2967 08217 10296 77 Carded Hand-Held Tachometer 0.75 lb 1

Mechanic’s Stethoscope

■ Stethoscope Locates the Source of Engine Noise Quickly

■ Listen for Trouble By Tracing the Sound of Flowing Water, Oil,

Gas or Steam

■ Identify Piston Slap, Worn Gears, Faulty Valves, Water Pump

Failure, Damaged Gaskets and Defective Bearings

■ Stethoscope Has a Shock-Resistant Handle and Disassembles

for Storage

MEASURING PRODUCTS

Cat. No. UPC No. Packaging Description Product Weight Shelf Pack Qty.

835D 082171008351 Carded Mechanic's Stethoscope 0.25 lb 1

1076