Surefire X-Series® Offset Flashlight Mount
Rev. 4-22-2014
GS-314x
Surefire X-Series® Offset Light Mount
USER MANUAL
Attaches to Picatinny Rails
NO-HASSLE WARRANTY:
Gear Sector™ guarantees our products
to be free from defect in workmanship
and materials for the lifetime of the
original owner. We will repair, replace or
refund your original purchase price of
this product, at our sole discretion, if it is
determined by us to be defective.
Normal wear and tear is not covered,
nor is damage resulting from abuse,
neglect, or altering this product from its
original state.
WARRANTY CLAIMS:
For repair or replacement, contact
Customer Service at: 877-556-4327 (toll
free). You will be required to complete a
returns form located on the returns page
of our website. Then package the
product carefully and return (no CODs,
please) to:
Gear Sector
Warranty Department
PO Box 47
Portage, IN 46368
Gear Sector™ will cover shipping costs
to return the product to you.
COUNTERFEIT WARNING:
There have been numerous reported
cases of counterfeit Gear Sector™
products on the market. They are most
often found at online auction sites and
local gun shows. These unauthorized
copies are difficult to discern visually.
However, be warned that they are made
of inferior base materials that can and
will fail.
We will not warranty counterfeit copies
of our products. If after speaking to
customer service, you choose to send
an item in for warranty repair and it is
found to be a counterfeit product, Gear
Sector™ will not pay to return the item.
If you want the item returned to you, you
will be required to pay return shipping.
To ensure that you get authentic,
competitively priced Gear Sector™
products, purchase them only from
www.gearsector.com or an authorized
Gear Sector™ reseller.
Surefire®, Magpul®, TangoDown® and
Vibra-Tite® are registered trademarks of
these respective companies. Mention of
these companies does not constitute
their endorsement of Gear Sector™.
PO Box 47, Portage, IN 46368-0047
www.gearsector.com
877-556-4327
Surefire X-Series® Offset Flashlight Mount
INTRODUCTION:
The Patented [US Patent No. D684,647]
Gear Sector™ offset flashlight mount
was designed to provide a low profile,
ergonomic solution for attaching a
weapon light to a Picatinny rail. We
designed the mount to fit perfectly flush
with the Tango Down® rail panels for an
uninterrupted rail space. This model fits
the Surefire X-Series® lights. It can also
be used to offset iron sights and MRDs.
It comes complete with all mounting
hardware, screws, hex keys, and VibraTite® to make installation fast and easy.
Mod 3 components feature an 1144
StressProof® heat treated full width
steel index.
Fits the following lights:
Surefire X300®
Surefire X300® Ultra
Surefire X400®
Surefire X400® Ultra
Streamlight TLR-1®
Streamlight TLR-2®
Streamlight TLR-3®
Streamlight TLR-4®
Streamlight TLR-VIR®
PACKAGE CONTENTS:
1ea. Surefire X-Series® Offset
Flashlight Mount
1ea. 9⁄64th hex key for securing
mount to rail system
1ea. Vibra-Tite® VC3™ anti-vibratory
compound.
MATERIALS & CONSTRUCTION:
Base Material: 6061-T6 Aluminum
Base Finish: Military Specification
(MIL-A-8625F) Type III, Class II Hard
Coat and/or Cerakote™
Index Material: 1144 StressProof®
heat treated steel
Index Finish: Nitrotec®
Weight: 1.28 ozs.
100% Berry Amendment Compliant
Proudly Made in the USA
WARNING: Confirm that weapon
is unloaded and on SAFE before
installation!
INSTALLATION:
1.Remove the socket head cap screw
and clamp from the GS-314x base.
2. Apply a drop of Vibra-Tite® VC3™
(included) to the threads on all
assembly screws and let sit until tacky
- approximately 2-3 minutes.
3.Determine orientation and location
where you plan to install the light on
your rail system.
4.Install your light to the GS-314x base
Picatinny rail using the factory mount
attached to your light. Check the
manufacturer’s specification for
recommended factory mount torque.
5.Install the mount onto your rail
system, insert screw / clamp assembly
and torque it down with the included
9/64ths hex key. Do not exceed
maximum torque of 40 inch pounds for
the cross bolt. If you do not have a
torque driver capable of measuring
inch pounds, simply finger tighten and
torque an additional 1⁄4 turn. Ignoring
this limit may damage your mount.
Surefire X-Series® Offset Flashlight Mount
CROSS BOLT
CLAMP
GS-314X BASE
THREADED INDEX
ROLL PIN
AVAILABLE OPTIONS:
Our Surefire X-Series® Offset Flashlight Mount is available in the following colors:
GS-3140 – Black
GS-3141 – Magpul® Flat Dark Earth
GS-3142 – Magpul® Foliage Green
GS-3143 – Magpul® Olive Drab
GS-3144 – Patriot Brown
Loading...