Ge appliances WCXH208, WSXH208, WPXH214, WCXH214 User Manual

GEAppliances.com

175D1807P379 49-90116-3 12-02 JR

350A4502P294 Rev. 1 134203500

Washers

Safety Instructions . . . . . . . . . . . . 3, 4

Operating Instructions

Control Panels . . . . . . . . . . . . . . . . . . 5

Control Settings . . . . . . . . . . . . . . . . . .5

Fabric Care Labels . . . . . . . . . . . . . . .10

Features . . . . . . . . . . . . . . . . . . . . . .6, 7

Loading and Using the Washer . . . .8, 9

Installation Instructions . . . . . .11–16

Drain Requirements . . . . . . . . . . . . .14

Electrical Requirements . . . . . . . . . .14

Installing the Washer . . . . . . . . . .15, 16

Location of Your Washer . . . . . . . . . .12

Preparing to Install Your Washer . . .11

Replacement Parts . . . . . . . . . . . . . . .16

Rough-In Dimensions . . . . . . . . . . . .12

Unpacking Your Washer . . . . . . . . . .13

Water Supply Requirements . . . . . . .14

Troubleshooting Tips . . . . . . . . .17–19

Customer Service

Service Telephone Numbers . . . . . . 22

Warranty for U.S. Customers . . . . . . 20

Warranty for Canadian Customers . . .21

Spacemaker

U.S. Models:

WSXH208 WPXH214

Canada Models:

WCXH208 WCXH214

Owner’s Manual &

Installation Instructions

As an ENERGY STAR®partner, GE has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

Customer Service

Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

GE & You, A Service Partnership.

FOR YOUR RECORDS

Write the model and serial numbers here:

You can find them at the top inside of the door opening.

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer.

READ THIS MANUAL

IF YOU NEED SERVICE

You’ll find many answers to common problems in the Before You Call For Service section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section.

Visit our Website at: GEAppliances.com

IMPORTANT!

Staple sales slip or canceled check here.

Proof of the original purchase date is needed to obtain service under the warranty.

Fill out the Consumer Product Registration Card.

Two easy ways to register your appliance!

■ Through the Internet at GEAppliances.com

■ Complete and mail the enclosed Product Registration Card

■ Install or store where it will not be exposed to

temperatures below freezing or exposed to the weather.

■ Properly ground washer to conform with all

governing codes and ordinances. Follow details in Installation Instructions.

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

The instructions in this manual and all other literature included with this washer are not meant to cover every possible condition and situation that may occur. Good, safe practices and caution MUST be applied when installing, operating, and maintaining any appliance.

WATER HEATER SAFETY

Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on

all hot water faucets and allowing them to run for several minutes. Do this before using any

electrical appliance

which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

PROPER INSTALLATION

This washer must be properly installed and located in accordance with the Installation Instructions before it is used.

■ Keep the area underneath and around your

appliances free of combustible materials such as lint, paper, rags and chemicals.

■ Do not leave the washer door open. An open door

could entice children to hang on the door or crawl inside the washer.

■ Close supervision is necessary if this appliance is

used by or near children. Do not allow children to play on, with, or inside this or any other appliance.

YOUR LAUNDRY AREA

Customer ServiceTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions

■ Never reach into washer while it is moving.

Wait until the machine has completely stopped before opening the door.

■ Do not mix chlorine bleach with ammonia or

acids such as vinegar and/or rust remover. Mixing different chemicals can produce a toxic gas which may cause death.

■ Do not wash or dry articles that have been

cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.

■ The laundry process can reduce the flame

retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

■ To minimize the possibility of electric shock,

unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. NOTE: Turning the Cycle Selector knob to an off position does NOT disconnect the appliance from the power supply.

■ Never attempt to operate this appliance if

it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

■ Do not slam the washer door closed or try

to force the door open when locked (Door Lock light ON). This could result in damage to the washer.

■ The washer is equipped with an electrical

overload protector. The motor will stop if it becomes overheated. The washer will automatically restart after a cool-down period of up to 30 minutes, if the washer has not been manually turned off during this time.

WHEN USING THE WASHER

■ Turn off water faucets to relieve pressure on

hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they should be replaced every 5 years.

■ Before discarding a washer, or removing it

from service, remove the washer door to prevent children from hiding inside.

■ Do not attempt to repair or replace any part of

this appliance unless specifically recommended in this Owner’s Manual, or in published userrepair instructions that you understand and have the skills to carry out.

■ Do not tamper with controls.

WHEN NOT IN USE

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

Use this appliance only for its intended purpose as described in this Owner’s Manual.

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

Customer Service

Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

About the washer control panel.

You can locate your model number at the top inside of the door opening.

7 TEMPERATURES EXTRA RINSE

COTTONS / EASY CARE / ULTRA CARE

ON OFF

DOOR

LOCKED

FINAL SPIN SPEED

RPM

PULL TO START / PUSH TO STOP

HOT

COLD

WARM WARM

WARM

COLD

COLD COLD

AutoTemp

FAST

850 450 650 850

NORMAL

950 650 850 950

HEAVY

PERM PRESS

DELICATES

MEDIUM

LIGHT

INAL SPIN

FINAL SPIN

COTTONS

QUICK WASH

ULTRA CARE

EASY CARE

COLD COLD

A R

O L D

WRINKLEFREE

AUTO DISPENSER SAFETY LATCH/SLIDE TO OPEN

Control Settings

Automatic Dispenser and Safety Latch

Safety latch slides to the right to open drawer. (Latch locks to the left on its own.) Add detergent, liquid bleach and fabric softener to this drawer.

Temperature

Select the water temperature for the wash and rinse cycles. Always follow garment manufacturer’s care label or instructions when laundering.

Wash Cycle

The wash cycle controls the length of the washing process. The chart below will help you match the wash cycle setting with your loads.

PREWASH For heavily soiled and protein-stained items. Follow PreWash with a complete wash cycle.

COTTONS For heavy to lightly soiled cottons, household linens, work and play clothes.

EASY CARE For wrinkle-free and permanent press items, and knits.

DELICATES/ For lightly soiled lingerie and special-care fabrics.

ULTRACARE

QUICK WASH For lightly soiled items you need in a hurry.

Final Spin Speed (on some models)

The Fast spin speed is for durable items.

The Normal spin speed is for delicate items like sweaters and lingerie. When using Normal spin speed, clothes will be less dry than when using Fast spin speed.

Set the desired wash cycle by pushing in cycle knob and turning clockwise.

Start the washer by closing the door and pulling out the cycle knob.

To stop the washer, push in the cycle knob and pull out to restart.

■ The washer will not operate with the door open.

■ The door will automatically lock during the entire wash cycle.

Features and appearance may vary.

Customer ServiceTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions

4 TEMPERATURES

WASH / RINSE

EXTRA RINSE

COTTONS / EASY CARE

DOOR

LOCKED

HOT

COLD

WARM WARM

WARM

COLD

COLD COLD

ON OFF

CYCLE SIGNAL

OFF LOUD

PULL TO START / PUSH TO STOP

HEAVY

LIGHT

MEDIUM

WASH

INAL SPIN

FINAL SPIN

PERM PRESS

FINAL SPIN

DELICATES

COTTONS

PREWASH

EASY CARE

KNITS

AUTO DISPENSER SAFETY LATCH/SLIDE TO OPEN

Models WPXH214 and WCXH214

Models WCXH208 and WSXH208

About the washer features. NOTE: Not all features are available on all washer models.

Cycle Signal (on some models)

When the Cycle Signal is ON it will sound at the end of the cycle. The signal can be set at OFF (no sound), LOUD or anywhere in between.

Extra Rinse (available on some cycles)

Use an extra rinse when additional rinsing is desired to remove excess dirt and detergent from soiled loads.

Door Locked Indicator Light

The indicator light is ON and the door is locked when the cycle knob is pulled out. The light turns OFF at the end of the cycle.

AutoTemp (on some models)

AUTO TEMP senses the incoming water temperature and adjusts the fill water to obtain the correct wash temperature. This feature is activated only when selecting a COLD or WARM wash temperature.

For example, if a COLD wash is selected, some warm water may be added to reach a temperature needed to better dissolve detergents. Often, detergents are not completely dissolved in very cold water, especially in cooler climates.

Customer Service

Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

CYCLE SIGNAL

OFF LOUD

EXTRA RINSE

COTTONS / EASY CARE

ON OFF

DOOR

LOCKED

The Dispenser Drawer

Slowly open the dispenser drawer by first sliding the safety latch to the right, then pulling the drawer out until it stops.

After adding laundry products, slowly close the dispenser drawer. Closing the drawer too quickly could result in early dispensing of the bleach and fabric softener.

You may see water in the bleach and fabric softener compartments. This is a result of the siphoning action and is part of the normal operation of the washer.

If the dispenser drawer is pulled out more than 1-1/2” when the washer is in operation, the washer will shut off. The DOOR LOCK indicator light will turn off and the door will be unlocked. Slowly close the drawer, and the washer will automatically resume operation.

The Liquid Bleach Compartment

If desired, measure out the recommended amount of liquid chlorine bleach, not to exceed 1/3 cup (80 ml) and pour

into the center compartment labeled “LIQUID BLEACH”

marked with this symbol .

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the bleach which could result in damaged clothes.

NOTE: Do not use powdered bleach in the dispenser.

The Fabric Softener Compartment

If desired, pour the recommended amount of liquid fabric softener into the compartment labeled “FABRIC SOFTENER” and marked with this symbol .

Dilute with water to the maximum fill line.

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes.

NOTE: Do not pour fabric softener directly on the wash load.

The Detergent Compartment

■ Add measured detergent to the

detergent compartment of the dispenser drawer.

■ Detergent is flushed from the

dispenser at the beginning of the cycle. Either powdered or liquid detergent can be used.

NOTE: Liquid detergent will drain into the washer drum as it is added.

■ Low sudsing detergent is recommended for this washer. Use the manufacturer’s recommended amount.

■ Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. Avoid using too much detergent in your washer as it can lead to oversudsing and detergent residue being left on the clothes.

Customer ServiceTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions

Care and Cleaning

Loading and using the washer. Always follow fabric manufacturer’s care label when laundering.

Sorting Wash Loads

Loading the Washer

Wash drum may be fully loaded with loosely added items. Do not wash fabrics containing

flammable materials (waxes, cleaning fluids, etc.).

To add items after washer has started, push in cycle knob and wait until there is no longer any water on the door window. Do not force open the locked door; open gently. Add items, close the door and pull cycle knob out to restart.

Colors

Whites

Lights

Darks

Soil

Heavy

Normal

Light

Fabric

Delicates

Easy Care

Sturdy Cottons

Lint

Lint Producers

Lint Collectors

■ Combine large and small items in a load. Load large items first. Large items should not be more than half the total

wash load.

■ Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

Exterior: Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.

Interior: Dry around the washer door opening, flexible gasket and door glass. These areas should always be clean to ensure a water tight seal.

Moving and Storage: Ask the service technician to remove water from drain pump and hoses. Do not store the washer where it will be exposed to the weather. When moving the washer, the tub should be kept stationary by using the brackets and bolts removed during installation. See Installation Instructions in this book. If these parts are not available, they can be ordered in the United States by visiting our Website at GEAppliances.com or by calling 800.GE.CARES. In Canada, write to Manager, Consumer Relations, Camco Inc., 1 Factory Lane, Suite 310, Moncton, N.B. E1C 9M3.

Long Vacations: Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be below freezing.

Sort laundry into loads that can be washed together.

Customer Service

Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Dispenser Drawer Area: Detergent and fabric softener may build up in the dispenser drawer. Residue should be removed once or twice a month.

■ Remove the drawer by first sliding the safety latch to the right, then pulling the drawer out until it stops. Reach back into the left rear corner of the drawer cavity and press down firmly on the lock tab, pulling out the drawer.

■ Remove the inserts from the bleach and fabric softener compartments. Rinse the inserts and the drawer with hot water to remove traces of accumulated laundry products.

■ To clean the drawer opening, use a small brush to clean the recess. Remove all residue from the upper and lower parts of the recess.

■ Return the bleach and fabric softener inserts to the proper compartments. Replace the dispenser drawer and run the PREWASH or QUICK WASH cycle without any wash load in the drum.

Lock tab is visible only after drawer has been pulled out

Customer ServiceTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions

About the washer features.

Fabric Care Labels

Machine wash cycle

Normal

Permanent Press/

wrinkle resistant

Gentle/

delicate

Hand wash

Do not wash Do not wring

Water temperature

Hot

(50°C/120°F)

Warm

(40°C/105°F)

Cold/cool

(30°C/85°F)

Tumble dry

Dry

Normal

Permanent Press/

wrinkle resistant

Gentle/

delicate

Do not tumble dry

Do not dry (used with

do not wash)

Heat setting

High

Medium

Low

No heat/air

Special instructions

Line dry/

hang to dry

Drip dry

Dry flat

In the shade

Bleach symbols

Any bleach

(when needed)

Only non-chlorine bleach

(when needed)

Do not bleach

Below are fabric care label “symbols” that affect the clothing you will be laundering.

WASH LABELS

DRY LABELS

BLEACH LABELS

Customer Service

Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Customer Service

Troubleshooting Tips Installation Instructions Safety InstructionsOperating Instructions

Installation

Spacemaker Washer

Instructions

Models WCXH208

WCXH214 WSXH208 WPXH214

If you have any questions, call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com In Canada, call 1.800.361.3400 or visit our Website at: geappliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•

IMPORTANT – Save these

instructions for local inspector’s use.

•

IMPORTANT – Observe all

governing codes and ordinances.

• Note to Installer – Be sure to leave these

instructions with the Consumer.

• Note to Consumer – Keep these instructions

for future reference.

• Skill level – Installation of this appliance requires basic mechanical and electrical skills.

• Completion time – 1-3 hours

• Proper installation is the responsibility of the

installer.

• Product failure due to improper installation is not covered under the Warranty.

WARNING

• This appliance must be properly grounded and

installed as described in these Installation Instructions.

• Do not install or store appliance in an area where it

will be exposed to water/weather. See Location of Your Washer section.

• NOTE: This appliance must be properly grounded,

and electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.

FOR YOUR SAFETY:

TOOLS REQUIRED FOR WASHER INSTALLATION

❏ 1/4″ nut driver

❏ 3/8″ socket with ratchet

❏ 3/8″ open-end wrench

❏ Adjustable wrench or 7/16″ socket with ratchet

❏ Adjustable wrench or 9/16″ open-end wrench

❏ Channel-lock adjustable pliers

❏ Carpenter’s level

❏ Water Hoses (2)

PARTS SUPPLIED

❏ Cable Tie

❏ Rubber Washers (4)

LOCATION OF YOUR WASHER

Do Not Install the Washer:

1. In an area exposed to dripping water or outside

weather conditions. The ambient temperature should never be below 60°F (15.6°C) for proper washer operation.

2. In an area where it will come in contact with curtains or drapes.

3. On carpet. The floor MUST be a hard surface with a maximum slope of 1/2″ per foot (1.27 cm per 30 cm). To make sure the washer does not vibrate or move, you may have to reinforce the floor.

IMPORTANT:

Minimum Installation Clearances

• When installed in alcove: Sides, Rear, Top = 0″ (0 cm)

• When installed in closet: Sides, Rear, Top = 0″ (0 cm), Front = 1″ (2.54 cm)

• Closet door ventilation openings required: 2 louvers each 60 square in. (387 cm2), located 3″ (7.6 cm) from top and bottom of door

Undercounter Installation

If an undercounter* installation is desired, you MUST install a top sheet kit, 14-A037. This kit is available through your GE retailer.

*Custom-sized countertop is required.

Mobile Home Installation

Installation must conform to Standard for Mobile Homes, ANSI A119.1 and National Mobile Home Construction and Safety Standards Act of 1974 (PL93-383).

Installation Instructions

ROUGH-IN DIMENSIONS

(43.2)

(1.9)

Adjustable Legsinch (cm)

(29.8)

24 1

(62.9)

SIDE

(67.9)

(152.4)

(2.54)

(3.81)

(7.3)

Power

Cord

(85)

(91.5)

Under

Counter

(87.9)

BACK

Water Inlets

(80.3)

9. Remove the large Styrofoam block located under the drum. Lift up on the drum, tilt the base of the foam block inwards toward the rear of the washer until free, and then pull the block out.

10. Remove and discard the yellow ribbon and label from the front of the washer.

11. From the rear of the washer, carefully pull out the power supply cord through the hole in the backsheet.

12. Replace the service panel and screws.

Save all bolts, washers, spacers, brackets, clamps, and blocks for future use.

NOTE: If you must transport the washer at a later date,

you must reinstall the shipping support hardware to prevent shipping damage. Keep the hardware in the plastic bag provided.

Installation Instructions

UNPACKING THE WASHER

WARNING: Destroy the carton and plastic

bags after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible to children.

1. Cut the shipping carton along the dotted line at the base of the unit.

2. While it is in the carton, carefully lay the washer on its back side.

3. Remove the styrofoam base.

4. Carefully return the washer to an upright position and

remove the carton.

5. Carefully move the washer to within 4 feet (122 cm) of the final location.

6. Remove the following from the back side of the washer:

4 bolts 4 yellow plastic spacers 3 metal “P” clamps

7. Remove the service panel from the front of the washer.

8. Remove the 4 nuts and 6 large washers that attach the 2 yellow shipping braces to the drum and the base. Lift up on the drum and remove the braces (a yellow ribbon surrounds the items to be removed). These braces must be removed to allow the power supply cord to be released from the shipping ring.

NOTE: Failure to remove the shipping braces can cause

the washer to become severely unbalanced.

BOLT

SPACER

"P" CLAMP

Installation Instructions

ELECTRICAL REQUIREMENTS

CIRCUIT – Individual, properly polarized and grounded 15-amp branch circuit fused with 15-amp time-delay fuse or circuit breaker.

POWER SUPPLY – 2-wire, with ground, 120-volt, singlephase, 60-Hz, Alternating Current.

OUTLET RECEPTACLE – Properly grounded 3-prong receptacle to be located so the power supply cord is accessible when the washer is in an installed position.

WARNING: Improper connection of the

equipment grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded.

1. The washer MUST be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electrical current.

2. Since your washer is equipped with a power supply cord having an equipment-grounding conductor and a grounding plug, the plug MUST be plugged into an appropriate, copper-wired receptacle that is properly installed and grounded in accordance with all local codes and ordinances or in the absence of local codes, with the National Electrical Codes, ANSI/NFPA 70 (latest edition). If in doubt, call a licensed electrician. DO NOT cut off or alter the grounding prong on the power supply cord. In situations where a two-slot receptacle is present, it is the owner’s responsibility to have a licensed electrician replace it with a properly

grounded three-prong grounding-type receptacle.

Read these instructions completely and carefully.

GROUNDING REQUIREMENTS

WATER SUPPLY REQUIREMENTS

Hot and cold water faucets MUST be installed within 42 inches (107 cm) of your washer’s water inlet. The faucets MUST be 3/4″ (1.9 cm) garden hose-type so inlet hoses can be connected. Water pressure MUST be between 10 and 120 pounds per square inch (maximum unbalanced pressure, hot vs. cold, 10 psi.) Your water department can advise you of your water pressure. The hot water temperature should be set to deliver water at 120° to 140°F (48°–60°C).

DRAIN REQUIREMENTS

1. Drain capable of eliminating 17 gals (64.3 L) per minute.

2. A standpipe diameter of 1 1/4″ (3.18 cm) minimum.

3. The standpipe height above the floor

should be:

Minimum height: 24″ (61 cm) Maximum height: 96″ (244 cm)

NOTE: The drain hose attached to the washer can reach a 58″ (147 cm) high standpipe. For a higher standpipe, contact an authorized parts distributor. If the drain is less than 24″ (61 cm), install a siphon break kit, available at your local hardware store.

96 in.

(244 cm)

Max.

24 in.

(61 cm)

Min.

BACK

+ 30 hidden pages