®
GE Monogram
36" and 48" Outdoor Cooking Center
Grill Carts
Models ZX36CTYSS/ZX48CTYSS
Assembly Instructions
Before you Begin – Read these instructions completely and carefully.
Note To Installer: Be sure to leave these instructions with the Consumer.
Note to Consumer: Keep these instructions with your Use and Care Book for future reference.
If you have questions concerning the installation of
this product, call the GE Answer Center® Consumer
Information Service at 800.626.2000, 24 hours a day,
7 days a week.
If you received a damaged Grill Cart, you should
contact your dealer.
Step 1:
Remove
Open the box and remove the contents.
Remove packaging and protective film from
shelves.
Packaging
Locate the hardware accessory package and
check contents.
10-24 x 1-1/2 Screws
Count 4
Assembly of this grill cart requires basic mechanical
skills. Proper assembly is the responsibility of the
installer.
NOTE:
The shelves must be installed on the cart before the
grill is mounted and before any gas connections are
made.
Aluminum Spacers
Count 4
Phillips Head Screws
Count 6
1/4-20 Nuts
Count 4
Left and Right Hand
Shelves
Installation
36" and 48" Grill Cart Assembly
Tools
You Will
Need
Step 2:
Install
Side Shelves
• 3/8" wrench or socket
• Phillips head screwdriver
• Gloves to protect against sharp edges
A
•Remove the top screw in the front shelf slide
on the left and right sides. Retain screws.
NOTE: One shelf is marked “R/H Shelf”. Be
sure to use that shelf on the right side of the
cart.
CAUTION: The grill is extremely heavy. 2
people are required to lift and place the grill
onto the cart.
C
•When the shelf reaches stops at the top,
fold the shelf out horizontally.
•The shelf should rest securely in the channels.
•Install the long 10-24 screws and spacers
below the shelf supports. Secure with nuts
on the inside of the cart. (2 on each side.)
•The spacers and screws will prevent the
shelf from sliding out of the channels when
folded down.
B
•Slide shelf supports up and into the channels on the sides of the cart.
D
To fold the shelves down:
– Lift the shelf up until it clears the channels.
– Fold down and let the shelf slide down and
stop on the spacers.
•Fold both shelves down.
2
Loading...