Page 1
Custom insert hoods
ZVC30 and ZVC36
ZVC48
General features
Patented installation process. Exclusive design allows an easy
and secure connection with the ventilation duct from within
the unit, without any modification to the exterior canopy.
Powerful ventilation. Single- and dual-blower ventilation with
variable-speed fan exhausts air at a rate of 640 and 1200 cubic
feet per minute, making the inserts compatible with highperformance cooking appliances.
Control with remote-mount option. At the time of installation,
the control can be detached from the insert for mounting on a
wall, countertop or other location. When positioned onboard,
the panel is angled downward to allow easy adjustment of
ventilation and light settings.
Complete with blower, liner and filters. No additional
components or accessory kits required.
Halogen lighting. Four levels of clean, brilliant illumination suit
any cooking task.
Removable filters. Stainless steel mesh filters fit securely and
lift out easily for safe cleaning in the dishwasher.
monogram.com
Chimney hoodsProfessional hoods
48" and 42" custom hood inserts
ZVC48LSS
ZVC42LSS
Overall dimensions
(WxD in inches): 39-1/2" x 14"
Amps @ 120VAC 10.34
Approx. shipping wt. (lbs.) 120
• Dual blowers
• 8" round exhaust duct
• Snap-in blower assembly
• May be mounted onto a wall
or in an island custom canopy
Custom hood insertsTelescopic
36" and 30" custom hood inserts
ZVC36LSS
ZVC30LSS
Overall dimensions
(WxD in inches): 27-1/2" x 14"
Amps @ 120VAC 5.33
Approx. shipping wt. (lbs.) 69
downdraft vents
• 8" round exhaust duct
• Snap-in blower assembly
• May be mounted onto a wall
or in an island custom canopy
63
Page 2
Advance planning for custom hood inserts
ZVC30 and ZVC36
27-1/2"
ZVC48
3-11/16"
ZVC30 and ZVC36
ZVC48
These hood inserts are designed for easy installation into a
variety of custom hood applications. The hood attaches directly
to the house ducting from within the unit
.
• The custom canopy must be constructed to house the
insert sleeve.
• The sleeve has locking clips on the bottom edge to hold
it in place. The opening must be constructed of 3/4"-thick
material to allow the locking clips to engage.
• The opening must be sized accurately to accept the insert
sleeve and the supplied or custom liner.
• Always maintain the 1/2" dimension at the rear to ensure
correct alignment of the ductwork.
• If you are not using the supplied liner you may construct a
custom non-combustible liner. The custom liner must be
constructed to the dimensions shown to fit the insert sleeve.
• These hood inserts must use 8" round duct with a maximum
equivalent length of 100 feet for any duct configuration.
Refer to the duct fittings chart in the installation instructions.
Refer to the installation instructions for details.
Product dimensions and clearances
Models ZVC36 and ZVC30
The supplied liner
A B
width width
ZVC30LSS 1-1/4" 28-1/2"
ZVC36LSS 4-1/4" 34-1/2"
ZVC42LSS 7/8" 40-1/2"
ZVC48LSS 3-7/8" 46-1/2"
Custom cabinet opening
*Opening
width depth
ZVC30LSS 26" 13-3/16"
ZVC36LSS 26" 13-3/16"
3/4"-thick material
Custom insert liner
ZVC42LSS 38-3/4" 13-3/16"
ZVC48LSS 38-3/4" 13-3/16"
Use the same opening cabinet dimensions to construct a custom
liner. 3/4"-thick material must surround the opening. The 1/2"
dimension at the rear is necessary to ensure duct alignment.
Models ZVC48 and ZVC42
39-1/2"
7/8"
NOTE: Bottom edge of insert sleeve
The bottom edge of the insert sleeve has a 7/8"-wide flange on the
sides and 1/2"-wide flange on the front and back.
Remote location for the control
The control panel may be removed from the hood and installed
into a wall or countertop. A 30-ft. length of wire is supplied to
64
accommodate most installations. A blanking plate covers the
opening when the controls are removed.
The overall size of the control panel is 4-1/4" wide and 2-1/4" deep.
25-3/4"
16-3/4"
14"
29-1/2"
14"
1/2"
13"
1/2"
1/2"
38-1/2"
NOTE: 1/2" flange surrounds
outside edge of insert sleeve.
14"
14"
1/2"
13"
1/2"
Note: 1/2" flange surrounds outside edge of insert sleeve.
1-11/16"
Control Cutout
We recommend that the cutout in granite or other hard surfaces
be made before the countertop is installed.
Page 3
Pairing hoods with cooking equipment
Monogram® hoods are designed to perfectly coordinate with Monogram ranges and cooktops. To learn which cooking products can
be combined with the hood you have selected, refer to the charts below.
Wall-mounted Island Downdraft
Installation
combinations
Style
Width
High speed
blower rating
Sones
working speed
Recirculating
option
Vented duct
cover options
Duct size
Equivalent
duct length
ZV755SPSS
ZV750SPSS ZV800SJSS ZV830SMSS ZV900SLSS ZV950SDSS
All non-pro
cooktops
Chimney
36" 36" 30" 36" 36" 36" 42" 36" 36"/ 30"
490 CFM
350 CFM 460 CFM 420 CFM 490 CFM 690 CFM
10.0, 6.0
210/2.0,
170/1.1
8'–10' 8" options 8'–10' options 8'–12' options 8'–10' 5" options No 8'–10' 4" options No 8'–10' 1" options No
8' to 9' 2" duct
cover included;
9" to 10' 3" duct
cover optional
6" round 6" round 8" round 8" round 8" round 6" round 8" round 8" round 3-1/4" x 10" rect.
100' 100' 100' 100' 100 ' 100' 100' 100' 100'
All non-pro
cooktops
Chimney
(slide-out) Chimney Chimney Chimney Chimney Chimney Chimney
7.0
220/2.0
8' to 10' duct
cover included;
or undercabinet
option
All 30" non-pro
cooktops
9.0
190/2.0
7'11" to 10' duct
cover included;
10' to 12' duc t
cover optional
All non-pro
cooktops
8.0
230/2.0
8' to 9' 5" duc t
cover included;
9' 6" to 10' 5" duct
cover optional
All 30" and 36"
cooktops and
ranges
6.0
330/1.3
8', 9' or 10' duct
cover included;
10' to 14' duct
cover optional
ZV855SPSS
ZV850SPSS ZV1050SFSS ZV925SLSS
All non-pro
cooktops
490 CFM
350 CFM 1040 CFM 490 CFM
10.0, 6.0
210/2.0,
170/1.1
8' to 8' 7" duct
cover included;
9' to 10' 1" duct
cover optional
All 30" and 36"
cooktops and
ranges
10.0
450/2.5
8'1" duct cover
included, 8'2 "
or 10' duct
cover optional
All non-pro
cooktops
8.0
230/2.0
8' to 9' duct
cover included;
9' 1" to 10' 1" duct
cover optional
ZVB36STSS
ZVB30STSS
All non-pro
cooktops
Telescopic
downdraft
390 CFM
10.5
170/2.5
Indoor remote
blower option
Professional wall-mounted Professional island Wall or island hood inser ts
ZV48TSFSS
ZV36TSFSS
Installation
combinations
Style
Width
Blower rating
Sones
working speed
Recirculating
option
Vented duct
cover options
Duct size
Equivalent
duct length
42
Note: Cooktop or range not to exceed vent hood width
ZV30TSFSS
All Monogram
cooktops and
ranges
Tapere d Straight Restaurant
48"/36"/30" 48"/36"/30" 48 "/36"/30" 30" 42" 54" 36"/30" 48 "/42"
1090/620/620
CFM
13.0, 9.0
430/2.5
240/1.1
No No No Yes No No No No
Optional 6" and
12" duct covers;
stackable
10" round 10" round 10" round 8" round 10" round 10" round 8" round 8" round
150' 150' 150' 100' 150' 150' 100' 100'
ZV48SSFSS
ZV36SSFSS
ZV30SSFSS
All Monogram
cooktops and
ranges
1090/620/620
CFM
13.0, 9.0
430/2.5
240/1.1
Optional 6" and
12" duct covers,
standard or
full-width;
stackable
ZV48RSFSS
ZV36RSFSS
ZV30RSFSS ZV30HSRSS ZV42ISHSS ZV54ISHSS
All Monogram
cooktops and
ranges
1090/620/620
CFM 530 CFM 1090 CFM 1090 CFM 640 CFM 114 0 CFM
13.0, 9.0
430/2.5
240/1.1
Optional 6" and
12" duct covers,
standard or
full-width;
stackable
All Monogram
30" cooktops
and ranges
Wall-mounted/
undercabinet Tape red Ta pere d Insert Insert
9.0
240/2.0
3-1/2 risers with
and without
louvers included
All 30" and 36"
cooktops
13.0
430/2.5
7'11" to 8'5" duct
cover included,
8'6" to 10'4" duct
cover optional
All Monogram
cooktops and
ranges
13.0
430/2.5
7'11" to 8'5" duct
cover included,
8'6" to 10'4" duct
cover optional N/A N/A
ZVC36LSS
ZVC30LSS
All 30" and 36"
cooktops and
ranges
14.0
250/3.5
ZVC48LSS
ZVC42LSS
All Monogram
cooktops and
ranges
16.5
490/4.0
Page 4
The Home Ventilating Institute (HVI) is a third-party certification
organization focused on providing a fair and credible method
of comparing ventilation performance of similar products.
Many agencies such as ENERGY STAR
®
and ASHRAE utilize
HVI certification for performance assurance. All Monogram
ventilation products are certified by HVI.
Some key performance criteria measured by HVI are sound
level measured in sones, high speed and working speed
measured in cubic feet per minute (cfm).
A sone is an internationally recognized measurement of sound
output. Sones translate decibel ratings into numbers that
correspond to the way people sense loudness. The lower the
sone number the quieter the sound.
Working speed is defined as the speed that produces
100 cfm, or the lowest speed above 100 cfm that a hood
can produce, when working on the same duct system as the
maximum speed.
(HVI916, March 1, 2009) (http://hvi.org/faqs.html)
monogram.com
Chimney hoods
Professional hoodsCustom hood insertsTelescopic
downdraft vents
43
Loading...