GE ZV850SPSS User Manual

Chimney hoods—islands

Monogram

General features

Attractive design. Expertly crafted with uncompromising

attention to detail, a Monogram hood adds a striking architectural highlight to your kitchen.

Powerful ventilation. The variable-speed fan blower provides the power necessary to capture the smoke and fumes produced by high-performance cooking equipment.

Halogen lighting. Six levels of intensity are offered for different needs, from accent to ambient settings.

Removable filters. Filters can be easily detached from the hood for safe cleaning in your dishwasher.

Recirculating options. An optional vent hood kit for recirculating operation can be installed on the ZV850. Model ZV925 is designed to be vented outdoors or to recirculate into the room air.

For additional details on product installation, warranty coverage, care and maintenance, visit monogram.com.

monogram.com

Chimney hoods

36" island vent hood

ZV850SPSS/ZV855SPSS

Overall dimensions (WxHxD in inches): 35-3/8 x 8-1/4 x 27-1/2

Amps @ 120VAC 2.7 Approx. shipping wt. (lbs.) 81

• 6" round exhaust duct

• Required duct covers must be

ordered separately

• Reversible duct cover for vented

or recirculating installation

36" island glass canopy vent hood

ZV925SLSS

Overall dimensions (WxHxD in inches): 35-7/8 x 3-3/4 x 27-9/16

Amps @ 120VAC 4.6 Approx. shipping wt. (lbs.) 146

Professional hoodsCustom hood insertsTelescopic

• 8" round exhaust duct

• 8'–9' duct cover included

• Optional extension duct

covers available

• Reversible duct cover for

vented or recirculating installation

42" island vent hood

ZV1050SFSS

Overall dimensions (WxHxD in inches): 42 x 10 x 31-1/2

Amps @ 120VAC 6.7 Approx. shipping wt. (lbs.) 150

• Dual blowers

• 8" round exhaust duct

• 8' ceiling duct cover

included

• Optional extension duct covers available

downdraft vents

Advance planning for chimney hoods—island

Stainless steel island hoods

Chimney vent hoods are available in 42" and 36" widths.

• Duct cover accessories to meet ceiling heights are required

for the ZV850 island hood. One accessory must be ordered with the vent hood.

• The ZV925, ZV850 and ZV855 vent hoods are supplied with a

two-piece decorative duct cover to reach an 8' to 9' ceiling. An optional duct cover accessory is available for 9'1" to 10'1" ceiling heights.

• The ZV1050 hood is supplied with a duct cover for an 8'

ceiling height (7'11" to 8'1"). Optional duct cover accessories are available for 9' and 10' ceiling heights.

• The installation height must be determined in advance for

island chimney hood models.

• All duct cover accessories must be ordered with the vent

hood and be on-site at the time of installation.

• Review the following chart to determine the appropriate

accessory duct cover.

Required duct cover accessories for vented installations

Ceiling height ZV850/ZV855 ZV925 ZV1050

8' Included Included Included Up to 9' Included Included ZX1059SFSS Up to 10' ZV8510SPSS ZX92510 ZX10510SFSS

Structural support

These vent hoods are heavy. Adequate structural support must be provided. Hoods must be secured to cross-framing positioned between ceiling joists.

• The vent hood and duct cover(s) must be on-site before final

framing and wall finishing. This will help to accurately locate the ductwork and electrical service.

• Final installation will be much easier if the hood is installed

before the range or cooktop below.

• Mounting templates are provided with the installation

instructions to help accurately position the hood on the ceiling above the cooking surface.

Electrical requirements

These vent hoods must be supplied with 120V, 60Hz, and connected to an individual, properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time-delay fuse.

• The junction box is located on top of the hood. Route the

wiring as close to the installation as possible through the ceiling. Refer to the installation instructions for details.

Ductwork for ZV850/855SPSS

This vent hood must use 6" round duct.

• Plan the shortest and straightest route for venting exhaust

to the outdoors.

• Use metal ductwork only.

• For satisfactory performance, duct run should not exceed

100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

• Install a wall cap or roof cap with damper at the exterior

opening. Order the wall or roof cap and any transition needed in advance.

Ductwork for ZV925SLSS

This vent hood must use 8" round duct.

• Plan the shortest and straightest route for venting exhaust

to the outdoors.

• Use metal ductwork only.

• For satisfactory performance, duct run should not exceed

100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

Ductwork for ZV1050SFSS

This vent hood must use 8" round duct.

• Plan the shortest and straightest route for venting exhaust

to the outdoors.

• Use metal ductwork only.

• For satisfactory performance, duct run should not exceed

100 feet equivalent length for any duct configuration. Refer to the duct fittings chart in the installation instructions.

• Install a wall cap or roof cap with damper at the exterior

opening. Order the wall or roof cap and any transition needed in advance.

Recirculating installation

The ZV850/855 hood is designed to be vented to the outside, but it can easily be converted for recirculating operation.

Recirculating kits are included for the ZV850/855 hood. These kits include charcoal filters, a support frame with air deflector and a vented decorative duct cover to complete the installation. Kits are sized for ceiling height.

The ZV925SLSS is designed for either vented or recirculating operation. All necessary parts are included.

The ZV1050 is not convertible to recirculating operation.

Advance planning for chimney hoods—island

*Height

to Ceiling

8-1/4"

35-3/8" (excluding utensil rods) 36-1/2" (including utensil rods)

27-1/2"

24" to 30"

36" Min.

9-7/16"

monogram.com

Product dimensions and clearances

This stainless steel hood can be installed over any Monogram® cooktop except Professional models. Accessories to meet

correct ceiling heights are required.

Model ZV850/855SPSS

* 50-1/8" for 10' ceiling using

ZX8510SPSS accessory

This vent hood must be installed 24" minimum to 30" maximum above the cooking surface; 25-1/2" is recommended to that the duct cover meets the ceiling. The cooking

surface

should be at least 36" above the floor.

A mounting template is provided with the installation instructions to help position the hood above the cooking surface and to locate the mounting brackets.

Charcoal filter replacements are available from your dealer or by calling 800.626.2002. Order catalog number WB02X10731.

ensure

Using duct cover accessories

A duct cover accessory is required for all ceiling heights.

Use this chart to determine the correct duct cover accessory for 8' to 10' ceilings that must be ordered with the hood.

ZV850/ZV855 installation heights

Ceiling height

7' 11" 24" 24" 8' 0" 24" to 25" 24" to 25" 8' 1" 24" to 26" 24" to 26" 8' 2" 24" to 27" 24" to 27" 8' 3" 24" to 28" 24" to 28" 8' 4" 27" to 29" 24" to 29" 8' 5" 28" to 30" 24" to 30" 8' 6" 29" to 30" 25" to 30" 8' 7" 30" 26" to 30" 8' 8" 27" to 30" 8' 9" 28" to 30" 8' 10" 29" to 30" 8' 11" 30" 8' 7" 24" 24" 8' 8" 24" to 25" 24" to 25" 8' 9" 24" to 26" 24" to 26" 8' 10" 24" to 27" 24" to 27" 8' 11" 24" to 28" 24" to 28" 9' 0" 24" to 29" 24" to 29" 9' 1" 24" to 30" 24" to 30" 9' 2" 24" to 30" 24" to 30" 9' 3" 24" to 30" 24" to 30" 9' 4" 24" to 30" 24" to 30" 9' 5" 24" to 30" 24" to 30" 9' 6" 24" to 30" 24" to 30" 9' 7" 24" to 30" 24" to 30" 9' 8" 25" to 30" 24" to 30" 9' 9" 26" to 30" 24" to 30" 9' 10" 27" to 30" 25" to 30" 9' 11" 28" to 30" 25" to 30" 10' 0" 29" to 30" 26" to 30" 10' 1" 30" 27" to 30" 10' 2" 28" to 30" 10' 3" 29" to 30" 10' 4" 30"

*Based on 36" countertop height.

Possible vented installation height*

Possible recirculating installation height

Lower fra me 20-3/4"

Lower duc t 18"

Upper duc t 18"

Upper fra me 31"

Supplied lower frame

Supplied duct covers

Supplied frame

ZX8510SPSS – accessory upper frame

Duct Cover Dimensions ZX8510SPSS Duct Cover

Accessory

This accessory is available for installation with ceiling heights above 8'7" to 10' and higher.

20-3/4"

15-3/4"

20-3/4"

Supplied duct cover

This accessory consists of two 26-1/4" duct covers and a 31" upper support frame piece.

Chimney hoods

Lower duc t 26-1/4"

Upper duc t 26-1/4"

Professional hoodsCustom hood insertsTelescopic

ZX8510SPSS – accessory duct covers

downdraft vents

The serial plate is located behind the removable filters.

+ 4 hidden pages