GE ZDT800SSFSS User Manual
OVERALL DIMENSIONS
ZDT800SSFSS
ZDT800SSFSSGE Monogram® 24" Fully Integrated Dishwasher
SPECIFICATIONS
Overall Width 23 3/4" (60.3 cm)
Overall Height 33 3/8" (84.8 cm) Min
34 5/8" (88.0 cm) Max
Overall Depth 24" (61 cm)
Door Clearance 25 1/2" (64.8 cm)
Overall Dishwasher Capacity 16 Place Settings
Minimum Cabinet Width 24" (61 cm)
Minimum Cabinet Depth 24" (61 cm)
Cutout Width 24" (61 cm)
Cutout Height 33 1/2" (85.1 cm) Min
34 3/4" (88.3 cm) Max
Electrical Requirements 9.0 A
Hose Length No more than
12' (3.7 m)
Voltz/Hertz/Amps 115 V, 60 Hz,
15 or 20 amp circuit
Shipping Weight 139 lb (63 kg)
33 3/8" min
34 5/8" max
(84.8 - 88.0)
2" (5.1)
1 11/16" (4.3)
30"
(76.2)
3 1/2"
(8.9)
23 3/4" (60.3) 2" (5.1)
FRONT VIEW
24" (61.0)
33 3/8" min
34 5/8" max
Height at rear
SIDE VIEW
23 3/4" (60.3)
3 3/8" min
4 5/8" max
(8.6 - 11.8)
Toe kick
height
(84.8 - 88.0)
Dimensions in parentheses
are in centimeters unless
otherwise noted.
2" (5.1)
min
clearance
to wall
TOP VIEW
OPEN DISHWASHER DOOR
SHOWING DOOR CLEARANCE
Product Specification Created 3/14
25 1/2"
(64.8)
2" (5.1)
min
clearance
to wall
ZDT870SSFSS & ZDT800SSFSS
GE Monogram® 24" Fully Integrated Dishwasher
ZDT800SSFSS
INSTALLATION
33 1/2"
(85.1) min
underside of
counter to floor
34 3/4"
max
(88.3)
FLUSH CUTOUT INSTALLATION
24" (60.1)
min cutout depth
4"(10.2)
B
6"
(15.2)
ELECTRIC/
WATER
NOTES
A
The dishwasher drain
hose must be no more
than 12 feet in length
for proper drainage.
B
Electrical connections
are at the right front
of the dishwasher and
water connections are
on the left. The hot
water line should extend
forward 30" to 40"
from the rear wall. The
electrical must extend
forward at least 24" to
reach the junction box.
C
To prevent siphoning,
an air gap or high drain
loop must be used.
24 " (60.1) Min
cutout width
B
6" (15.2)
ELECTRIC/
WATER
INSTALLATION CUTOUT FRONT VIEW
Product Specification Created 3/14
Loading...