GE ZDP364NRPSS User Manual

36" Professional ranges
BACK FRONT GRIDDLE BACK FRONT
TIMER
PUSH TO SELECT
O
F
F
B
R
O
I
L
P
R
O
O
F
C
L
E
A
N
R
O
A
S
T
B
R
O
I
L
B
A
K
E
C
O
N
V
.
C
O
N
V
.
C
O
N
V
.
General features Authentic professional appearance.
smoothly finished edges, large electronic control knobs and heavy-duty handles.
Sealed, dual-flame stacked burners. Provide complete
Monogram® Professional Reverse-Air convection oven.
Provides superb baking results, with fast preheating.
Heavy-duty, full-extension racks. Glide smoothly in and out on
stainless steel ball bearings for easy access, and are designed to remain in the oven during the self-clean cycle.
LED task lights. Positioned below the bullnose, these lights
provide a functional and theatrical touch.
Stainless steel and aluminum-clad griddle. Offers 18,000
BTUs* of cooking power, allowing fast and consistent heating across the entire cooking surface.
Ceramic-infrared grill. 15,000 BTUs* of adjustable heat, the
cooking grate is grooved on one side to create sear marks and rounded on the other for delicate foods.
Electronic ignition with automatic reignition. Ensures a
continuous flame and reignites automatically if accidentally extinguished.
Reversible burner grates. These grates are flat on one
side and uniquely contoured on the other to accommodate round-bottom woks.
Caterer’s oven. Available in 48" and 36" models; uniquely sized
to accommodate three full-size sheet trays.
For additional details on product installation, warranty coverage, care and maintenance, visit monogram.com.
*Natural gas
Stainless steel with
36" professional range
Dual-fuel: ZDP366NPSS, ZDP364NRPSS, ZDP364NDPSS All-gas: ZGP364NRRSS, ZGP364NDRSS and ZGP366NRSS (natural gas)
Dual-fuel: ZDP366LPSS, ZDP364LRPSS and ZDP364LDPSS, All-gas: ZGP364LRRSS, ZGP364LDRSS and ZGP366LRSS (liquid propane)
Overall dimensions (WxHxD in inches): 35-7/8 x 35-1/4–36 -3/4 x 28-1/4
Amps @240VAC 27.0 208VAC 24.0 KW Rating
@240VAC 6.6 208VAC 4.9 Approx. shipping wt. (lbs.) 475
Professional ranges offer a combination
of burners, grill and griddle on cooktop
Dual-fuel or all-gas range must be
specified by model number
Natural or LP gas must be specified by
model number
Optional 12" or 30"–36" adjustable-height
backsplash accessories
All burner grates are reversible to support
a round-bottom wok
Advance planning for 36" dual-fuel Professional ranges
All Professional ranges offer a number of choices in size and cooktop configurations.
The ranges are factory set for natural gas or liquid propane. Be sure to order the correct model for the installation situation. If the wrong fuel type is ordered, the range may be converted. Conversion orifices are packed with each product.
WB28K10553 high-altitude kit is available for operation above 6,000 feet. This kit includes orifices for both LP and natural gas operation.
All conversion kits must be installed by a qualified service technician at an additional cost.
8
Locate gas and electrical as shown.
Electrical requirements
Ranges must be supplied with 208/240V, 60Hz, and connected to an individual, properly grounded branch circuit protected by a circuit breaker or time-delay fuse. Install a 30-amp circuit for 36" ranges. The receptacle must be a NEMA 14-50R device to accept the four-prong plug on the range.
Gas supply
• Natural gas models are designed to operate at 5" water column
pressure. For proper operation, the pressure of the natural gas supplied to the regulator must be between 7" and 13" water column.
• The liquid propane models are designed to operate at 10" water
column pressure. For proper operation, the pressure of the LP source to the regulator must be between 11" and 13" water column.
Advance planning for 36" dual-fuel Professional ranges
28-7/8” to Front
monogram.com
36" range cooktop configurations
The 36" Professional dual-fuel ranges offer a combination of grill, griddle and burners on top, and a large self-clean, electric European Reverse-Air convection and six-element heating system oven.
ZDP364NDPSS with 4 burners and griddle (Order ZDP364LDPSS for LP gas)
ZDP364NRPSS with 4 burners and grill (Order ZDP364LRPSS for LP gas)
ZDP366NPSS with 6 burners (Order ZDP366LPSS for LP gas)
Backsplash accessories
The range requires a 12" minimum clearance to a vertical combustible surface at the rear. A backsplash is required for installations with less than 12" clearance. The following backsplash accessories are available, or a custom, non-combustible backsplash can be used.
Order ZX12B36PSS, 12" backsplash Order ZXADJB36PSS, 30"–36" adjustable-height backsplash with warming shelf
Side view with a backsplash
Optional Backsplash Accessories
13/16”
30-36”
35-1/4”
to
36-3/4”
10-1/2”
12”
1-1/2”
Edge
3-3/16”
Control Panel
Depth
28-1/4” to
Beveled
Edge of Control
Panel Bullnose
27-1/2” to
Beveled Edge
- Maximum Adjacent
Cabinet Depth
for
Flush
Installation
7” Control
Panel Height
36" professional ranges 48" professional ranges
Product dimensions and clearances
A 36" or wider HVI certified vent hood with 600 CFM minimum is recommended. Models with a grill require a vent hood.
The serial and model numbers are located behind the far left knob for convenience. The full rating label is located on the bottom of the control panel—visible when the oven door is open.
28-1/4”
to Front of
31-1/16”
Door
to Front of
Handle
48-1/4”
with Oven Door
Open
Additional clearances
Installations without a hood require 48" minimum to combustibles. A custom hood installation with exposed horizontal combustible surfaces must have an “auto-on” feature. See hood installation instructions for specific hood clearances.
The surface of the entire back wall above the range and below the hood must be covered with a non-combustible material such as metal, ceramic tile, brick or stone.
30" professional ranges
9
Loading...