ZCGS150PSS - GE Monogram Stainless Steel 15" Built-In Compactor
Dimensions and Installation Information (in inches)
This compactor is designed as a built-in appliance
only. It may be located in any convenient space
under a countertop.
DO NOT OPERATE FREE-STANDING because the compactor
will tip over when the drawer is pulled out.
Additional Specifications: A 115 Volt, 60 Hz. power supply
is required. An individual properly grounded branch circuit
protected by a 15- or 20-amp circuit breaker or time delay
fuse is recommended. Install a properly grounded 3-prong
electrical receptacle recessed into the back wall. Electrical
outlet location is critical for proper cord storage when
compactor is installed.
If the compactor is to be located in or near a corner of base
cabinets, allow 6” minimum clearance from the corner for
bag removal from the right side.
Front View (not to scale)
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 9/08
Listed by
Underwriters
Laboratories
160010
ZCGS150PSS - GE Monogram Stainless Steel 15" Built-In Compactor
Features and Benefits
• Hidden Controls - The controls are hidden behind the
compactor door, lending a beautiful designer appearance
• Stainless Door with Tubular Handle - Sophisticated
styling with a stainless steel door and handle designed to
coordinate beautifully with other Monogram appliances
• Built-In Only - The compactor is built-in to adjacent
cabinetry for an upscale appearance
• 1.4 Cu. Ft. Capacity - Provides plenty of room for waste
items or recyclables
• 1/3 HP Motor - Powerful motor provides heavy-duty
compacting power
• Charcoal filter, fan and air freshener - help manage odor
• Toe Pedal Opener - Hands-free toe pedal drawer makes it
easy to open and load
• Removable Drawer - Makes it simple to empty and clean
• Side Release Bin - Allows ease of emptying
• Model ZCGS150PSS – Stainless steel
Specification Created 9/08
160010