GE ZBD6890K15II, ZBD6890K01II, ZBD6880K15SS, ZBD6880K03SS, ZBD6880K00SS Owner’s Manual

...
Dishwasher
ZBD6800 ZBD6880 ZBD6890
ZBD0700 ZBD0710
monogram.com
[
Consumer Information
Dishwasher
Introduction
Contents
Your new Honogram dishwasher makes an eloquent statement of style, convenience and kitchen
blend of form and function will delight you for gears to come.
The information on the following pages will help you operate and maintain your dishwasher properly.
If you have any other questions, visit our Website at: monogram.corn
Appliance Registration ................ 3, 23,24
Care and Cleaning ......................... 15
Consumer Services ...................... 3, 20
Hodel and Serial Number Location ........... 3
Operating Instructions ................... 6-14
Control Paneland Operation ............ 6-8
Lighting Features ......................... 9
Water Temperature ...................... 9
Rinse Agent .............................. 9
Dish Preparation Prior to Loading ......... 10
Detergents ............................. 10
Dishwasher Racks ................... 11-14
Problem Solver ......................... 16-19
Safety Instructions ........................ 4, 5
U.S.A.Warranty ........................... 21
Canada Warranty ......................... 22
Consumer Information
Dishwasher
Before using
your
dishwasher
Write
down the
model &
serial
numbers
Read this manual carefully. It is intended to help you operate and maintain your new dishwasher properly.
Keep it handy for answers to your questions.
You can locate your model and serial numbers
on the tub wall just inside the doon
If you don't understand something or need more help, there is a list of toll-free consumer service
numbers included on the Consumer Services page inthe back section of this manual.
OR
Visit our Website at: monogram.cam
Before sending in the card, please write these
numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or
service calls concerning your dishwasher.
If you received Immediately contact the dealer (or builder) that
a damaged sold you the dishwasher.
dishwasher
Save time & money
If btou need service
Before you request service, check the Problem
Solver in the back of this manual.
To obtain service, see the Consumer Services
page in the back of this manual.
We're proud of our service and want you to be
pleased. If for some reason you are not happy with the service you receive, here are steps to follow for further help.
For customers in the USA:
FIRST,contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT,if you are still not pleased, contact us on
our website, write all the details-including your
phone number-or write to:
It lists causes of minor operating problems that you can correct yourself.
For customers in Canada:
FIRST,contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem. NEXT,if you are still not pleased, write all the
details-including your phone number-to:
Manager, Consumer Relations Mabe Canada Inc.
1 Factory Lane, Suite BlO
Moncton, N.B.EIC 9M3
Manager, Customer Relations GEAppliances Appliance Park
Louisville, KY40225
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
ik WARNING!
For gour safetg, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, and to prevent propertg damage, personal injurg, or death.
II, WARNING! WATER HEATER SAFETY
Under certain conditions, hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE,
If the hot water hasnot been used for two weeksor more, preventthe possibility of damage or injury by turning on all hot water faucets and allow them to
run for severalminutes. Dothis before using any electrical appliance which isconnected to the hot water system.Thissimple procedure will allow any
built-up hydrogen gas to escape.Sincethe gas is flammable, do not smokeor usean openflame or appliance during this process.
,PROPER INSTALLATION AND MAINTENANCE
This dishwasher must be properly installed and located in accordance with the Insto!!ation Instructions before it is used. !f you did not receive on Insto!!otion Instructions sheet with gout dishwasher, you can receive one bg visiting our website at monogram.com.
Connectto a grounded metal, permanent wiring system; or run anequipment-grounding conductor
with the circuit conductors and connect to the equipment-grounding terminal or leadof the
appliance.
Improper connection of the equipment-grounding conductor can resultin a riskof electric shock.
Checkwith a qualified electrician or service representative if you arein doubt whether the appliance is properly grounded,
Disposeof discardedappliances and shipping or packingmaterial properly.
Do not attempt to repairor replaceany part of your dishwasher unless it isspecifically recommended in this manual. All other servicing
should be referred to a qualified technician.
Tominimizethe possibilityof electric shock, disconnect thisappliance from the power supply
before attempting any maintenance.
NOTE:Turningthe dishwasher off doesnot disconnectthe appliance from the power supply,
Werecommend having a qualified technician serviceyour appliance.
CAUTION:
To prevent minor injury or property damage
Contents washed in Anti-bacterial mode, if available, may be hot to the touch. Use care before handling.
Using adetergent that is not specifically designed
for dishwashers will cause the dishwasher to fill with suds.
If your dishwasher is connected to a wall switch, ensure that the switch is on prior to use.
Ondishwashers with electronic controls, if you chooseto turn the wall switch off between wash cycles,allow 5-10 secondsafter turning the switch on before touching START/RESETto allow
the control to initialize.
Non-DishwareItems: Do not wash items such aselectronic aircleaner filters,furnace filters and
paint brushes in your dishwashen Damage to dishwasherand discoloration or staining of dishwasher may result.
Closesupervision isnecessary if thisappliance isusedby or near children.
Load light, plastic items so they will not become dislodged and drop to the bottom of the dishwasher-they might come into contact with the heating element and be damaged.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
WARNING! RISK OF CHILD ENTRAPMENT
PROPER DISPOSAL OF THE DISHWASHER
Junked or abandoned dishwashers are dangerous_.even if theg will sit for "just a
few days." If you are getting rid of your old dishwasher, please follow the instructions below
to help prevent accidents.
Before You Throw Away Your Old Dishwasher:
Take off the door of the washing compartment or remove the door latch keeper (as shown).
Door
keeper
WARNING!
Usethis appliance only for its intended purpose
as described inthis Owner's Manual.
Use only powder,tabs, liquid detergents or rinse
agents recommended for use in a dishwasher and keepthem out of the reach of children.Cascade¢,
Cascade ®Complete and Electrasol ®Automatic Dishwashing Detergents, and Jet-Dry ®and Cascade Crystal Clear _ rinse agents have been
approved for use in all GEdishwashers,
Locate sharp items so that theg are not likely to damage the door seal.
Load sharp knives with the handles up to reduce the riskof cut-tgpe injuries.
Do not wash plastic items unless marked dishwasher safe or the equivalent. For plastic
items not so marked, check the manufacturer's recommendations,
Do not touch the heating element during or immediately after use.
When using your dishwasher, follow basic precautions, including the following:
Donot operate your dishwasher unlessall enclosure panelsare properly inplace.
Donot tamper with controls.
Donot abuse,sit on or stand on the door or dish
rack ofthe dishwashec
Do not allow children to play around dishwasher when opening or closing door due to the possibility of small fingers being pinched in dooc
Do not discard a dishwasher without first removing the door or the door latch keeper of the washing compartment.
Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Do not allow children to play with, on or inside this appliance or any discarded appliance.
READANDFOLLOWTHISSAFETYINFORMATIONCAREFULLY.
SAVETHESEINSTRUCTIONS
Control Panel
Dishwasher
You can locate
_lour model number on the
tub wall just inside the door.
Throughout this manual, features and
appearance may vary from
£our model.
Control
Settings
ZBD6800 end ZBD6880
ZBD0710
I WASH CYCLES
ZBD6890 and ZBD0700
TIMEREMAININ_ NII_tAL G_$][$
% D
[] WashCycles
ANTI BACTERIAL
71
ANT gA_ERIAL CHINA CRY_AL
COOl(WARE RINSEON_
NORMAL
ANTI-BACTErIAL e CHINACRYSTAL
ee COOKWARE RINSE ONLY
NORMAL
WASHC_L_
N
[]
sl,,,® .........®
D I]] I-qi-a % 12]
DELAY PRE HF_TE SANITIZED @
DRY r_ s_c e CLEAN
%1qi71%% [] iTI
e I)RYING S_-ART
m
ANTI-BACTERIAL SPEEDCYCLE pLASTIcs CYCLE COOk'WAR_ CHINACI_YSTAL P,INSEONLY
WASHCYCtES
_ 0 C WASHING CLEAN
DD%DD % F1
Usethearrow pads ,7to scrollthrough the wash cycles.Thelight above or next to the
selected pad will beONto indicate which WASHCYCLEhas been selected.
NOTE:Thisdishwasher isequipped with an ExtraCleanTM Sensorwith automatic temperature
control; therefore,cycle time and total water consumption may vary depending on soil(heavy,
medium, light) and temperature conditions.
Heavy 9.1gallons, 95 minutes Medium 7.8 gallons, 95 minutes
Light 6.5gallons, 90 minutes
This cycle raisesthe water temperature in the final rinseto sonitizegout dishwore. The cgcle length will vorg depending on the temperature of your inlet waten
NOTE:TheAnti-Bacteriol cycle ismonitored for sanitizotion requirements. Ifthe %cle is interrupted during orafter the moin wosh portion or if the incoming water temperature isso lowthat adequate
woter heating cannot be achieved, the sonitizing conditions mog not bemet. Inthese coses,the sonitized light willnot illuminate ot the end of the cycle.
z_
NSF INTERNATIONAL
COOKWARE
NORMAL
SPEEDCYCLE (onsomemodels)
Meets NSF Standard 18/4 Sanitization and Cleaning
performance of household sprag-tgpe dishwashers.
NOTE:NSFcertified residential dishwashers are not intended for licensedfood establishments. Heavy 10.4gallons, 80 minutes
Medium 9.1 gallons, 90 minutes Light 7.8gallons, 100minutes
This cycle is meant for heavily soileddishes or cookware with dried-on or baked-on soils.Thiscycle
may not remove burned-on foods. Evergdagdishes are safe to be usedin this cycle. Heavy 8.75gallons, 70 minutes
Medium 6.25 gallons, 60 minutes Light 5 gallons, 55minutes
This cycle isfor medium/heavily soileddishesand glasswore.
7.8gallons,37minutes
Thiscgcleisfor evergdagdishesandglassware.
Control Panel/Operation
Dishwasher
CHINA CRYSTAL
GLASSES Heavy 7.8 gallons, S0 minutes (on some models) This cycle is specifically designed for glosses.
PLASTICS CYCLE
(on some models)
RINSE ONLY
7.8 gallons, 50 minutes
This cycle is for lightly soiled chino and crystal.
Heavy 7.8 gallons, 70 minutes Medium 6.5 gallons, 60 minutes Light 5.2 gallons, 55 minutes
This cycle is specifically designed to reduce the risk of melting plastic items and
improve plastic drying for dishwasher safe plastic items.
Heavy 2.6 gallons, 10 minutes Light 1.3 gallons, 5 minutes
For rinsing partial loads that will be washed later. Do not use detergent with this cycle.
[] DELAY START--
This option will allow you to delay the start time of any wash cycle for up to 8 or 24 hours (depending on model).
, Select the delay start time you want by pressing the DELAYSTARTpod.
Multiple or continuous pressing will increment the delay hours. Select the number of hours you want to delay the start of the cycle. Then press
START/RESET.
. After closing the door,the machine will count down and automatically start
at the correct time.
NOTE:To cancel the DELAYSTARTselection before the cycle begins, press the DELAYSTARTpad until the display is blank. Pressing START/RESETwill not cancel delay hours.
[_]ADDEDHEAT--
When selected, the cycle will run longer with the heating element on to improve both wash and dry performance.
NOTE: Cannot be selected with RINSE ONLY cycle.
[] PREWASH-
(onsomemodels)
For use with heavily soiled and/or dried-on, baked-on soils.This option MUSTbe selected PRIORto starting the cycle. This option adds 16 minutes to the cycle time.
NOTE: Cannot be selected with RINSE ONLY cycle.
[] HEATED--
DRY
When selected, turns the drying heater and fan on for fast drying. This option will extend the cycle time by 30 minutes for the ANTI-BACTERIALcycle, 38 minutes for the NORMALcycle and COOKWAREcycle, 8 minutes for the SPEEDcycle, 15 minutes for the PLASTICScycle and 30 minutes for all other cycles. When this is NOTselected, the fan will turn on for 4 hours to dry your dishes without added heat-and energy is saved.
NOTE: Cannot be selected with RINSE ONLY cgcle.
[] LOCK &--
You can lock the controls to prevent any selections from being made. Or you con lock the controls after you have started a cycle.
Children cannot accidentallg start the dishwasher bg touching pads with this option selected.
To lock the dishwasher controls, press and hold the HEATEDDRYpad for 3 seconds. The LOCKlight will turn on. To unlock the dishwasher controls, press and hold the HEATEDDRYpad for 3 seconds. The LOCKlight will turn off.
Control Panel/Operation
Dishwasher
[] Status Indicator Lights (indicatorsvary by model)
The Status display tells you what is happening while the dishwasher is in operation. The lights will come ON,indicating the sequence of the dishwasher operation.
SENSING Displayed while the ExtraClean'" Sensor is measuring the amount of soil and
temperature of water. The dishwasher will adjust the selected cycle to achieve
optimal performance. ADD-A-DISH Displayed during prewash, indicating that dishes added now will still be cleaned. WASHING Displayed during prewash, main wash and rinse periods. DRYING Displaged during HEATEDDRY. SANITIZED Displayed when cgcle has met sanitization conditions. CLEAN Displaged when a wash cgcle and enhancements are complete.
[81Time Remaining Displag (on some models)
During operation, the displag shows the minutes remaining until the cgcle is complete. The display may adjust the remaining time while the Sensing light is on. The time displayed at the start of
each cgcle mag change from the factory setting as the unit customizes itself to actual home usage. During a delag start, the display will show hours of time remaining until the cgcle starts.
[] START/RESET
START--
RESET--
[] Clean--
After selecting the cycle and desired enhancements, press the START/RESETpad
one time to ready the dishwasher to begin the cycle. Close the door to start the cycle or begin the DELAYSTARTcountdown. When the cgcle starts, the water fill begins and approximately 60 seconds later the wash action begins.
The dishwasher will always display your last selection and enhancements. If you
don't want to change the settings, simply press the START/RESETpad one time
to ready the dishwasher and close the door to begin the cycle.
NOTE:If the START/RESETlight is flashing, the cgcle has been interrupted. Light will stop flashing after the dishwasher automatically pumps out the water. Close the door to allow the water to pump out (this takes approximately 70 seconds).When the light stops flashing, the dishwasher can be reprogrammed and restarted.
Also, if a power failure occurs, NORMALand HEATEDDRYwill automatically be
programmed. Make any new selections and press the START/RESETpad to begin
the new cycle.
Open the door slowly to prevent splash-out. Pressthe START/RESETpad
to cancel the cgcle. Closethe door.The dishwasher will pump out and turn off
after 70 seconds.
The CLEANlight is illuminated and a double beep will sound when the selected
cycle and enhancements are complete. You may remove the dishes at any
time. Note the high-efficiency fan will run quietly for 30 minutes to 4 hours
(depending on selected cycle) after the CLEANlight is illuminated to continue drying the dishes. This can be stopped by opening the door and pressing any kegpad.
NOTE:To turn off the double beep indicator (or re-activate it if it was previously disengaged}, pressthe HEATEDDRYpad 5 times within 3 seconds. A triple beep
will sound to indicate the end-of-cycle beep option has been toggled.
Loading...
+ 16 hidden pages