GE YVXR1040 User Manual

YVXR1040
Part No. 175D1807P219 Pub. No. 79-9064
Washers
Owner’s Manual
2
Welcome to the RCA family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to-use manual and you’ll hear it in the friendly voices of our customer service department.
Best of all, you’ll experience these values each time you do the laundry. That’s important, because your new washer will be part of your family for many years. And we hope you will be part of ours for a long time to come.
We thank you for buying RCA. We appreciate your purchase, and hope you will continue to rely on us whenever you need quality appliances for your home.
Important!
Staple sales slip or cancelled check here.
Proof of the original purchase date is needed to obtain service under the warranty.
Write the model and serial numbers here.
#
#
You can find them in the upper right corner on the back of your washer.
Congratulations! You Are Now Part Of The RCA Family.
RCA & You, A Service Partnership.
Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer.
Read this Manual
Ask any RCA appliance owner and they will tell you we stand behind our products with unmatched quality service. However, did you know that most questions result from simple problems that you can easily fix yourself in just a few minutes? This Owner’s Manual can tell you how.
You’ll find many answers to common problems here. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Review the Section on Troubleshooting Tips
If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section.
If You Need Service
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Safety Information . . . . . .4–7

Operating Instructions

Control Panel . . . . . . . . . . . . . .8
Control Settings . . . . . . . . . .8, 9
Washer Features . . . . . . .10, 11
Loading and Using
the Washer . . . . . . . . . . . .12, 13

Troubleshooting Tips

Before You
Call For Service . . . . . . . . .14–18

Customer Service

Warranty . . . . . . . . . . . . . . . .19
Service Telephone
Numbers . . . . . . . . . .Back Cover
3

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
4
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.
WATER HEATER SAFETY
WARNING!
5
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by calling us toll-free at the GE Answer Center
®
, 800.626.2000.
PROPER INSTALLATION
Install or store where it will not
be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to
conform with all governing codes and ordinances. Follow details in Installation Instructions.
Keep the area underneath
and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.
Close supervision is necessary
if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance.
YOUR LAUNDRY AREA
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
IMPORTANT SAFETY INSTRUCTIONS. READ ALL INFORMATION BEFORE USING.
6
Use this appliance only for its intended purpose as described in this Owner’s Manual.
Never reach into washer while
it is moving. Wait until the machine has completely stopped before opening the lid.
Do not mix chlorine bleach
with ammonia or acids such as vinegar and/or rust remover. Mixing different chemicals can produce a toxic gas which may cause death.
Do not wash or dry articles
that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.
The laundry process can
reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.
To minimize the possibility
of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
NOTE:
Turning the Cycle Selector knob to an off position does
NOT
disconnect the appliance from the power supply.
Never attempt to operate this
appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
WHEN USING THE WASHER
WARNING!
7
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Turn off water faucets to
relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.
Before discarding a washer,
or removing it from service, remove the washer lid to prevent children from hiding inside.
Do not attempt to repair or
replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user-repair instructions that you understand and have the skills to carry out.
Do not tamper with controls.
WHEN NOT IN USE
REMEMBER…
Your continued health and safety are important to us.
Please read and follow this Safety Information carefully.
We want you to remain a happy and healthy part of our family.
SAVE THESE INSTRUCTIONS
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the washer control panel.
You can locate your model number behind the top edge of the control panel.
8
OFF
perm. press warm wash
load size
SMALL
EXTRA LARGE
warm wash
hot wash
cold wash
OFF
1 2

Control Settings

Load Size
The water level should just cover the clothes. Adjust the load size accordingly. Loosely load clothes no higher than the top row of holes in the washer tub.
Wash Cycle
Select the water temperature for the wash and rinse cycles. Always follow fabric manufacturer’s care label or instructions when laundering. Follow the water temperature guide on washer lid.
The wash cycle controls the length of the washing process. The chart below will help you match the wash cycle setting with your clothing.
REGULAR For heavy to lightly soiled cottons, household linens,
work and play clothes.
PERM PRESS For easy care and wrinkle-resistant items.
1
2
About the washer features.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
9
Do not pour anything into the agitator if the agitator cap or dispenser is removed.
Agitator Cap or Fabric Softener Dispenser (depending on model)
The agitator cap
fits into the top of the agitator. If it
accidentally comes off, simply put it back on.
The fabric softener dispenser
automatically releases liquid
fabric softener at the proper time during the cycle.
To use, follow these steps:
Make sure dispenser is securely attached to agitator.
Use only liquid fabric softener. Pour into dispenser, using amount recommended on package.
Add water to dispenser until it reaches the maximum fill line.
Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.
Never pour fabric softener directly on clothes. It may stain them.
3
2
1
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the washer features.
10
Separate for cleaning.
Cleaning the Fabric Softener Dispenser
Remove the dispenser from the top of the agitator.
Separate the dispenser cup from the cover by grasping the top and pushing down on the inside of the cup with your fingers. Dispenser cup will pop free from the cover.
To clean dispenser, soak both the dispenser cup and the dispenser cover in the following solution:
1 US gallon (3.8 liters) warm water
1/4 cup (60 ml) heavy duty liquid detergent
1 cup (240 ml) bleach
If necessary, loosen build-up with a clean, soft cloth after soaking. Do not use a stiff brush; you may roughen the surface of the dispenser.
Rinse and reassemble dispenser. Place dispenser back on the agitator.
5
4
3
2
1
Loading and using the washer.
Always follow fabric manufacturer’s care label when laundering.
11
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Proper Use of Detergent
Always add detergent before adding clothes so that the detergent can work effectively. Follow the detergent package directions. Using too little detergent is a common cause of laundry problems. Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Loading the Washer
Load dry items loosely, no higher than the top row of holes in the washer tub. When loading wet items make sure you set the load/water level high enough to allow the items to move freely. Water level should just cover the clothes. To add items after washer has started, push in Cycle knob and submerge additional items next to the agitator. Close the lid and pull Cycle knob out to restart.
Do not wrap large items like sheets around the agitator.
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Washer will not start with the lid up.
Sorting Wash Loads
Colors
Whites Lights Darks
Soil
Heavy Normal Light
Fabric
Delicates Easy Care Sturdy Cottons
Lint
Lint Producers Lint Collectors
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Loading and using the washer.
12
Care and Cleaning of the Washer
Wash Basket:
Leave the lid open after washing to allow moisture to evaporate. If you want to clean the basket use a clean soft cloth dampened with liquid detergent, then rinse. (Do not use harsh or gritty cleaners.)
Fill Hoses:
Hoses connecting washer to faucet should be replaced
every 5 years.
Lint Filter:
It is self-cleaning, requires no maintenance, and is located
under the agitator.
Exterior:
Immediately wipe off any spills. Wipe with damp cloth.
Try not to hit surface with sharp objects.
Moving and Storage:
Ask the service technician to remove water from drain pump and hoses. Do not store the washer where it will be exposed to the weather. Call the GE Answer Center
®, 800.626.2000
for information on how to keep the tub stationary when moving the washer.
Long Vacations:
Be sure water supply is shut off at faucets. Drain all
water from hoses if weather will be below freezing.
Before you call for service…
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem Possible Causes What To Do
Washer won’t operate
Washer is unplugged Make sure cord is plugged
securely into a working outlet.
Water supply is turned off Turn both hot and cold
faucets fully on.
Controls are not set Check controls and properly make sure Cycle knob is
pulled out to ONposition.
Lid is open Close lid and pull Cycle
knob out to ONposition.
Circuit breaker/fuse is Check house circuit tripped/blown breakers /fuses. Replace
fuses or reset breaker. Washer should have separate outlet.
Water temperature
Control is not set properly Check water temperature
is incorrect
control and adjust.
Water supply is turned off Turn both hot and cold or improperly connected faucets fully on and make
sure hoses are connected to correct faucets.
Water valve screens are Turn off the water source stopped up and remove the water
connection hoses from the upper back of the washer. Use a brush or toothpick to clean the screens in the machine. Reconnect the hoses and turn the water back on.
House water heater is Make sure house water not set properly heater is delivering water
at 120°F.–140°F. (48°C.–60°C.).
13
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Before you call for service…
14
Troubleshooting Tips
Problem Possible Causes What To Do
Water won’t drain
Drain hose is kinked or Straighten drain hose and improperly connected make sure washer is not
sitting on it.
Top of drain outlet should
be less than 8 ft. above floor.
Water leaks
Fill hoses or drain hose is Make sure hose improperly connected connections are tight at
faucets and make sure end of drain hose is correctly inserted in and secured to drain facility.
Household drain may Check household be clogged plumbing. You may need
to call a plumber.
Constant water pressure Tighten hoses at the to the fill hoses at the faucets and turn the water water source off after each use.
Check condition of the fill
hoses; they may need replacement after 5 years.
Washer is noisy
Washer is uneven Make sure washer is level
and firm to the floor.
Washer load is Push the Cycle knob in to unbalanced stop the washer, open the
lid and redistribute the load evenly. Close the lid and restart.
Washer pauses in cycle
The washer normally pauses between washing steps
Clothes too wet
Incorrect cycle selected Make sure the cycle
selected matches the load you are washing.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Problem Possible Causes What To Do
Lint or residue on clothes
Incorrect sorting Separate lint producers
from lint collectors.
Washing too long Wash small loads for a
shorter time than larger loads.
Detergent not dissolving Add detergent as wash
basket fills with water, before you load clothes.
Try a liquid detergent.
Use warmer water
temperature.
Overloading Load clothes no higher
than the top row of holes in the washer tub.
Make sure load size
selector matches clothes load size.
Incorrect use of fabric Check fabric softener softener package for instructions
and follow directions for using dispenser.
Colored spots
Incorrect use of fabric Check fabric softener softener package for instructions
and follow directions for using dispenser.
Pretreat stain and rewash.
Dye transfer Sort whites or lightly
colored items from dark colors.
15
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Before you call for service…
16
Troubleshooting Tips
Problem Possible Causes What To Do
Wrinkling
Improper sorting Avoid mixing heavy items
(like work clothes) with light items (like blouses).
Try a fabric softener.
Overloading or Load your washer so incorrect water level clothes have enough room
to move freely.
Incorrect wash and Match Cycle selection to dry cycles the type of fabric you are
washing (especially for easy care loads).
Repeated washing in Wash in warm or cold water water that is too hot with plenty of detergent.
Too many suds
Type of detergent Switch to a lower sudsing
detergent brand and follow instructions on package.
Very soft water Try less detergent.
Snags, holes, tears, rips
Pins, snaps, hooks, sharp Fasten snaps, hooks,
or excessive wear
buttons, belt buckles buttons, and zippers. zippers, and sharp objects
Remove loose items like
left in pockets
pins, objects in pockets and sharp buttons.
Turn knits (which snag
easily) inside out.
Undiluted chlorine bleach Check bleach package
instructions for proper amount.
Never add undiluted
bleach to wash or allow clothes to come in contact with undiluted bleach.
Chemicals like hair bleach Rinse items that may have or dye, permanent wave chemicals on them before solution washing.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Problem Possible Causes What To Do
Pilling
Result of normal wear on While this is not caused by poly-cotton blends and the washer, you can slow fuzzy fabrics the pilling process by
washing garments inside out.
Grayed or yellowed
Not enough detergent Use more detergent
clothes
(especially with larger loads).
Hard water Use a water conditioner
like Calgon brand or install a water softener.
Water is not hot enough Make sure water heater is
delivering water at 120°F.–140°F. (48°C.–60°C.).
Washer is overloaded Select load size to match
clothes load.
Detergent is not Add detergent as wash dissolving basket fills with water
before you load clothes.
Dye transfer Sort clothes by color. If
fabric label states
wash
separately,
unstable dyes
may be indicated.
17
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Notes
18
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
19
For The Period Of: We Will Replace, At No Charge To You:
One Year Any part
of the washer which fails due to a defect
From the date of the
in materials or workmanship. During this
full one-year
original purchase warranty,
we will also provide,
free of charge,
all labor and
in-home service to replace the defective part.
Five Years The transmission,
if it should fail due to a defect in
From the date of the
materials or workmanship. During this
five-year limited
original purchase warranty,
you will be responsible for any labor or in-
home service costs.
Twenty Years The washer basket,
if it should fail due to a defect in
From the date of the
materials or workmanship. During this
twenty-year
original purchase limited warranty,
you will be responsible for any labor
or in-home service costs.
RCA Washer Warranty
All warranty service provided by our Factory Service Centers, or an authorized Customer Care
®
technician. For service,
call 800-GE-CARES.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. In Alaska, the warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Service trips to your home to teach you
how to use the product.
Improper installation.
Failure of the product if it is
abused, misused, or used for other than the intended purpose or used commercially.
Replacement of house fuses or
resetting of circuit breakers.
Damage to the product caused by
accident, fire, floods or acts of God.
Incidental or consequential damage to
personal property caused by possible defects with this appliance.
What Is Not Covered:
Warrantor: General Electric Company. Louisville, KY 40225
Service Telephone Numbers.
Expert GE repair service is only a phone call away.
In-Home Repair Service
800-GE-CARES (800-432-2737)
TDD 800-TDD-GEAC (800-833-4322)
Consumers with impaired hearing or speech who have access to a TDD or a conventional teletypewriter may call to request information or service.
Special Needs Service
800.626.2000
Purchase a GE service contract while your warranty is still in effect and you’ll receive a substantial discount. GE Consumer Service will still be there after your warranty expires.
Service Contracts
800-626-2224
Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted).
Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
Parts and Accessories
800-626-2002
If you are not satisfied with the service you receive, follow these three steps.
First,
contact the people who serviced your appliance.
Next,
if you are still not pleased, write all the details—including your phone number—to: Manager, Consumer Relations, RCA Appliances, Appliance Park, Louisville, KY 40225.
Finally,
if your problem is still
not resolved, write:
Major Appliance Consumer Action Program 20 North Wacker Drive, Chicago, IL 60606.
Service Satisfaction
Printed in Louisville, KY
6-97 CG (JR)
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Loading...