GE XVR16 VME SBC Data Sheet

Intelligent Platforms

XVR16

4th Generation Intel® Core™ i7 Based Rugged VME Single Board Computer

Features

• Single slot 6U VME Single Board Computer

• 4th Generation Intel Core i7 quad core processor

• Two channels of soldered DDR3 SDRAM with ECC up to 16 GB

• Up to 6 MB shared cache

• Up to 64 GB NAND Flash

• On-board Expansion sites – 2x XMC - x8 PCIe Gen 3 capable – 2x PMC - PCI-X 133 MHz

• Front I/O: – 2x Gigabit Ethernet ports (second port is optionally available) – 1x DisplayPort – 2x USB ports (USB 3.0 optional) – 1x COM port – 1x Power button – 1 x eSATA (optional)

• Rear IO: – 2x Gigabit Ethernet ports (VITA 31.1) – 2x VGA – 2x DVI – 2x SATA Gen3 ports, RAID capable – 2x COM ports – 2x USB 2.0 ports – 1x Audio – 12x GPIO – 2x PMC rear I/O – 2x XMC rear I/O

• BIOS backup Flash

• Optional on-board SATA HDD

• Optional conduction cooling

• Optional extended operating temperature range

• AXIS and Deployed Test Software

• Microsoft VxWorks

• Five Levels of Ruggedization

The XVR16 Rugged Single Board Computer (SBC) from GE Intelligent Platforms features the high performance, highly integrated 4th Generation Core i7 processor platform from Intel

4th Generation Core i7 offers integrated graphics and memory controller plus quad core processing up to 2.4GHz all in one device. Coupled with the Mobile Intel QM87 Express Chipset this provides an unmatched level of I/O bandwidth for both on-board and off-board functions.

Features of the 4th Generation Core i7 processor

• Graphics support for DX11.1, OpenCL 1.2,

OpenGL 3.2

• 5 to 15% CPU performance boost over

3rd generation

• Intel TurboBoost Technology

• Intel AVX 2.0 extensions and

AES-NI instructions

• Hardware assisted security features

• Hyper-Thread Technology – 2 threads

per core

Windows®, Linux® and

OS support

In addition to a comprehensive range of onboard I/O features, the XVR16 also offers two on-board mezzanine expansion sites for enhanced system flexibility, both of which offer PMC and XMC capability. Memory resources include up to 16 GB DDR3 SDRAM, up to 64 GB NAND Flash, optional SATA hard drive, BIOS Flash and BIOS backup Flash.

The XVR16 is designed to meet the requirements of a wide range of applications from industrial through to fully rugged Defense and Aerospace programs. It offers extended temperature capability and a range of air and conduction cooled build levels.

A rich software choice is planned for the XVR16, including comprehensive Deployed Test Software (BIT and BCS) and AXIS, plus OS support for Microsoft Windows 7, Open Linux, Wind River Linux, VxWorks.

XVR16 - Intel 4th Generation Core i7 Based Rugged VME Single Board Computer

A3 (not available if rear USB 3.0 selected)

Specifications

Processor

• Intel 4th Gen. Core i7 Processor

• i7-4700EQ (Quad Core) @ 2.4 GHz (47W) base frequency, up to 3.4 GHz TurboBoost

(Note: CPU s peed is depen dent on environ ment, consult manual

for details)

• 22 nm monolithic die processing technology

• 6 MB Last Level Cache

SDRAM

• Maximum memory conﬁguration of dual channels up to 16 GB DDR3L SDRAM soldered with ECC

Flash Memory

• Up to 64 GB via two devices per board

BIOS

• 1x 16 Mb for BIT and BIOS plus 1x 16 Mb for redundancy

Ethernet

• Gigabit Ethernet interface via Intel 82574 Gigabit Ethernet controllers – routed to front panel. Second GigE por t is optional (precludes use of XMC / PMC site 2)

• Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to rear

USB Ports

• Two USB 2.0 ports routed to rear P2 connector

• One USB 2.0 port routed to front panel

• One USB 3.0 port (optional) routed to front panel (precludes use of XMC/PMC site 2)

VME Backplane Interface

• 2eSST capable via TSi148 (ANSI/VITA 1.5-2003 offering bandwidths up to 320 MB/s)

Serial Ports

• Three 16550 compatible full duplex async serial ports

• One routed to front panel RS-232 (COM3)

• Two routed to P2, with user selectable RS-232/422/485

• Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud

PMC/XMC Expansion

• Up to two on-board mezzanine expansion sites

- Site 1 PMC (PCI-X up to 64-bit /133 MHz) and XMC

(x8 PCIe Gen 2) capable; PMC rear IO routed to P0

- Site 2 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x8

PCIe Gen 2) capable; PMC and XMC rear IO routed to P2

• PCI signaling is 3.3V, 5V tolerant

• 25W per site capable mezzanine power supply

Audio

• High Deﬁnition Audio Codec

• Stereo line in and stereo line out

Video

• Up to three independent displays

- One DisplayPor t routed to front panel

- Two VGA ports routed to P0/P2

- Two DVI ports routed to P0/P2

SATA

• Two SATA ports to rear I/O

• One eSATA port (optional) routed to front panel (precludes use of XMC / PMC site 2)

Block Diagram

GigE (option)SATA 1

Intel Haswell CPU

XMC 2 / PMC 2 optioned with onboard Hard Drive

PCI-X

XMC

PMC/XMC 2 IO (P2)

PMC/XMC 1 IO

VGA 2

Optional front IO (precludes use of XMC/PMC site 2)

DVI-D 1 (P2)

DVI-D 1 (P3)

Mux

eDP to

VGA

Display/Port

x4 PCIe

PCIe to

PCIX

VGA 1 optioned w/PMCIO out P2

eDP

4/8 GB DDR3L

PCIe –

Mux

PCI-X

x8 PCIe

VME

P1 / P2

XMC

PMC

RJ45

DisplayPort

Gig E (optional)

P0 P0

COM 2

COM 1

w/Mag

Springville

GigE

Springville

GigE

Springville

GigE

Springville

GigE

Clarksville

GigE PHY

VGA 1

Gig E

DVI 1

USB 2.0

PCIe x1

USB 2.0

MRAM

TPM

IPMI

w/power

monitoring

PMC/XMC 2 IO

GPIO

SATA

SSD

SATA

SSD

GPIO (P2)

COM3

LPC

Intel Lynx Point

IO Hub

SATA

USB 3.0 eSATA

COM1 (P2)

Lattice

FPGA

COM2 (P2)

HDA

Audio Codec

Audio (P0)

SPI

VGA 2

(P0)

DVI-D 2

GPIO

• 12 GPIO pins – software conﬁgurable

On-board Hard Drive

• SATA hard drive or SSD can be optionally ordered (precludes use of PMC/XMC site 2)

LED

• 3x status LEDs and four BIT status

Power Requirements

• +5, +3.3V

• +/-12V for mezzanine only

MRAM/ Watchdog/ Timers/ TPM

• 512 kB non-volatile RAM (MRAM)

GigE

Backup

BIOS

BIOS / BIT

FDI

DMI

Hard Drive

option

PCIe –

PCI-X

PMC

SATA2

SAT

GigE

Audio

GigE

P0 P1

• Software programmable watchdog

• Timers in CPLD (SW programmable)

• HW support for TXT [VPRO]

Temperature Sensor

• Onboard ambient temperature; CPU

Other HW Features

• Hardware Write Protection

• Front power button LED

• BMC (IPMI)

• JTAG via rear

Transition Module

• New RTM with Mezzio sites

Environmental

Level 1 Level 2 Level 3 Level 4 Level 5

Cooling Method Convection Convection Convection Conduction Conduction

Conformal Coating Optional Standard Standard Standard Standard

High/Low Temp 0 to 55°C -20 to +65°C -40 to +75°C -40 to +75°C -40 to +85°C

Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall

Random Vibration 0.002g2/Hz* 0.002g2/Hz* 0.04g2/Hz** 0.1g2/Hz** 0.1g2/Hz**

Shock 20g*** 20g*** 20g*** 40g*** 40g***

* With a ﬂat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration

Note: Processor performance and temperature are inter-dependent. For a given temperature, a maximum speed is achievable, and conversely for a given processor speed

a maximum temperature is achievable. Consult the product manual for details.

GE Intelligent Platforms Contact Information

Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.gedefense.com/contact

www.gedefense.com

03.15 GFA-2029A