GE WMTS Data Sheet

GE

Lighting Solutions

Area Lighting

Wallmount™ 400 (WMTS)

imagination at work

Product Features

For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those out­door lighting needs where a wall-mounted fixture is the only practical choice.

Applications

• Building perimeter security, high-activity entrances,
loading docks and small work areas adjacent to
buildings

• Wall mounted luminaire applications where high
light levels and low costs are required

Housing

• Die-cast aluminum housing means rugged,
long-lasting construction

Finish

• Dark Bronze polyester powder paint finish is
standard. Provides corrosion resistant finish

Rating

• 1598 Listed Suitable for Wet Locations

/

Reflectors

Unique Features

• Easily removable, side-hinged, gasketed door

• Complete front access to lamp and ballast for easy
maintenance and relamping

• Multiple threaded conduit entrances

• Factory-installed UL Listed internal button photo
electric control provides dusk-to-dawn operation.
Field installed (Non-UL Listed) PE kit is optional

• Mogul base porcelain lamp socket – E39 standard

• Improved packaging design keeps glass refractor
and die-cast housing separate
to significantly reduce chances of glass fracture
during shipment

• Enclosed and gasketed borosilicate glass
refractor provides long-lasting, non-yellowing
optics with high thermal and impact resistance

Ordering Number Logic

Wallmount™ 400 (WMTS)

W M T S D B
_ _ _ _ - _ _ - _ - _ - _ _ - _ _

PROD. ID

WMTS =

Wallmount 400
Luminaire

WATTAGE

17 = 175
25 = 250
40 = 400

LIGHT

SOURCE

E = Energy Act

Compliant Pulse
MH (EPMH)

S = HPS

Standard: Lamp
not included

VOLTAGE COLOR

60Hz
0 = 120/208/

240/277
Multivolt

1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347

DB = Dark Bronze

Standard

*NOTE: Factory
installed PE require
longer lead times.
Contact Manufacturer.

F = Fusing (Not Available on multivolt or 120 x 347)
PE = Factory-installed button photoelectric control.

Discrete voltage required — specify 120, 208, 240, 277 or 347 volt.

*NOTE: Not available in 120x347 or 480 volt.

Ballast and Photometric Selection Table

All light sources are clear unless otherwise indicated.

Photometric
Light Curve Number
Wattage Source Multivolt 480 120 X 347 35-

250 HPS A A A 171134
400 HPS A A A 171133

175 EPMH A A A 171137
250 EPMH A A A 171135
250 EPMH (Coated) A A A 171136
400 EPMH A A A 171131
400 EPMH (Coated) A A A 171132

Ballast Type/Voltage
60Hz

OPTIONS

Product Dimensions

0.31-in. (8 mm) DIA. MOUNTING HOLES (3 PLACES)

6.09 in.

(155 mm)

12.17 in.

(309 mm)

13.00 in.

(330 mm)

5.53 in.

(142 mm)

18.11 in.

(460 mm)

Accessory Dimensions

PHOTOELECTRIC CONTROL KIT WIRE GUARD WG-WMTS POLYCARBONATE VANDAL SHIELD

2.13 in. (54 mm)

6.13 in.

(156 mm)

10.50 in.
(267 mm)

BUTTON PC

10.09 in.

16.12 in.

(409 mm)

(256 mm)

LVS-WMTS

17.00 in.

(432 mm)

9.00 in.

(229 mm)

APPROX.

14.000 in.
(356 mm)

• Approximate Net Weight: 25-40 lbs (11-18 kgs)

• Suggested Mounting Height: 8-20 ft. (2-6 M)

DATA

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.

OLP-2953 (Rev. 06/19/12)