Page 1
GE
Lighting Solutions
Area Lighting
Wallmount™ 175 (WM7M & WM7S)
imagination at work
Page 2
Product Features
For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances,
walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
• Building perimeters, entrances, walkways, residential
yards and loading docks
• Area lighting applications where a glass refractor is
needed or desired
Housing
• Die-cast aluminum housing and door
Finish
• Dark bronze polyester powder finish
• Electrocoat paint finish
Rating
• 1598 Listed Suitable for Wet Locations
• listed to Canadian National Standards and Codes
/
Mounting
• Multiple junction box mounting patterns (3.25 in.
[83mm] octagonal, 4-in [102mm] octagonal,
2-in. X 4-in. [51X102mm] rectangle)
Unique Features
• Standard and tamper-resistant hardware included
• Complete front acess to ballast and lamp
• Side-hinged front door
• Top .5 in. (13mm) threaded conduit entrance
• Knock-out for field installed photoelectric control kit
(Order kit separately)
• Two socket sizes available: mogul base – E39
standard and medium base – E26 standard (lamp
included with medium base)
• Enclosed and Gasketed
Reflectors
• Prismatic borosilicate refractor
• “Snap-in” anodized aluminum reflector
Page 3
Ordering Number Logic
Wallmount™ 175 (WM7M & WM7S)
S N 4
_ _ _ _ - _ _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
WM7M =
Wallmount
175 Luminaire
(Mogul Base
E39 Socket
Standard
without Lamp)
WM7S =
Wallmount
175 Luminaire
(Medium Base
E26 Socket
Standard with
Lamp)
WATTAGE
See Ballast and
Photometric
Selection Table
05 = 50
07 = 70
10 = 100
15 = 150 (55V)
17 = 175
LIGHT
SOURCE
See Ballast and
Photometric
Selection Table
E = Energy Act
Compliant Pulse
MH (EPMH)
S = HPS
M = MH
P = PMH
BALLAST
VOLTAGE COLOR
See Ballast and
Photometric
Selection Table
60Hz
0 = 120/208/
240/277
Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
C = 120x240x
277V
D = 347
F = 120X347*
T = 220
50Hz
6 = 220
*NOTE: 120X347V
connected for
120V
TYPE
SELECTION
See Ballast
and Photometric
Selection Table
A = Autoreg
H = HPF
Reactor or
Lag
K = Hot Restart*
N = NPF
Reactor or
Lag
*Available in
WM7M only.
(Non-UL)
FUNCTION
1 = None
3 = Internal
* Not available
with multivolt
or 480V
PE
*PE control
IES
DISTRIBUTION
TYPE
See Ballast and
Photometric
Selection Table
SN4 = Short,
Non-cutoff, Type IV
DB = Dark Bronze
GR = Gray
OPTIONS
B = Time Delay Automatically
Switched Quartz
F = Fusing—Not available with
multivolt or 120X347 volt
(Non-UL)
L = Latch on door
(Non-UL)
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Ballast Type/Voltage Ballast Type/Voltage
IES Photometric
Light 208, 347, Distribution Curve Number
Wattage Source Multivolt 120 240, 480 277 120X347 220 220 Type 35-
WM7M Mogul Base Without Lamp
50, 70, 100, 150 (55V) HPS H, N H, K , N H, N H, N H H H SN4 177576
175 MH N/A N/A N/A N/A A A A SN4 177580
WM7S Medium Base With Lamp
50, 70, 100, 150 (55V) HPS H, N H, N N/A H,N N/A N/A H SN4 177576
70, 100 PMH H N/A N/A N/A N/A* N/A H SN4 177580
150**** PMH H*** H H H,A H,A N/A N/A SN4 177580
NOTE: N/A = Not Available. **347 available “H” ***150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V
****150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
60Hz 50Hz
Page 4
Product Dimensions
4.375 in.
(111 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH GEMBOX
(2 PLACES)
.500 in. (13 mm) NPT
CENTERLINE
1.312 in.
(33 mm)
.615 in. DIA (41 mm) DIA KNOCKOUT
FOR PHOTOELECTRIC KIT
2.875 in.
(73 mm)
.312 in. (8 mm) DIA
KNOCKOUT
(4 PLACES)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 3.000 in. (76 mm)
OCTAGON BOX (4 PLACES)
5.774 in.
(147 mm)
.875 in. (22 mm) DIA
KNOCKOUT
9.750 in.
(248 mm)
7.750 in.
(197 mm)
.188 in. (5 mm) DIA KNOCKOUT
FOR USE WITH 4.000 in. (102 mm)
OCTAGON BOX (4 PLACES)
7.950 in.
(202 mm)
.625 in.
(16 mm)
12.625 in.
(321 mm)
BACK VIEW SIDE VIEW FRONT VIEW
• Approximate Net Weight: 20-25 lbs (9-11 kgs)
• Suggested Mounting Height: 8-20 ft. (3-6 M)
DATA
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2952 (Rev. 06/19/12)
Loading...