GE UME Specification Sheet

UME UNIMOUNT ™ 400 LUMINAIRE NUVATION ™ Electronic Ballast

Low Bay, Enclosed – Surface Mount Optical Series

APPLICATIONS

• For 10-25 ft. (3-8 meter) applications in factories, foundries, canneries, textile, metal, chemical, rubber, food, cement and other industrial applications

SPECIFICATION FEATURES:

• 1598 Listed

Suitable for Damp Location

• 1598 Listed for metal halide lamps in polymeric lamp containment barriers

• UV stabilized injection molded prismatic refractor for low brightness

• Enclosed and gasketed optics

• 55° C ambient, standard

• Nuvation ™ electronic ballast:

• Dimming Option — dims lamp to 50% of rated lamp wattage.

• Two piece heavy-duty die cast aluminum housing

• Integral optical mounting design

for GELS “Surface Mount Opticals”

ORDERING NUMBER LOGIC

UME

PRODUCT IDENT

XXX UME = Unimount 400

Luminaire Surface

Mount

optical

with

Nuvation Electronic Ballast

COLOR

X W = White

Polyester Powder

WATTAGE

25 = 250 32 = 320 35 = 350 40 = 400

LIGHT SOURCE

N = Ballast will operate Pulse Start or Ceramic Metal Halide Lamps Note: Lamp is vertical base up. Lamp is not included.

PHOTOMETRIC SELECTION TABLE

EA OPTICAL - Enclosed Optical

Wattage Source Criteria Position Curve Code Code 250 MH 1.7 G 177155 EA, ES AG

400 MH 1.9 A 177013 EA, ES AA 400 MH(Coated) 1.6 A 177014 EA , ES AA 250 P (MH) 1.7 G 177155 EA, ES AG

320(ED28)* P (MH) 1.7 G 177155 EA, ES AG 320, 350 P (MH) 1.9 A 177013 EA, ES AA 400 P (MH) 1.9 A 177013 EA, ES AA 400 P (MH)(Coated) 1.6 A 177014 EA, ES AA 400 HPS 1.9 F 177011 EA, ES AF

WA OPTICAL - Enclosed Optical with White Inside Reector

Wattage Source Criteria Position Curve Code Code 250 MH 2.0 H 178672

400 MH 2.0 A 178674 400 MH (Coated) 1.4 A 451384 250 P (MH) 2.0 H 178672

320(ED28)* P (MH) 2.0 H 178672 320, 350 P (MH) 2.0 A 178674 400 P (MH) 2.0 A 178674 400 P (MH)(Coated) 1.4 A 451384

320 watt, ED28 pulse start MH

Note: See page T-34 of Product Selection Guide, GEA-12000, for Alternative lens material explanation

Light Spacing Socket Photometric Optical Photometry

VOLTAGE

X G = 208-277

Discrete Voltages must be specied

when

ordering cord & plug assemblies:

2 = 208 3 = 240 4 = 277

BALLAST TYPE

X E=

Electronic

C= Dimming

OPTICAL CODE

EA = Enclosed Acrylic Refractor WA = Enclosed Acrylic Refractor with inside of Reector Painted White

WA, WS

PHOTOMETRY CODE

XX XX = Select

Code

Below

• Attractive round ballast housing design with white polyester paint nish

• Integral air gap between optical mounting and ballast for optimum temperature control and thermal management

• Slide-on mounting box adaptor with 3/4-in pendant and thru feed capability for ease of installation and mounting.

• External wattage selection port for selection of 250, 320, 350 & 400 watt

choices.

• Safety chain provisions

• Mogul base socket – E39 standard

• Shipped as components: Ballast, Optical. Magnapack available for ballast.

MOUNTING CODE

11= Pendant Slide on Box 15 = Prewire with Loop, Cord and Plug

part “Power Hook”. (Order Receptacle/ Hook Box separately)

Discrete Voltages must be specied when ordering cord & plug assemblies below: 31 = Prewired with Hook, 3 ft. (0.9 meters) #16/3 Cord and NEMA PLUG 33 = Prewired with Loop, 3 ft. (0.9 meters) #16/3 Cord and NEMA PLUG (Order

Locking Receptacle Separately, if required)

MODULAR PREWIRE 41 = ACS with 3 ft (.9 meter) cord & Hook 69 = ACS with 6 ft (1.8 meter) cord & Hook 43 = ACS with 3 ft (.9 meter) cord & Loop 70 = ACS with 6 ft (1.8 meter) cord & Loop

PLUG-N-GO 51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook 71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook 53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop 72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop

Note: ACS = Flex 3+ Plug-N-Go = FSC Series

All Electronic devi ces are su sceptibl e to transient voltage spikes. For facilities where the lighting circuits are not protected from transient voltage spikes a (TVSS) Transient Voltage Surge Suppression system is recommended. To protect the NuVation ballast a TVS protection system must be able to suppress a 3000V ring wave as described in ANSI/IEEE C62.41 B1.

OPTIONS

Q = Automatic switched quartz

S =

Exclusionary mogul base socket for MH open xtures

W = Wet

Location

(Available for use with Mountings 11 and 15 only)

I-26/2008

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

UME UNIMOUNT

NUVATION

™

400 LUMINAIRE

™

Electronic Ballast

Low Bay, Enclosed – Surface Mount Optical Series

NOTES

See explanation on “Optical Flexibility” Page I-4. See References.

REFERENCES

See Page I-104 for start of Accessories. See Page I-117 for Component Ordering Logic. See Page I-129 for Explanation of Options and Other Terms Used.

3/4 in. NPSC Thread

FIXTURE DIMENSIONS

15.00 in. Dia. (381mm)

Fixture Height

26.98 in.

(685mm)

DATA

Approximate Net Weight lbs kgs Ballast and Optical 27 12

BALLAST DATA

* 13% Improvement in Pulse Start Metal Halide lamp lumen maintenance vs. magnetic. * 6% improvement in Ceramic Metal Halide lamp lumen maintenance vs. magnetic. * 50% lower ballast losses than typical CWA magnetic HID ballast. * Lamp wattage regulation of +/-2% change for +/-10% change in line voltage. * Ballast is rated for use with voltage range between 208 and 277 with +/-10% line voltage tolerance, 50/60 Hz, and will

automatically sense voltage within specied range. * Ballast input current total harmonic distortion (THD) of less than 15% when operated at nominal line voltage. * Ballast is thermally protected to shut o when operating temperatures are above unacceptable levels for the ballast safe and reliable operation. * Ballast has an end-of-lamp-life detection and shutdown circuit.

* The ballast shall have a minimum starting temperature of –20 degrees F and maximum operating ambient of 55 degrees C..

* Ballast is capable of operating pulse start metal halide or ceramic metal halide lamp types. * Five-Year Fixture Failure Warranty. * Meets requirements of FCC rules and regulations, Title 47 CFR part 18 for nonconsumer equipment.

Dimming Ballast

* The ballast is supplied with a violet (+) and gray (-) wire for dimming control connections. * Ballast dims to fty percent of rated lamp wattage. * Dimming voltage is 0-10V where 10V is high wattage and 0 is fty percent of rated lamp wattage. * Ballast operates the lamp at high wattage for 15 minutes at start up. * Ballast operates lamp at high wattage for fteen minutes after operating in dim mode for twenty-four hours.

31.44 in. Dia. (799mm)

INPUT WATTAGE TABLE

Lamp Line Input Wattage Voltage Watts

400 277 428 400 240 432 400 208 435 350 277 377 350 240 380 350 208 383 320 277 346 320 240 347 320 208 349 250 277 276 250 240 272 250 208 271

® Registered Trademark of General Electric Company

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

Trademark of General Electric Company

Data subject to change without notice

2008/I-27