GE Ultra Sport GRH-5736F Instructions Manual

GE
g
READ THOROUGHLY BEFORE INSTALLING
Lighting Solutions
WARNING
Risk of electric shock
Turn power off before servicingsee instructions
NOTE: Make all electrical connections in accor­dance with the National Electrical Code and any applicable local code requirements.
NOTE: This luminaire is equipped with a safety circuit to prevent lamp operation if the reflector lens is broken. Complete optical assembly must
be replaced if the reflector lens is broken.
This luminaire is shipped with the lamp installed.
This luminaire is designed for use in outdoor applica­tions and should not be used in areas of limited ventila­tion or high ambient temperature enclosures unless otherwise stated on nameplate. Install and maintain it according to the following recommendations.
GEH-5736F
INSTRUCTIONS
Ultra SportTM Floodlight
CAUTION
Unit will fall if not installed properly
Follow installation instructions
NOTE: Verify that supply voltage is correct by comparing it to nameplate.
Do not place combustible materials within 7 feet (2 meters) of the front of the reflector lens.
NOTE: Connect ground lead to the green lead,
green ground screw on housing or terminal block
provided.
Replace power fuses only with fuses of the same
type and ratings.
WARNING
Risk of fire
Keep combustible materials away
from lens – see instructions
Use lamps specified on nameplate
Step 1 — POWER CABLE INSTALLATION
A . Disconnect Power B. Remove Cover (a) C . Loosen clamp (b)
Insert cable thru clamp and grommet
D . Splice leads (c)
to power cable E . Tighten clamp (b) F. Replace cover (a) NOTE: Use 9/16 OD-
cable only. 3 conductor AWG #14
SEO 105C cable is recommended.
Step 2 — LUMINAIRE MOUNTING
Step 3
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to GE Lighting Solutions.
Loading...
+ 2 hidden pages