Ultra Pro Hover
HD 250 Amplified
Antenna Bar
User’s Manual
2
Introduction: The 37075 Ultra Pro Hover HD 250 Amplified
Antenna Bar is specifically designed to receive digital TV
reception. The sleek and stylish design will blend in with any
décor and fit most HD televisions.
Important safety instructions:
• USE only indoors.
• DO NOT install in wet locations or locations that can
get wet.
Features:
• VHF/UHF/HDTV
• TV/wall/table mountable
• Stylish slim profile
• Low noise amplifier
Package Contents:
• Digital Indoor Antenna with TV mount
• Wall mounting hardware
• UL-listed power adapter
• Low noise amplifier
• User’s manual
Wall mounting
hardware
UL-listed
power adapter
Digital indoor antenna
3
Antenna Assembly & Installation:
1. After removing Antenna from package, select the
mounting method you prefer and place the antenna in the
desired location.
a. Mount above TV or to wall.
b. Lay the antenna flat.
c. Use the TV mount (as shown below).
Note: When mounting to your HD television, in order to
get the antenna to fit properly, please adjust the
television mounting bracket by opening it enough so
that the antenna sits flush on the television. When
moving the bracket you should hear a click when
opening or closing the mount to know that it is working.
Note If you want to lay the antenna flat on a surface
you can remove the antenna stand with a Philips head
screwdriver.
2. Connect the coax cable from the antenna to the low
noise amplifier.
3. Connect the low noise amplifier into the TV.
4
4. Connect the UL-listed power adapter and plug into an
available wall outlet. Note: UL listed power adapter
needs to be plugged in for the antenna to work
properly.
a. If desired use the supplied adhesive strips to mount the
amplifier to the back of your TV.
5. SCAN FOR CHANNELS ON YOUR TV: This step is very
important. Your TV will NOT receive signals from the antenna
without doing a channel scan. See your TV’s menu for this
process. You can also refer to the TV instruction manual for
detailed instructions.
Note: If you have poor TV reception after scanning
for channels, go back to Step 2 and remove the low noise
amplifier and connect the antenna directly into the TV.
Remember to re-scan for channels if you do this.
Note: It is important to repeat this process and re-scan
for channels anytime you move the antenna, re-position
the antenna.
6. Contact us at 1-800-654-8483 if you need assistance.
Antenna helpful tips
Maximize the number of channels you receive by placing the
antenna in several different locations to see which location provides
the best reception and the maximum number of channels. Be sure
to run a new channel scan on your TV in each position. Refer to the
instruction manual that came with your TV if you are not sure how
to do this.
Position or mount the antenna as high as possible or near a window
for best performance.
Visit www.antennaweb.org or www.dtv.gov and look for the DTV
Reception Maps to determine the available television stations and
location of the broadcast towers in your area.
MADE IN CHINA
GE is a trademark of General Electric Company and is under
license by Jasco Products Company LLC, 10 E. Memorial Rd.,
Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact us at 1-800-654-8483 between
7:00AM—8:00PM CST.
37075
V2
9-6-2017
Loading...