GE UGE Data Sheet

UGE UNIGLOW ™ 400 LUMINAIRE NUVATION ™ Electronic Ballast

High Bay, Open or Enclosed – Surface Mount Optical Series

APPLICATIONS

•

For over 20-foot (6 meter) applications, warehouses, handling, general assembly, manufacturing and

other indoor lighting areas where high intensity discharge (HID) light sources are applicable.

SPECIFICATION FEATURES:

• 1598 Listed

Suitable for Damp Location

• Choice of open or enclosed opticals

• Clear tempered door glass lens on enclosed units

• 55° C ambient, standard

• Nuvation ™ electronic ballast:

• Dimming Option — dims lamp to 50% of rated

lamp wattage.

• Two piece heavy-duty die cast aluminum housing

• Integral optical mounting design for GELS “Surface Mount Opticals”

• Attractive round ballast housing design with white polyester paint nish

ORDERING NUMBER LOGIC

UGE

PRODUCT IDENT

XXX UGE = Uniglow 400 Luminaire Surface Mount optical with NuVation electronic ballast

PHOTOMETRIC SELECTION TABLE

V2 OPTICAL - Open 22 in. Reector

Wattage Source Criteria Position Curve Code Code 400 MH 1.0 E 177042 V2 AE

V7 OPTICAL - Open 17 in. Reector

320, 350, 400 320, 350, 400 320, 350, 400 320, 350, 400 320, 350, 400 320, 350, 400

E7 OPTICAL - Enclosed 17 in. Reector

250 MH 1.1 G 177105 E7 AG 400 MH 1.5 A 177104 E7 AA 250 P (MH) 1.1 G 177105 E7 AG 320(ED28)* P (MH) 1.1 G 177105 E7 AG 320, 350 P (MH) 1.5 A 177104 E7 AA 400 P (MH) 1.5 A 177104 E7 AA

*320 watt, ED28 pulse start MH Use open optical photometrics and reduce values by 10% for enclosed opticals

COLOR

X W = White Polyester Powder

WATTAGE

25 = 250 32 = 320 35 = 350 40 = 400

Light Spacing Socket Photometric Optical Photometry

MH 1.5 A 176791 V7 AA MH 1.9 E 177108 V7 AE MH(Coated) 1.3 A 176788 V7 AA P (MH) 1.5 A 176791 V7 AA P (MH) 1.9 E 177108 V7 AE P (MH) Coated 1.3 A 176788 V7 AA

LIGHT SOURCE

= Ballast will operate Pulse Start or Ceramic Metal Halide Lamps Note: Lamp is vertical base up. Lamp is not included.

VOLTAGE

X G = 208-277 Discrete Voltages must be

specied

when ordering cord & plug assemblies:

2 = 208 3 = 240 4 = 277

BALLAST TYPE

X E= Electronic C= Dimming

OPTICAL CODE

E7 =

Enclosed

17-in.

Reector

V7 = Open 17-in.

Reector

V2 = Open 22-in.

Reector

Note: Do not use open opticals with lamps

specied

for use in enclosed opticals only.

PHOTOMETRY CODE

XX XX = Select

Code Below

• Integral air gap between optical

mounting and ballast for optimum temperature control and thermal

management

• Slide-on mounting box adaptor with 3/4-in pendant and thru feed capability for ease of installation and mounting.

• External wattage selection port for

selection of 250, 320, 350 & 400 watt choices.

• Safety chain provisions

• Mogul base socket – E39 standard

• Shipped as components: Ballast, Optical.

Magnapack available for ballast.

MOUNTING CODE

11= Pendant Slide on Box 15 = Prewire with Loop, Cord and Plug part “Power

Hook”. (Order Receptacle/Hook Box separately)

Discrete Voltages must be specied when ordering

cord & plug assemblies below: 31 = Prewired with Hook, 3 ft. (0.9 meters) #16/3 Cord and NEMA PLUG 33 = Prewired with Loop, 3 ft. (0.9 meters) #16/3 Cord and NEMA PLUG (Order Locking Receptacle

Separately, if required)

MODULAR PREWIRE 41 = ACS with 3 ft (.9 meter) cord & Hook 69 = ACS with 6 ft (1.8 meter) cord & Hook 43 = ACS with 3 ft (.9 meter) cord & Loop 70 = ACS with 6 ft (1.8 meter) cord & Loop

PLUG-N-GO 51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook 71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook 53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop 72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop

Note: ACS = Flex 3+ Plug-N-Go = FSC Series

Exclusionary base socket is available for use with Metal Halide

lamps in open xtures to comply with NEC 2005 regulations (GELS “S” Option).

Customer should consult or review local electrical codes for compliance.

All Electronic devices are susceptible to transient voltage spikes. For facilities where the lighting circuits are not protected from transient voltage spikes

a (TVSS) Transient Voltage Surge Suppression system is recommended. To protect the NuVation ballast a TVS protection system must be able to

suppress a 3000V ring wave as described in ANSI/IEEE C62.41 B1.

OPTIONS

X Q = Automatic

switched quartz S = Exclusionary mogul base socket

for MH open xtures

W = Wet Location

(Available for use with Mountings 11 and 15 only)

I-22/2008

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

UGE UNIGLOW

NUVATION

™

400 LUMINAIRE

™

Electronic Ballast

High Bay, Open or Enclosed – Surface Mount Optical Series

NOTES

See explanation on “Optical Flexibility” Page I-4. See References.

REFERENCES

See Page I-104 for start of Accessories.

See Page I-117 for Component Ordering Logic. See Page I-129 for Explanation of Options and Other Terms Used.

3/4 in. NPSC

Thread

FIXTURE DIMENSIONS

15.00 in. Dia. (381mm)

Fixture Height

V7 - 27.25 in.

(692mm)

E7 - 27.75 in.

(705mm)

V2- 27.65 in.

(702mm)

DATA

Approximate Net Weight lbs kgs Ballast and Optical 15-30 7-14

BALLAST DATA

* 13% Improvement in Pulse Start Metal Halide lamp lumen maintenance vs. magnetic. * 6% improvement in Ceramic Metal Halide lamp lumen maintenance vs. magnetic. * 50% lower ballast losses than typical CWA magnetic HID ballast. * Lamp wattage regulation of +/-2% change for +/-10% change in line voltage. * Ballast is rated for use with voltage range between 208 and 277 with +/-10% line voltage tolerance, 50/60 Hz, and will

automatically sense voltage within specied range. * Ballast input current total harmonic distortion (THD) of less than 15% when operated at nominal line voltage. * Ballast is thermally protected to shut o when operating temperatures are

above unacceptable levels for the ballast safe and reliable operation. * Ballast has an end-of-lamp-life detection and shutdown circuit.

* The ballast shall have a minimum starting temperature of –20 degrees F

and maximum operating ambient of 55 degrees C..

* Ballast is capable of operating pulse start metal halide or ceramic metal halide lamp types. * Five-Year Fixture Failure Warranty.

* Meets requirements of FCC rules and regulations, Title 47 CFR part 18 for nonconsumer equipment.

Dimming Ballast

* The ballast is supplied with a violet (+) and gray (-) wire for dimming control connections. * Ballast dims to fty percent of rated lamp wattage. * Dimming voltage is 0-10V where 10V is high wattage and 0 is fty percent of rated lamp wattage. * Ballast operates the lamp at high wattage for 15 minutes at start up. * Ballast operates lamp at high wattage for fteen minutes after operating in dim mode for twenty-four hours.

V7 - 17.13 in. Dia. (435mm) E7 - 18.00 in. Dia. (457mm) P2 - 22.80 in. Dia. (579mm)

INPUT WATTAGE TABLE

Lamp Line Input Wattage Voltage Watts

400 277 428 400 240 432 400 208 435 350 277 377 350 240 380 350 208 383 320 277 346 320 240 347 320 208 349 250 277 276 250 240 272 250 208 271

® Registered Trademark of General Electric Company

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

Trademark of General Electric Company

Data subject to change without notice

2008/I-23