GE TX-1010-01-3, TX-1010-01-1 User Manual
GE
Models TX-1010-01-1, TX-1010-01-3
Security
Overview
With new wireless products from GE Security, smaller
really is better. Highlighted by sleek new designs, the
wireless family provides the modern look and feel you
demand, with the same robust GE wireless capability
you’ve come to expect.
Using the new GE Security DesignLine Door/Window
Sensor, alarm systems can be easily installed and provide
the highest level of intrusion protection available for
a home or business. These sensors monitor doors,
windows, cabinets, or anything that opens and closes.
Almost any building can be set up with a GE system
because of the DesignLine Door/Window Sensor’s small
size and flexible mounting configurations.
The GE DesignLine Door/Window Sensor provides
years of trouble-free operation because advanced circuit
technology makes this sensor extremely efficient
and reliable. The low current draw, coupled with a
high-capacity lithium battery, means five to eight years
between battery changes when sensors are used on
low-traffic openings.
DesignLine Slim Door/Window Sensor
Standard Features
• Low-profile design - Gives sleek modern look; fits in
any home or business
• Wireless technology - Easier and less costly to install;
safer because of flexible placement
• Advanced circuit technology - Supplies robust function
with low current draw
• Compatible with all GE Security 319.5 MHz control
panels and receivers
• Range - Functions at open-air distances of up to 500 ft.
• Battery operated - Runs on lithium coin cell battery
with typical life of 5 years
• Tamper-resistant case - Inhibits tampering and
improves security and durability
• External contact header allows connection of an
external hardwire contact
The wire-free nature of GE DesignLine Door/Window
Sensors means: less installation cost; less installation
damage from drilling holes and pulling wires; less time
spent on premises for the installer; and less compromise
to security due to the inflexibility of sensor location when
using hardwire sensors.
DesignLine Slim
Door/Window Sensor
Small, wireless design for the highest
level of intrusion protection
GE
1 in.
2.44 in.
0.35 in.
2.44 in.
1.30 in.
0.43 in.
1.30 in.
0.31 in.
Security
North America
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
E rs-bctinfo@ge.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9259-4700
F 61-3-9259-4799
Canada
T 800-267-6317
F 613-737-5517
Europe
T 32-2-725-11-20
F 32-2-721-40-47
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
Specifications subject to
change without notice.
© 2007 General Electric Company
All Rights Reserved
Specifications
Battery Panasonic CR2032, 3 VDC, 225 mAh, Lithium Coin Cell
Battery Life 5 years (typical)
Transmitter Frequency 319.508 MHz (crystal-controlled)
Transmitter Frequency Tolerance +/- 8 kHz
Bandwidth 24 kHz
Modulation Type Amplitude Shift Key (ASK)
Unique ID Codes 16 million
Peak Field Strength Typical 30,000 uV/m @ 3m
External Input Sampling Current 20 uA
Magnetic Sensitivity of Reed Switch 10 to 20 amp turns
Reed Sensitivity .38-in (.97-cm) gap
Magnet Type Nd-Fe-B, N45
Sensor Dimensions (WxHxD) 1 in x 2.44 in x 0.35 in
Supervisory Interval 64 minutes
Operating Temperature 10 degrees F (-12 degrees C) to 120 degrees F (49 degrees C)
Enclosure PC-540
Weight 0.55 oz (15g)
Magnet Dimensions (WxHxD) 0.43 in x 1.3 in x 0.31 in
Colors White or brown
FCC Standard FCC Part 15
Part Number Description Color
TX-1010-01-1 DesignLine Slim Door/Window Sensor White
TX-1010-01-3 DesignLine Slim Door/Window Sensor Brown
466-310-Slim DWS-DS-2007/10
Loading...