GE
GE
Lighting Solutions
Lighting Solutions
Decorative Post Top Lighting
Town and CountryTM (T10C & T10R)
imagination at work
Product Features
GE offers a variety of decorative Post Top and Pendant Mount Lighting solutions that range from the nostalgic looks
of yesterday to the sleek, modern designs of today, providing style and elegance to downtown areas, commercial
developments, parks and residential communities.
Applications
• Residential areas and walkways
• Shopping centers and malls
Housing
• Die-cast aluminum housing
Finish
• Powder coat paint finish
Ratings
/
• 1598 Listed Suitable for Wet Locations
• UL listed to Canadian National Standards and Codes
when polycarbonate refractor is used and “U” option
is chosen
Unique Features
• Hinged canopy
• Stainless steel catch to avoid hinge breakage
• Acrylic or polycarbonate refractors
• Integral ballast
• Mogul base socket – E39 standard (T10C vertical;
T10R horizontal – 15°)
• Plug-in ignitor
• No-tool PE receptacle
• Optional pendant mount (Contact factory)
Ordering Number Logic
Town and CountryTM (T10C & T10R)
_ _ _ _ - _ _ - _ - _ - _ - _ - _ - _ _ _ - _ _ - _
PROD. ID
T10C = Town and
Country
Luminaire with
vertical socket
T10R = Town and
Country
Luminaire with
horizontal
-15° socket
NOTE: UL Listed
and CSA certified
when Polycarbonate
refractor is used.
See “U” option.
WAT TAGE
05 = 50
07 = 70
10 = 100
15
= 150 (55V)
LIGHT
SOURCE
S = HPS
P = PMH
Standard:
Lamp not
included.
VOLTAGE PE FUNCTION
60Hz
0 = Multivolt HPS
Auto-Reg
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
7 = 120X240
8 = 240V Ballast
120V PE
Receptacle.
Not
reconnectable
C = 120x240 277
D = 347
F = 120X347
NOTE: Dual
voltage connected
for lower voltage
BALLAST
TYPE
See Ballast and
Photometric
Selection Table
A = Autoreg
G = Mag-Reg with
Grounded
Socket Shell
H = HPF Reactor
or Lag
M = Mag-Reg
N = NPF Reactor
or Lag
1 = None
2 = PE Receptacle
NOTE: Receptacles
connected same
voltage as unit except
as noted. Order PE
Control separately.
A = Acrylic
L = Polycarbonate
IES DISTRIBUTION
TYPE
See Ballast
and Photometric
Selection Table
SS4 = Short Semi-cutoff
Type IV
SS5 = Short Semi-cutoff
Type V
MS2 = Medium
Semi-cutoff
Type II
MS3 = Medium
Semi-cutoff
Type III
MS5 = Medium
Semi-cutoff
Type V
COLORREFRACTOR
BL = Black
(Standard)
DB = Dark
Bronze
GR = Gray
F = Fusing (Not available
with dual voltage)
J = Line Surge Protector,
Expulsion Type
(Not available for
UL Listed units)
L = Latch Canopy
T = Terminal Board
U = Listed
and CSA Certified
(Available with
polycarbonate
refractor only)
NOTE: Terminal
Board (T option)
Required for
UL Listing
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Light Multi- 347, PE R
Wattage Source volt 120 208 240 277 480 120X240 120X347 240/120 MS5 SS4 SS5 MS2 M SS4
50 HPS N/A H, N N/A N/A N/A N/A N/A H N/A 177505 N/A N/A 177502 177503 N/A
70, 100,
150 (55V) HPS A,H A,G,H,M,N A,G,H,M,N A ,G,H,M,N A,G,H,M,N A,G,M N/A H N/A 177505 N/A N/A 177502 177503 N/A
70** PMH H, N H, N H, N H, N H, N H, N H, N N/A H, N N/A N/A N/A 451463 N/A N/A
100** PMH H, N H, N H, N H, N H, N H, N H, N N/A H, N N/A N/A N/A 451462 N/A N/A
150** PMH N/A H, A H H, A H N/A H H H 454066 N/A N/A 451462 N/A N/A
NOTE: N/A = Not available.
**Medium Base Socket
Ballast Type/Voltage
60Hz
Photometric Curve Number 35T10C T10R
IES Distribution Type
OPTIONS
/
Product Dimensions
T10C T10R
•
Approximate Net Weight
•
Suggested Mounting Height
DATA
•
Effective Projected Area
: 10-16 lbs (5-7 kgs)
: 10-18 ft. (3-5 M)
: 1.6 sq ft. max (0.15 sq M max)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2968 (Rev. 06/18/12)
Loading...