GE SEMT Specification Sheet
SALEMTM TOP MOUNTED LAMP
APPLICATIONS
• Residential areas and walkways
• Shopping centers and malls
SPECIFICATION FEATURES
• / 1598 listed when
• Die Cast aluminum housing
• Cuto optics available
• Stainless steel catch to avoid hinge breakage
• Acrylic or Polycarbonate textured
ORDERING NUMBER LOGIC
SEMT
PRODUCT
IDENT
XXXX
SEMT = Salem
Luminaire
10
WAT TAGE
XX
05 = 50
07 = 70
10 = 100
15 = 150
S
LIGHT
SOURCE
X
S = HPS
P = PMH
T = INDUCTION
Polycarbonate refractor (TL) is used and “U”
option is chosen
1
VOLTAGE
X
0 = Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347
Multivolt
Factory Conn
277V
N
BALLAST
TYPE
X
See Ballast and
Photometric
Selection Table
A = Autoreg
H = HPF Reactor
or Lag
N = NPF Reactor
or Lag
E = Induction
Ballast
1
PE
FUNCTION
X
1 = None
2 = PE Re-
ceptacle
4 = Shorting
Cap
5 = PE recep-
tacle
with PE
control
TA
REFRACTOR
XX
TA = Textured
Acrylic
Refractor
TL = Textured
Lexan
Refractor
CA* = Clear
Acrylic
Side Panels
CL = Clear
Lexan Side
Panels
FG* = Flat
Glass Upper Lens
CG* = Clear
Glass Side
Panels
refractors, clear glass panels, or at
glass for cuto distributions
• Integral ballast in top of luminaire
• Top socket
• Stainless steel latch to secure canopy
• Terminal board standard
• Plug-in ignitor
• No-tool PE receptacle
• E39 Mogul base socket standard where
lamp is available in mogul base
(E26 Medium base socket otherwise)
• Powder coat paint nish
MS3
IES DISTRIBUTION
TYPE
XXX
S = Short
M = Medium
C = Cuto
S =Semi-cuto
2 = Type 2
3 = Type 3
5 = Type 5
BL
COLOR
XX
WH=White
BL=Black
DB=Dark
Bronze
GR=Gray
(ecoat
only)
AL=Aluminum
GN=Forest
Green
CG=Charcoal
Gray
XXX
OPTIONS
XXX
F = Fused
U = /
available only
with TL refractor (ballast in
bottom)
P = Prewire with 6’
of 14/3 cable
002 = Pendant
mount 1-1/4
NPSL
*NOTE: Flat glass lens is not available with 150W PMH.
Ballast for 150W PMH with other refractor options located in bottom.
A-60/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
FIXTURE DIMENSIONS
SEMT
3.000 in (76mm)
MAX DIA POLE OD
2.375 in. (60mm)
MIN DIA POLE OD
16.750 in.
SALEMTM TOP MOUNTED LAMP
27.250 in.
2.500 in. (64mm)
DATA SEMT
Approximate Net Weight 12-18 lbs 5-8 kgs
Suggested Mounting Height 10-18 ft. 3-5 M
EectiveProjectedArea 1.6sqftmax .15sqMmax
BALLAST AND PHOTOMETRIC SELECTION TABLE*
All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
60Hz
Light Multi- 120X 347, 240/120
Wattage Source volt 120 208 240 277 480 240 120X347 PE R
50 HPS N/A H, N N/A N/A N/A N/A N/A H N/A
70, 100,
150 (55V) HPS A ,H A,H,N A,H,N A,H,N A,H,N A N/A H N/A
**70,100 PMH H,N H,N H,N H, N H,N H,N H,N C/F H,N
**150 PMH N/A H H H H N/A H N/A H
100 IND E N/A N/A N/A N/A N/A N/A N/A N/A
NOTE: N/A = Not available.
*Also see Photometric Table on Page A-65.
** Medium Base Socket
GLOBE ACCESSORY
Globe-C FOR USE WITH SEMT WITH CLEAR SIDE PANELS
Globe-F FOR USE WITH SEMT WITH CLEAR FLAT GLASS UPPER LENS
GLOBE
(For use with
Cutoff Only)
REFERENCES
See Page A-64 for start of Accessories.
See Page A-68 for Explanation of Options and Other Terms Used.
See Page A-75 for Photometry
See Pole and Bracket Section Page P-2 for pole selection.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
2008/A-61
Loading...