GE Security Pro 500, 60-806, 60-806-95R, Security Pro 60-806 User Instructions
ZZZ*(,QWHUORJL[FRP
Part No:
60-806
T e s t S y s te m W e e k ly
A
B
C
Q u i c k E x it
D
p r e s s b o t h
p r e s s b o t h
p r e s s b o t h
O f f
N o D e la y
F e a t u r e s
S t a tu s
*
466-1667-PRO Rev A
October 2003
S t a y
2
S i le n t
5
S y s t e m
8
L ig h ts
0 #
B y p a s s
A w a y
3
6
M e n u
9
S y s t e m i s O K
1
4
7
Q u ic k G u id e
D is a r m S y s t e m / C a n c e l A la r m
P r es s 1 + C O D E .
A r m t o S T A Y
1
C l o s e a ll p ro te c te d d o o r s a n d w i n d o w s .
2
P r es s 2 + C O D E .
3
P r es s 4 t o a r m d e la y d o o r s i n st a n t ly ,
if d e si r ed .
A r m t o A W A Y
1
C l o s e a ll p ro te c te d d o o r s a n d w i n d o w s .
2
P r es s 3 + C O D E .
3
E x i t p r em is e s t h r o u g h d el a y d oo r .
Z o n e / S e n s o r N u m b e r
0 1
0 2
0 3
0 4
0 5
0 6
0 7
B y p as s S e n so rs
1
A r m s ys t e m t o d e s ir e d le v e l.
2
P r es s B Y P A S S + C O D E + S en so r N o .
T u r n C H I M E O n / O ff
1
M ak e su r e sy s t em i s d i s a rm ed .
2
P r es s 7 + 1 t o tu r n C H IM E o n o r o f f.
P r o g r a m U se r S e t t in g s
1
M ak e su r e sy s t em i s d i s a rm ed .
2
P r es s A o r B t o s c r o ll t h r o u g h m e n u s .
P r es s # t o s e le c t o p t i o n o r ac c e p t e n t r
P r es s to d e se l e ct o p t io n o r c a n c e l e n t ry .
P r es s 1 f o r O FF ; p r e s s 2 fo r O N ;
p r es s 0 - 9 fo r o th er e n t r ie s .
0 8
0 9
1 0
1 1
1 2
1 3
1 4
Security Pro
User Instructions
y .
™
T e st S y s te m W e e k l y
A
B
C
Q u ic k E x i t
D
p r e s s b o t h
p r e s s b o t h
p r e s s b o t h
O f f
N o D e la y
415
F e a tu r e s
7
S ta t u s
*
S ta y
2
S il e n t
S y s te m
8
L ig h t s
0 #
500
B y p a s s
A r m e d
R e a d y
A w a y
3
6
M e n u
9
FCC Notices
FCC Part 15 Information to the User
Changes or modifications not expressly approved by GE Interlogix can void the user’s authority to operate the equipment.
FCC Part 15 Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the affected equipment and the panel receiver to separate outlets, on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
ACTA Part 68
This equipment complies with Part 68 of the FCC Rules. Located on this equipment is a label that contains, among other information, the FCC registration number and the ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
FCC Part 68 Registration No. B4ZUSA-27621-AL-E REN: 0.2B
The REN is used to determine the maximum number of devices that may be connected to your telephone line. Excessive RENs on a telephone line may result in
devices not ringing in response to an incoming call. In most areas, the sum of all device RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the
REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements as adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compliant modular
jack that is also compliant. See the Installation Instructions for details.
Alarm dialing equipment must be able to seize the telephone line and place a call in an emergency situation. It must be able to do this even if other equipment
(telephone, answering system, computer modem, etc.) already has the telephone line in use. To do so, alarm dialing equipment must be connected to a properly
installed RJ31X jack that is electrically in series and ahead of all other equipment attached to the same telephone line. Proper installation is depicted in the following diagram. If you have any questions concerning these instructions, consult your local telephone company or a qualified installer about installing an RJ31X
jack and alarm dialing equipment for you.
C u s t o m e r P r e m i s e s E q u i p m e n t a n d W i r i n g
N e t w o r k
S e r v i c e
P r o v i d e r ' s
F a c i l i t i e s
R J 3 1 X
J a c k
R J - 1 1 J a c k
U n u s e d
A l a r m D i a l i n g
E q u i p m e n t
C o m p u t e r
T e l e p h o n e
L i n e
N e t w o r k
D e m a r c a t i o n
P o i n t
T e l e p h o n e
A n s w e r i n g
S y s t e m
F a x M a c
h i n e
T e l e p h o n e
T e l e p h o n e
U n u s e d
R J - 1 1 J a c k
If this equipment causes harm to the telephone network, the telephone company may temporarily disconnect your service. If possible, you will be notified in
advance. When advance notice is not practical, you will be notified as soon as possible. You will also be advised of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. You will be
given advance notice in order to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the company that installed the equipment for service and/or repair information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
Canada Notice
The Canadian Department of Communications label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
For your protection, make sure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are
connected together
Do not attempt to make connections yourself. Contact the appropriate electrician or electric inspections
!
Caution
The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device,
to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the LNs of all the
devices does not exceed 100. Load Number: .1 The term “IC:” before the certification/registration number only signifies that the Industry Canada technical
specifications were met. IC: 867A 787SIMON
“AVIS: - L ´étiquette du ministère des Communications du Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme a certaines normes de protection, d ´ exploitation et de sécurité des réseaux de télécommunications. Le ministère n ´ assure toutefois pas que le matériel fonctionnera
a la satisfaction de l ´ utilisateur.
Avant d ´ installer ce matériel, l ´ utilisateur doit s ´ assurer qu´ il est permis de le raccorder aux installations de l ´ enterprise locale de télécommunication. Le
matériel doit également etre installé en suivant une méthod acceptée de raccordement. Dans certains cas, les fils intérieurs de l´ enterprise utilisés pour un service
individuel a ligne unique peuvent etre prolongés au moyen d´ un dispositif homologué de raccordement (cordon prolongateur téléphonique interne). L ´ abonné
ne doit pas oublier qu ´ il est possible que la conformité aux conditions énoncées ci-dessus n ´ empechent pas le dégradation du service dans certaines situations.
Actuellement, les enterprises de télécommunication ne permettent pas que l ´ on raccorde leur matériel a des jacks d ´ abonné, sauf dans les cas précis prévus pas
les tarrifs particuliers de ces enterprises.
Les réparations de matériel homologué doivent etre effectuées pas un centre d ´ entretien canadien autorisé désigné par le fournisseur. La compagne de télécommunications peut demander a l ´ utilisateur de débrancher un appareil a la suite de réparations ou de modifications effectuées par l ´ utilisateur ou a cause de mauvais fonctionnement.
Pour sa propre protection, l ´ utilisateur doit s ´ assurer que tous les fils de mise a la terre de la source d ´ énergie électrique, des lignes téléphoniques et des
canalisations d ´´ eau métalliques, s ´ il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans les régions rurales.
Avertissment. - L ´ utilisateur ne doit pas tenter de faire ces raccordements lui-meme; il doit avoir recours a un service d ´ inspection des installations électriques,
ou a electricien, selon le cas”.
Une note explicative sur les indices de charge (voir 1.6) et leur emploi, a l ´ intention des utilisateurs du matériel terminal, doit etre incluse dans l ´ information
qui accompagne le materiel homologué. La note pourrait etre rédigée selon le modèle suivant:
“L ´ indice de charge (IC) assigné a chaque dispositif terminal indique, pour éviter toute surcharge, le pourcentage de la charge totale qui peut etre raccordée a un
circuit téléphonique bouclé utilisé par ce dispositif. La terminaison du circuit bouclé peut etre constituée de n ´ import somme des indices de charge de l ´ ensemble des dispositifs ne dépasse pas 100.”
L ´ Indice de charge de cet produit est ____________.
authority.
)
*(,QWHUORJL[6HFXULW\3URLVDWUDGHPDUNRI*(,QWHUORJL[$OORWKHUWUDGH
PDUNVDUHSURSHUWLHVRIWKHLURZQHUV
$OOULJKWVUHVHUYHG
*(,QWHUORJL[
6HFRQG6WUHHW1RUWK
1RUWK6DLQW3DXO01
Commands at a Glance
To do this: Press:
Disarm the system.
Disarm the system during
Entry Delay Time.
Cancel an accidental alarm. Code (or 1 + Code)
Arm to Level 2—STAY. 2 + Code
Arm to Level 3—AWAY. 3 + Code
Send a police alarm. Press and hold both POLICE
Send an auxiliary alarm. Press and hold both AUXILIARY
Send a fire alarm. Press and hold both FIRE
Arm system with No Delay.
1 + Code
Code (or 1 + Code)
buttons for 2 seconds.
buttons for 2 seconds.
buttons for 2 seconds.
2 + Code + 4 or
3 + Code + 4
Arm system to send a
Latchkey page.
Bypass a sensor. Indirectly: 2 + Code + ƒ or
2 + Code + 6 or
3 + Code + 6
3 + Code + ƒ
Directly: ƒ + Code + Sensor Number
Arm system silently.
5 + 2 + Code or
5 + 3 + Code
Check the system status.
Turn Chime on/off. 7 + 1
Check alarm memory. 7 + 6
Initiate a phone test. 8 + Code + 2
Initiate a sensor test. 8 + Code + 3
‚
Contents
Getting to Know Your Security System 1
Overview .....................................................................................................................................................1
Communicating with the Panel 2
Instructing the Panel ...................................................................................................................................2
How Your System Communicates with You ..............................................................................................2
Fire and Smoke Alarms 3
Clearing Smoke Sensors .............................................................................................................................3
What Happens When There is an Alarm ....................................................................................................3
Control Panel ..........................................................................................................................................1
Touchpads ...............................................................................................................................................1
Wireless Panic Button .............................................................................................................................1
Door/Window Sensors............................................................................................................................ 1
Motion Sensors .......................................................................................................................................2
Environmental Sensors ...........................................................................................................................2
Key Beeps ...............................................................................................................................................2
Status Beeps ............................................................................................................................................2
Pager Notification ...................................................................................................................................3
Indicator Lights .......................................................................................................................................3
Arming Your System 4
Level 1—OFF .............................................................................................................................................4
Arming Level 2—STAY .............................................................................................................................4
Arming Level 3—AWAY ............................................................................................................................4
Keychain Touchpad Arming 5
Quick Arm 5
Quick Exit 5
Using the Chime Feature 5
Preventing Accidental Alarms 5
Aborting Accidental Alarms .......................................................................................................................6
Guidelines for Preventing Accidental Alarms ............................................................................................6
Exit and Entry Delay Times 6
Exit Delay Example ................................................................................................................................6
Entry Delay Example ..............................................................................................................................7
Extended Delay ...........................................................................................................................................7
Exit Extension .............................................................................................................................................7
i
No Delay—For Instant Alarm ....................................................................................................................7
Auto STAY Arming Feature .......................................................................................................................8
Arming While a Door or Window is Open 8
Bypassing a Sensor Directly .......................................................................................................................8
Bypassing a Sensor Indirectly .....................................................................................................................9
Was the Bypass Successful? .......................................................................................................................9
Checking the Status of Your System 9
Short System Status ....................................................................................................................................9
Full System Status ....................................................................................................................................10
System Alarm Sounds ...............................................................................................................................10
Panic Alarms 10
Fire Panic ..................................................................................................................................................10
Police Panic Alarm ...................................................................................................................................10
Auxiliary Panic Alarm ..............................................................................................................................11
Siren Time-out ..........................................................................................................................................11
Access Codes 11
System Master Code ................................................................................................................................. 11
Regular User Codes ..................................................................................................................................11
Using the Programming Menus ................................................................................................................11
Programming Access Codes .....................................................................................................................11
Changing a User Code ..........................................................................................................................11
Erasing a User Code .............................................................................................................................12
Assigning the Direct Bypassing Attribute ............................................................................................12
The Touchpad Tamper Feature .............................................................................................................12
Setting the Time and Date 12
Adjusting System Sounds and Touchpad Brightness 13
Arming Your System Silently ...................................................................................................................13
Silent Arming on Demand ....................................................................................................................13
Arming Always Silent ..........................................................................................................................13
Adjusting the Touchpad Beeps .................................................................................................................13
Adjusting the Touchpad Display Brightness ............................................................................................14
Notification by Pager 14
Pager Messages .........................................................................................................................................15
Event Code in Page ...............................................................................................................................15
Sensor Number or User Number in Page ..............................................................................................15
Account Number in Page ......................................................................................................................16
Streamlining the Page ...............................................................................................................................16
Opening and Closing Reports 16
ii
Latchkey Paging 16
No Activity Feature 17
Using the Panel Download Feature 17
System Information 17
Testing the System 17
Automatic Test Features ...........................................................................................................................17
Manual Tests .............................................................................................................................................18
Sensor Test ............................................................................................................................................18
Phone Communication Test ..................................................................................................................18
Testing Sirens ........................................................................................................................................19
Troubleshooting 19
Trouble Beeps and Trouble Messages ......................................................................................................20
Silencing Trouble Beeps .......................................................................................................................20
Appendix A: User Sheets 21
Account Number .......................................................................................................................................21
System Sensors .........................................................................................................................................21
User Codes ................................................................................................................................................22
Touchpad Information ...............................................................................................................................23
Accidental Smoke and Fire Alarms ..........................................................................................................24
Dialer Abort ..............................................................................................................................................24
Arming Information ..................................................................................................................................24
Paging .......................................................................................................................................................25
If the Power Goes Out ..............................................................................................................................26
No Activity Time ......................................................................................................................................26
System Information ...................................................................................................................................26
Appendix B: Planning for Emergencies 26
Floor Plan Example ..................................................................................................................................26
Your Floor Plan .........................................................................................................................................27
Alarm System Limitations ....................................................................................................................28
If Your System Needs Service ..............................................................................................................29
Appendix C: Programming Your System 29
Two Methods to Program Your System ....................................................................................................29
Using Programming Menus ..................................................................................................................29
Examples of Programming Using Menus .............................................................................................30
Using Programming Shortcuts ..............................................................................................................32
Notes 33
iii
Getting to Know
Your Security
System
This manual describes how to operate your system. It describes basic arming and disarming com-
mands as well as how to program system features.
The dealer or installer may have already discussed the details of your system with you. Record
your system details in the User Sheets located in Appendix A.
Overview
Your security system is made up of different parts. Each plays a special role in the system’s oper-
ation:
St ay
Aw a y
Te st S ys tem W ee kly
O ff
3
A41
2
pre ss bo th
Si len t
Pa ge r
N o D e lay
5 6
B
pre ss bo th
Fe at ur es
Sy st em
M en u
8
C
7
9
pre ss bo th
St atu s
Li gh ts
Sy st em i s O K
Te st S yste m We ekl y
By pas s S ens ors
1
Arm sy stem to des ired lev el.
2
Pre ss B YP ASS + COD E + S enso r N o.
Tu rn CH IM E O n/O ff
1
Ma ke s ure syst em is d isarm ed .
2
Pre ss 7 + 1 to turn CH IM E o n o r of f.
Pro gr am Us er Set ting s
1
Ma ke s ure syst em is d isarm ed .
2
Pre ss A or B t o sc roll thro ugh me nus .
Pre ss # to sele ct o ptio n o r ac cept ent r
Pre ss to de sele ct o ptio n or can cel entr y.
Pre ss 1 for OF F; p res s 2 f or O N;
pre ss 0 - 9 for oth er e ntrie s.
08
09
10
11
12
13
14
Of f
1
pre ss both
No D el ay
BA4
y.
pre ss both
Fe atu re s
7
C
pre ss both
St atu s
D
*
Qu ick G uid e
Di sar m S yst em /Ca nc el A la rm
Pre ss 1 + C OD E.
Ar m t o S TA Y
1
2
3
Ar m t o A WA Y
1
2
3
Zo ne /Se nso r N um be r
01
02
03
04
05
06
07
Clo se a ll p rote cted do ors and win dow s.
Pre ss 2 + C OD E.
Pre ss 4 to arm del ay d oor s ins tan tly,
if d esir ed.
Clo se a ll p rote cted do ors and win dow s.
Pre ss 3 + C OD E.
Ex it pr emi ses thro ugh del ay d oor .
Touchpads
Door/Window Sensors
A rm ed
Re a dy
St ay
Aw ay
2 3
Si len t
Pa ge r
5
6
Sy ste m
M en u
8
9
Lig ht s
By pa ss
0 #
By p ass
D
0 #
*
Wireless Panic Button
Environmental Sensors
Panel
Motion Sensors
Control Panel
The panel is at the heart of your system. It stores the intelligence to monitor all the sensors and
devices in the system. The panel is the piece of equipment that activates sirens and initiates a call
to the central station in an alarm situation.
Touchpads
Touchpads are used to arm, disarm, and program your system.
The first touchpad is called a fixed display touchpad. It communicates by using indicator lights,
lighted text, and an 11-character display. The second touchpad is called an alphanumeric touch-
pad and communicates by displaying text on a two-line display.
Your system may also use wireless, handheld touchpads that can be carried from room to room.
Keychain touchpads are also wireless and are handy for simple arming and disarming functions.
Keychain touchpads can be carried off-site.
The installer can program the keychain touchpad to send a Police or Auxiliary panic alarm.
Wireless Panic Button
Wireless panic button touchpads are dedicated to sending one signal only—usually a Police or
Auxiliary panic alarm. Panic button touchpads are usually kept near the user.
Door/Window Sensors
Door and window sensors protect the perimeter of your home by alerting the panel when a door
or window is opened.
1
Security Pro 500
Motion Sensors
Motion Sensors in hallways or rooms detect a person moving across the field of detection.
Environmental Sensors
Environmental sensors such as gas, smoke, and heat detectors remain alert for the presence of
fire or carbon monoxide 24 hours a day.
Communicating
with the Panel
Your system can be set up to communicate with you through:
• Status beeps
• Alarm sirens
• Touchpad text
• Pager information
A s e n s o r i s a c t i v a t e d .
T h e s e n s o r a l e r t s t h e
p a n e l i m m e d i a t e l y .
T h e p a n e l a c t i v a t e s s i r e n s . I f t h e
s y s t e m i s m o n i t o r e d , t h e p a n e l
c a l l s t h e c e n t r a l m o n i t o r i n g s t a t i o n .
T h i s d e c i s i o n i s b a s e d o n s y s t e m
p r o g r a m m i n g a n d t h e c u r r e n t
a r m i n g l e v e l .
T h e c e n t r a l m o n i t o r i n g s t a t i o n
e r a t o r r e p o r t s t h e a l a r m t o
o p
t h e p o l i c e o r f i r e d e p a r t m e n t .
Instructing the Panel
Not just anyone can walk up to a touchpad and operate your security system. Before the system
will process most commands, users are required to enter a pre-programmed 4-digit access code.
See “Access Codes” for detailed information.
Keychain touchpads that are enrolled as part of the system do not require an access code, but are
usually kept in an individual’s pocket or purse.
If you would rather use an actual key to arm and disarm the system, your security dealer can
install a special key and keyswitch in your home.
Security Pro 500
How Your System Communicates with You
Touchpads and interior sirens produce a variety of operating beeps to inform you of different sys-
tem states and operations. The fixed display touchpad also uses indicator lights.
Key Beeps
A Key beep is the tone you hear when you press a button on a touchpad. The sound confirms that
the button was pressed adequately. Key beeps can be turned on or off by the installer.
Status Beeps
Status beeps from touchpads or sirens sound when there is a change in the current status of the
system. Status beeps are not alarms, but they do warrant your attention.
There is more than one type of Status beep:
• Exit Delay beeps indicate that an arming command has been entered and the countdown to
arming has begun.
• Entry Delay beeps indicate that you’ve entered the building and the countdown to an alarm
has begun. (So disarm the system as soon as you get in!)
• Trouble beeps tell you that there is a problem with the system or one of its components.
• Chime feature beeps tell you that a door was opened.
2
• Protest beeps inform you that you’re trying to arm the system while there is an open door or
window.
• Sensor test beeps are the sound the system makes during a sensor test to indicate that a sensor
was tested properly.
Status beeps are described in more detail throughout the manual.
Pager Notification
Your system can dial the phone numbers of three different pagers to notify users of events they
may want to be aware of. Some of the events include:
• when the system is disarmed,
• when the system is armed,
• trouble conditions in the system, and
• alarm conditions.
For more information, see “Notification by Pager.”
Indicator Lights
The fixed display touchpad used with Concord™ Express Systems includes ARMED and
READY indicator LEDs (light emitting diodes) that provide instant feedback.
ARMED
The red LED is the ARMED indicator. It will flash during the exit delay when you are arming the
system to level 2 (STAY) or level 3 (AWAY). It will also flash during the entry delay, before you
disarm your system.
The arming indicator will stop flashing
the system is armed.
The arming indicator will be off when the system is disarmed.
—but will remain on—when the exit delay expires and
Note
Any time you notice that the
ready light is not on, you
should press the STATUS
button to find out what the
trouble condition is.
Fire and Smoke
Alarms
Note
Your system may or may not
be monitored. If it is not
monitored, no call will be
made.
READY
The green LED is the READY indicator. It will be on whenever the system is functioning normally. The ready indicator shuts off if the system detects a trouble condition.
If your system contains smoke and fire sensors, it monitors the premises for smoke and fire
alarms 24 hours a day and in all arming levels.
These alarms cannot be cancelled or aborted and are always reported to the central station. Since
many communities charge for dispatching the fire department in error, your dealer may give you
specific instructions to follow in the event of an accidental smoke or fire alarm. Record these
instructions in the Appendix A User Sheets under “Accidental Smoke and Fire Alarms.”
Clearing Smoke Sensors
Once a smoke sensor has been in alarm, it is considered “Open” or in “Trouble” until it is reset:
•Press
1 + Code once to silence the alarm, then press 1 + Code again to reset the smoke
sensor.
What Happens When There is an Alarm
In the event of an alarm, several things happen at once:
• Sirens and hardwired touchpads emit emergency tones
• Panel notifies the central station for help.*
• Message appears on fixed display or alphanumeric touchpads.
3
Security Pro 500
Arming Your
System
Since your security needs may vary throughout the day, the system was designed with three arming levels. By arming your system to a particular level, only those sensors programmed to detect
in that arming level will report alarms.
Level 1—OFF
Use Level 1 when intrusion detection is not necessary. For example, on an active Saturday morning—kids playing inside and out; someone working in the garage; various house projects going
on.
Even though Level 1 disarms the system, your system continues to monitor for fire, smoke, carbon monoxide, and/or panic alarms if your system has these devices installed.
Here are some other situations in which you’d set the system to Level 1—OFF:
• Upon entering your armed home or business. When entering the armed premises through a
designated delay door, the entry delay time begins. Entry Delay beeps remind you to disarm
the system.
• Before opening a door or window while inside or outside the armed home or business. When
you wake up in the morning and want to get your newspaper, you must disarm the system
before opening the door to prevent an accidental alarm. (See the section on “Preventing Accidental Alarms” if you would like to be able to leave quickly when the system is armed.)
• To stop sirens and cancel an alarm. When an alarm condition occurs, disarming the system
turns off any sirens.
To disarm to Level 1—OFF using a touchpad:
¾
1. Press 1. Touchpads display “Enter Code.”
2. Enter your access code. Touchpads display date and time or programmed text.
3. The system sounds one long beep.
Arming Level 2—STAY
There are times when you want intrusion protection, but still want the freedom to move around
within your house without setting off an alarm. For example, in the evening when your family is
inside for the night. In this and similar situations, arm your system to 2—STAY.
To arm to Level 2—STAY using a touchpad:
¾
1. Close all protected perimeter doors and windows.
2. Press
3. Enter your access code. Touchpads display, “Armed to STAY.”
4. The system sounds two short beeps. ARMED indicators on fixed display touchpads will light
5. If leaving the premises, exit through a designated delay door immediately.
2 at any touchpad. Touchpads display, “Enter Code.”
(indicator will flash during the exit delay). The exit beeps begin.
Arming Level 3—AWAY
At other times, you want every sensor to be alert: When the family is away from home, or, in a
business, after closing time.
In this and similar situations, set your system to 3—AWAY for maximum protection. All sensors
are active—perimeter door and window sensors, and interior motion detectors.
¾
To arm to Level 3—AWAY using a touchpad:
1. Close all perimeter doors and windows.
2. Press
3. Enter your access code. Touchpads display, “Armed to AWAY.”
4. The system sounds three short beeps. ARMED indicators on fixed display touchpads will
5. Exit through a designated delay door immediately.
3 at any touchpad. Touchpads display, “Enter Code.”
light (indicator will flash during the exit delay). The exit beeps begin.
Security Pro 500
4
Keychain
Touchpad
Arming
To disarm your system with a keychain touchpad, press the Unlock button.
Your installer can set up your keychain touchpad to arm the system in one of two ways:
• Press the Lock button to arm the system directly to Level 3 with no Exit delay. Using this
method, you would not be able to arm to Level 2.
• Press the Lock button to increase the arming level each time it is pressed (Level 1 to Level 2,
or Level 2 to Level 3). The Exit delay time would be applied.
Note
Your system may be configured to sound short beeps on exterior sirens when arming or disarming the
system using a keychain or wireless touchpad. This gives confirmation that an arming change was successful even when outside. Ask your installer about this feature.
Quick Arm Your system may be set up so that you’re able to arm the system without using an access code.
To use Quick Arm:
¾
• Increase the arming level by simply pressing 2 or 3 at any touchpad.
• Decreasing the arming level requires that the user enter a code.
Quick Exit
Note
In UL Listed systems, this
feature is disabled.
Important !
If you step outside and are
planning to come back in, do
not close the door behind
you!
Note
Opening the door without
pressing
entry delay to begin.
D will cause the
Using the
Chime Feature
Your system may be set up so that when your system is armed to Level 2—STAY, you’re able to
D on any touchpad and simply walk out of the door without having to disarm and rearm
press
the system.
This is useful when your system is armed and you want to quickly pop outside to pick up the
newspaper without disarming your system.
¾ To use Quick Exit:
1. When the system is armed to 2—STAY, press D at any touchpad. You will begin to hear one
beep every five seconds. These beeps will continue throughout the 2 minute Quick Exit interval.
2. Open the door and go outside. Leave the door open if you are planning to come back in!
3. Come back in within two minutes and close the door. The system will rearm to 2—STAY.
Turning on the Chime feature is like having bells on every protected door and window. When this
feature is on, sirens and speakers sound 2 beeps whenever anyone opens a protected door or window.
The Chime feature works only in Level 1—OFF.
¾
To turn Chime on/off:
• While in Level 1—OFF, from any touchpad, press 7 + 1. While the Chime feature is on,
touchpads display, “CHIME IS ON” or “Chime.”
When the system is armed again, Chime becomes deactivated.
Chime-On-Close
The Chime-On-Close feature works like the regular Chime feature, but in addition to the double
beeps heard upon opening a protected door or window, the system sounds one long beep when
the door or window is closed again.
You can turn the Chime-On-Close feature on or off from the programming menu. Refer to
Appendix C, “Programming Menus” for information on programming your system.
Preventing
Accidental
Alarms
5
Your security system is engineered with advanced technology that reduces the chance of an accidental alarm caused by a technical problem. In wireless systems, this technology prevents other
devices, such as garage door openers, ham radios, television remote controls, and cellular
phones, from interfering with your security system.
Most accidental alarms occur when leaving the house after arming the system, or upon returning,
before disarming the system.
Security Pro 500
Loading...