GE SBC626 Data Sheet

Intelligent Platforms

SBC626

6U OpenVPX 4th Generation Intel® Core™ i7-based Single Board Computer

Features

• 6U OpenVPX single board computer

• 4th Generation Intel quad-core processors

• Two channels of soldered DDR3 SDRAM with ECC up to 32 GB

• Up to 32 GB solid state disk drive

• Up to 6 MB shared cache

• VITA65 OpenVPX Module Profile

- MOD6-PAY-4F1Q2U2T-12.2.1-8

- MOD6-PAY-4F1Q2U2T-12.2.1-13

• Data Plane Fabric

- 2x 10Gigabit Ethernet with RDMA or

- 2x DDR InfiniBand

• Expansion Plane Fabric

- Multiple PCIe (up to Gen3)

- 1 x16 link, 2 x8 links, 4 x4 links

• Control Plane Fabric

- 2x 10/100/1000BASE-BX (SERDES Ethernet)

- 2x 10/100/1000BASE-T

• Management Plane

- IPMI (Baseboard Management Controller)

• Rear I/O

- 2x COM ports

- 6x USB 2.0 ports [2 ports optionally upgradable to USB 3.0]

- Up to 3x SATA ports

- 8x GPIO lines

- VGA

- DVI / HDMI

- HD audio

Core™ i7

ports with RDMA

configurations

• Front I/O

- Up to 1x Gigabit Ethernet

- 1x COM

- Up to 2x USB (2.0 & 3.0) ports

- DisplayPort

- eSATA (shared with XMC/PMC site 2)

• On-board Expansion Sites

- 2x XMC - x8 PCIe Gen 3 capable

- 2x PMC - PCI-X 133 MHz

• Trusted Platform Monitor (TPM)

• Elapsed Time Indicator (ETI)

• Deployed Test Software

• Microsoft operating system support

• Five Levels of Ruggedization

The SBC626 Rugged Single Board Computer (SBC) features the high performance, highly integrated 4th Generation Intel Core i7 processor platform, which offers integrated graphics and ECC memory controllers plus quad-core processing up to 2.4 GHz all in one device (22 nm monolithic process).

Coupled with the Mobile Intel QM87 Express Chipset this provides an unmatched level of I/O bandwidth for both on-board and off-board functions.

Features of the 4th Gen. Core i7 processor

• 15% compute and up to 30% 3D performance improvement over 3rd Gen

• Advanced Vector Extensions (AVX) signal processing (new instructions)

• Intelligent performance on demand with Intel Turbo Boost Technology

• PCIe GEN 3 (8 GT/sec) and USB 3.0 (10x the bandwidth of 2.0) data transfer capability

Windows® / Linux® and real-time

• Hyper-Thread Technology – 2 threads per core

• OpenCL 1.2 support (up to 40 execution units)

In addition to a comprehensive range of onboard I/O features, the SBC626 also offers on-board XMC mezzanine expansion sites for enhanced system flexibility. Memory resources include up to 32 GB DDR3 SDRAM with ECC, and 32 GB onboard SSD (NAND Flash).

The SBC626 is designed to meet the requirements of a wide range of applications from industrial through to fully rugged defense and aerospace programs. It offers extended temperature capability and a range of air and conduction cooled build levels.

A rich software choice is planned for the SBC626, including comprehensive Deployed Test Software (FSP-enabled BIT, and BCS) plus operating system support for Microsoft Windows 7, Open Linux (Fedora), Red Hat Enterprise Linux, Wind River Linux, and VxWorks available for integrating ‘chain of trust’ operation (from power-up to application start), plus Wind River’s FSP-enabled VxWorks Boot Loader, into system scenarios.

Security Hub

The SBC626 includes an optional Security Hub FPGA. The FPGA combines a mix of passive and active features to allow customers to develop a robust on-board anti-tamper capability.

. Examples and assistance are also

SBC626 - 6U OpenVPX 4th Generation Intel Core i7-based Single Board Computer

XMC2/PMC IO

XMC1 / PMC IO

Front I/O (air cooled only)

Specifications

Processor

• Intel 4th Gen. Core i7 Processor, options include but are not limited to I7-4700EQ (Quad Core) @ 2.4 GHz (47W) (CPU speed is dependent on environment, consult manual for details)

• 22nm monolithic die processing technology

• Last Level Cache

- 6 MB (Quad Core i7)

SDRAM

• Maximum memory configuration of up to 32 GB DDR3 SDRAM @ 1333/1600 MHz with ECC

Solid State Disk Drive (on board NAND Flash)

• Up to 32 GB via SATA interface

USB Ports

• 6x USB 2.0 ports routed to P4/P6 [Up to 2 ports can be upgraded to USB 3.0, replacing 2 SATA ports]

• Up to 2x USB ports routed to front panel.

- 1x USB 2.0 port

- 1x USB 3.0 (optional) precludes use of XMC/PMC

site 2

OpenVPX Profile

• Module Profile: MOD6-PAY-4F1Q2U2T-12.2.1-8

• Module Profile: MOD6-PAY-4F1Q2U2T-12.2.1-13

Expansion Plane

• x16 PCIe, 2 x8 PCIe, or 4 x4 PCIe from a Gen3 capable switch to P2 (1 port non-transparent capable)

Data Plane

• 2x 10 Gigabit Ethernet

• 2x DDR Infiniband ports

Either routed to P1 with RDMA capability

Control Plane

• 2x 10/100/1000BASE-BX – routed to P4

• 2x 10/100/1000BASE-T – routed to P4

• 1x 10/100/1000BASE-T - routed to front panel (air-cooled only)

Management Plane

• IPMI (Baseboard Management Controller)

Serial Ports

• Three 16550 compatible serial ports

- COM1 routed to P3 RS-232/422

- COM2 routed to P4 RS-232/422

- COM3 routed to front panel RS-232/422

Serial ATA

• 2x SATA 3 capable (6 Gb/s), routed to P6

• 1x SATA 2 capable (3 Gb/s), routed to P6

• 1x eSATA port (optional) routed to front panel (precludes use of XMC / PMC site 2)

Audio

• High Definition Audio [routed to P5] with option for CODEC either on-board or on RTM

Video Controller

• 1x VGA port routed to P6

• 1x DVI/HDMI port routed to P6

• 1x DisplayPort routed to front panel

General Purpose I/O

• Up to 8x GPIO, 5V tolerant , each capable of generating an interrupt.

Block Diagram

USB

QM87

PCH

SATA

SSD

SATA

SSD

COM1 P3

FPGA

COM2 P4

LETNI

SATA

COM 2)

3.0

GigE (4)

Gig E

DisplayPort

Gig E

GPIO (4)

Gig E

USB (4)

Gig E

Quad Gig

Ethernet

PHY

Security

SATA (3)

DVI (1)

Hub

VGA (1)

USB

PCIe x1

VGA

XMC IO

MRAM

TPM

x4 Gen2

USB

LPC

USB

GPIO (P4/6)

COM3

USB

AUDIO

IPMI

PMC / XMC Expansion Slots

• Both sites (one routed to P3/P4, one to P5/P6)

- XMC - x8 PCIe Gen3

- PMC - PCI-X 133 MHz

LED

• 1x power

• 4x BIT status (software control)

SATA

GPIO (4)

Backup

SPI

Audio

HARD DRIVE option

USB (2)

eSATA

BIOS

BIOS /

BIT

SATA

XMC IO

SM-BUS

FDI

DMI

SATA

VGA

USB

COM 1

Factory EEPROM

USB

Optional front IO (precludes use of XMC/PMC site 2

eDP to

VGA

DVI 1

eDP

DisplayPort

eICP trop 46

8 16

x8 Gen3

2x10GE/

Infiniband

8/16 GB DDR3

x8 Gen3

Mux

P1 P4 P5 P6

INTEL

Gen i7 CPU

(4 cores)

x16 Gen3

XMC

PMC

Gen3

PCI-X

PCIe – PCI-X

Mux

Switch

1 x16/ 2 x8/ 4 x4/

NVRAM / Watchdog / ETI / TPM

• 512kB non-volatile RAM (FRAM)

• Watchdog timer (software programmable)

• Elapsed Time Indicator

• Temperature Sensors

• TPM (Trusted Platform Module)

• Baseboard Management Controller (IPMI)

Power Requirements

• +12V and +5V

PMC

XMC

PCIe –

PCI-X

Environmental

Level 1 Level 2 Level 3 Level 4 Level 5

Cooling Method Convection Convection Convection Conduction Conduction

Conformal Coating Optional Standard Standard Standard Standard

High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C

Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall

Random Vibration 0.002g2/Hz* 0.002g2/Hz* 0.04g2/Hz** 0.1g2/Hz** 0.1g2/Hz**

Shock 20g*** 20g*** 20g*** 40g*** 40g***

*With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz **From 10 to 1000 Hz ***Peak sawtooth 11 ms duration

Note: Processor performance and temperature are inter-dependent. For a given temperature, a maximum speed is achievable, and conversely for a given processor speed a maximum temperature is achievable. Consult the product manual for details

GE Intelligent Platforms Contact Information

Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at defense.ge-ip.com/contact

defense.ge-ip.com

©2014 GE Intelligent Platforms. All Rights Reserved. Intel is a registered trademark, and Core is a trademark, of Intel Corporation. Windows is a registered trademark of Microsoft Corporation. Linux is the registered trademark of Linus Torvalds. PCIe is a trademark of PCI-SIG. VxWorks is a registered trademark of Wind River Systems. Red Hat is a registered trademark of Red Hat, Inc. InfiniBand is a registered trademark and service mark of the InfiniBand Trade Association. All other brands or names are property of their respective holders. Specifications are subject to change without notice.

06.14 GFA-2021