GE PZS22MMKES, PZS22MSKSS Specification Sheet

PZS22MMK/MSK
H
I
E
D
G
F
FRONT VIEW TOP VIEW
GE Profile™ Series 22.1 Cu. Ft. Counter-Depth Side-by-Side Refrigerator
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Height to top of door (in.) A
Height to top of hinge (in.) B
Height to top of case (in.) C
Case depth without door (in.) D
Case depth less door handle (in.) E
Case depth with door handle (in.) F
OVERALL
Depth with fresh food door open 90° (in.) G
DIMENSIONS
Width (in.) H
Width with door open 90° inc. door handle (in.) I
Each side (in.)
Top (in.)
AIR
Back (in.)
69-7/8
69-1/4
69
24-1/8
28-1/2
30-3/4
46-1/4
35-3/4
43-1/4
1/8
1
2
A
B C
D
E
I
H
F
G
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Listed by Underwriters Laboratories
Speci fication Revise d 4/16
PZS22MMK/MSK
ELECTRICAL
WATER
25"
COUNTER TOP
ELECTRICAL WATER
3/4" AIRSPACE (1/2" GAP + 1/4" WALL PLATES)
3/4" AIRSPACE (1/2" GAP + 1/4" WALL PLATES)
24"
CABINET
ELECTRICAL
WATER
ELECTRICAL WATER
24"
CABINET
25"
COUNTER TOP
25"
COUNTER TOP
3/4" AIRSPACE (1/2" GAP + 1/4" WALL PLATES)
3/4" AIRSPACE (1/2" GAP + 1/4" WALL PLATES)
24"
CABINET
24"
CABINET
FOR 21 CUBIC FOOT MODELS
FOR 24 CUBIC FOOT MODELS
Fig 2A eps
25"
COUNTER TOP
TRIM
TRIM
GE Profile™ Series 22.1 Cu. Ft. Counter-Depth Side-by-Side Refrigerator
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
INSTALLATION TIPS TO MAXIMIZE THE BUILT-IN LOOK
All wall/floor molding should be removed prior to installation.
Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended.
When possible, recess both copper water line and electrical outlet. (See local codes)
Front and rear leveling legs are adjustable for the built-in look. (See owner’s manual)
12"
SOFFIT
8' CEILING
13" to 14"
CABINET
70"* 23 CU. FT. MODELS
72-1/2"* 25 CU. FT. MODELS
24-1/2"
36-1/8"
* The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening
(or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Listed by Underwriters Laboratories
Speci fication Revise d 4/16
Loading...
+ 1 hidden pages