GE Profile PP942, Profile PP942TMWW, Profile PP942BMBB Dimensions And Installation Information

Dimensions and Installation Information (in inches)

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,

800.626.2000.

220589

Listed by
Underwriters
Laboratories

3-1/4*

Cooktop

2-1/2**

Required

28-1/2

19-5/8

29-3/4

21-3/8

Electrical junction box 16" MIN.
below countertop

30" MIN. to
unprotected
cabinet

Cut should
not interfere
with cabinet
structure
at front

1-1/2" MIN.

clearance to

side wall

from cut-out

1-1/2" MIN.

clearance to

side wall

from cut-out

1-3/4" to
rear wall

13" MAX.
depth

* Depth of unit at conduit connection location (rear) is

6-1/2" on models PP980/950 and 4-5/8" on models
PP975/972/962/945/942/932/912, JP655/356/346.

**Raised bull nose countertops may require up to

3/8" additional clearance to prevent interference
with curved front.

15" MIN.
to cabinet

†

Note: Check local codes for required breaker size

Important: Requires a 5” free area between

the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15” minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48” flexible armored cable.

Note: 30” Ribbon cooktops are approved for use over select GE 30” Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed
with product before installing.

Cooktop gas/electric supply may need to be

re-routed to install downdraft.

The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install. Before installing, consult installation

instructions packed with product for current dimensional data.

KW Rating

240V

7.8

208V

5.9

Breaker Size

240V

40 Amps

†

208V

30 Amps

†

PP942TM/BM

GE Profile™ 30" Built-In CleanDesign Electric Cooktop

Specification Created 10/06

Features and Benefits

• Ceramic Glass Cooktop - A smooth cooktop surface makes cleaning
quick and easy

• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times

• 12"/9"/6" Tri-Ring Element - Accommodates various-sized pots or
pans for the ultimate in cooking versatility

• PowerBoil

™

Element - Provides up to 3,000 watts of power to speed

the boiling process

• Frameless Design - A smooth and seamless cooktop surface makes
cleaning quick and easy

• Dishwasher-Safe Knobs - Feature a robust construction for safe and
easy cleaning

• Control Lock Capability - Provides the ability to lock controls, helping
protect from unintentional activation

• Melt Setting - Optimized for melting chocolate, this setting delivers
the low gentle heat needed

• Model PP942TMWW - True white

• Model PP942BMBB - Black on black

PP942TM/BM

GE Profile™ 30" Built-In CleanDesign Electric Cooktop

220589

Specification Created 10/06