GE Profile PP9036DJ Dimensions And Installation Information

For answers to your Mon ogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.

PP9036DJ

GE Profile

™

Series 36" Built-In Touch Control Cooktop

Specif ication Revis ed 6/16

To insure accuracy, it is best to make a
template when cutting the opening in the counter

Electrical junction box 16" MIN.

below countertop

Cooktop

36"

20-3/8"

18-7/8"

33-3/4"

19-1/8" to

19-1/4"

33-7/8"

to 34"

CP9536SJ, PP9036DJ,

PP7036DJ, JP5036DJ

2-1/2" MIN.

Required

1-3/4" MIN.

to rear wall

13" MAX. depth of unprotected

overhead cabinets (when no
hood or microwave is installed)

15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop

3-1/4" at front of unit and
5-9/16" at conduit location

30" MIN. from countertop to

unprotected cabinet (when
no hood or microwave is
installed)

2" MIN. clearance

to side wall from cut-out

on both sides of cooktop

See label next

to nameplate for

MIN. clearance

to wall

IMPORTANT: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.

NOTE: 36" Ribbon cooktops are approved for
use over select GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional
data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing. Cooktop gas/
electric supply may need to be re-routed to
install downdraft. The countertop cutout
requires 23-1/2" minimum flat countertop
surface and 25" minimum total countertop
depth. In addition, other clearances to front
edge of the countertop must be considered.

Before installing, consult installation
instructions packed with product for
current dimensional data.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

APPROXIMATE COOKING DIMENSIONS

Listed by
Underwriters
Laboratories

ADA

COMPLIANT

VOLTAGE (60H Z AC) 240V

208V

CONNECTED LOAD (MA X.) 9.6 kW

7.2 kW

CURRE NT DRAW (MAX.) 40.0 Am ps 34.7 Amps
RECOMMENDED CIRCUIT BREAKER†40 Amps 40 Amps

†

NOTE: Check local codes for required breaker size.

PP9036DJ

GE Profile

™

Series 36" Built-In Touch Control Cooktop

Specif ication Revis ed 6/16

FEATURES AND BENEFIT
Five radiant cooking elements - Cook foods quickly and evenly on this sleek,
glass surface

Glide touch controls - Precisely control heat instantly and easily with one
swipe

6"/9"/12" tri-ring element - Use different pan sizes on this single, 3,000-watt
flexible element

5"/8" Power Boil element - Use different pan sizes on this single, 2,400-watt
flexible element that produces rapid powerful heat

SyncBurners - Control two 7" elements simultaneously to evenly heat large
cookware or griddles*

Multi-element timer - Manage up to five pans at once with individual ti mers
for each element

Control lock capability - Protects against unintended activation

Custom Settings - Personalize your cooktop settings to fit your cooking style

Red LED display with beveled black glass surface - Achieve a premium look
that complements the entire kitchen

Hot surface indicator lights - Know when elements are too hot
to touch with a quick glance

Model PP9036DJBB - Black on black

* OPTIONAL STAINLESS STEEL CLAD

ALUMINUM GRIDDLE

Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part number
JXGRIDL1 from your GE Dealer.

GUARANTEED FIT
Replacing a similar cooktop from GE or another
brand? GE cooktops are guaranteed for an exact f it
to make replacement easy

Visit geappliances.com for more info