GE Profile PFIC1NFY, Profile PFIC1NFYWV, Profile PFIC1NFYBV Dimensions And Installation Information
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimensions and Installation Information (in inches)
Specification Created 3/09
210811
Overall
Dimensions
Height to top of hinge (in.) A 69-5/8
Height to top of case (in.) B 69
Case depth without door (in.) C 23-7/8
Case depth less door handle (in.) D 26-3/4*
Case depth with door handle (in.) E 31
Depth with fresh food door open 90° (in.) F 43-1/8
Width (in.) G 35-3/4
Width with door open 90° inc. door handle (in.) H 40-7/8
Air
Clearances
Each side (in.)
1/8
Top (in.)
1
Back (in.)
1/2
94" French Door Bottom Freezer Refer
A
Front View
Top View
G
D
C
F
B
E
H
PFIC1NFY
GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Listed by
Underwriters
Laboratories
Note:
Anti-tip bracket part number 200D8494P001 will be shipped with
every counter-depth model
*Does NOT include a decorative panel
IMPORTANT: Before finalizing specifications
for your GE Profile counter-depth refrigerator,
please NOTE:
• A minimum width of 36" is required for
refrigerator installation
• Be sure to allow for 1/2" or 3/4" side panels
in addition to the 36" minimum
Installation of water outlets
Alternate
water
line location
through floor
1/2"
Recommended water line
location using recess
in rear wall
Recommended single loop
of 1/4" pex water line
Water hook-up
on the refrigerator
Rear Wall View
Top View
18"
24"
Allow 48" minimum water
line to enable refrigerator
to be pulled forward
Alternate
water
line location
through floor
1/2"
Top View
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimensions and Installation Information (in inches)
PFIC1NFY
GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Listed by
Underwriters
Laboratories
Order your own custom wood panels to match cabinetry or other decor.
Panels up to 1/4" thick or panels with 1/4" thick flanges will fit into your new
counter-depth refrigerator. Follow these patterns to ensure they will fit securely.
Add filler behind panels (see below) to ensure they will not rattle.
Weight Limits: Total weight of panels—Fresh Food = 10 lbs. each, Freezer = 18
lbs. max.
Note: Panels up to 3/4" will require special routing area around handles.
Dimensions may vary depending on depth of panel.
2" Clearance
Handle Side
Appearance
Panel
Refrigerator
Door
1/4" Thick Backing
3/4
Panels thicker than 1/4"
1/4" max.
3/4
5/16
Right Fresh Food Door
Freezer Door
16-29/32
5/16"
minimum at
1/4"
thickness
Top, right and
bottom
Top, right and
bottom
5/16"
minimum at
1/4"
thickness
2"
minimum at
1/4"
thickness
2"
minimum at
1/4"
thickness
Handle sideHandle side
26-3/32
2" minimum at
1/4" thickness
Handle side
Left, right and
bottom sides
5/16" minimum
at 1/4" thickness
35-29/32
38-15/16
Left Fresh Food Door
16-29/32
Raised portion
of panel
Raised portion
of panel
Raised
portion
of panel
38-15/16
1/8
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/8
1/4
Dimensions for custom wood panels
Freezer Door
2-1/2
3/4
3/4
Filler
2-1/2
3/4
Panel
Right Fresh Food Door
Filler
2-1/2
3/4
3/4
Panel
Left Fresh Food Door
Filler
2-1/2
3/4
3/4
Panel
Right Fresh Food Door
Filler
2-1/2
3/4
3/4
Panel
Right Fresh Food Door
Filler
2-1/2
3/4
3/4
Panel
Panels less than 1/4" thick
Specification Created 3/09
210811
Loading...