GE Portable Dishwasher Installation Instructions
GE Consumer & Industrial
Appliances
Dishwasher
imagination at work
– Be sure to leave these instructions for the
– Keep these instructions with your
– Installation of this dishwasher requires
STOP
Your dishwasher circuit should not be
If the wall receptacle you plug the
If the wall receptacle you plug the
WARNING
Insure proper ground
exists before use
– Do not kick off wood base! Damage
A sink spray attachment hose can burst if it is
■
■
WARNING
WARNING
– Place the unicouple completely over the faucet adapter
– Release the locking collar. The unicouple should now be
locked onto the faucet adapter.
The unicouple’s small hose carries water from the
■
Open door and remove all foam and paper packaging.
Open door and remove all foam and paper packaging.
Locate the Owner’s Manual.
Read the Owner’s Manual to familiarize yourself with the
Read the Owner’s Manual to familiarize yourself with the
Remove the protective film, if present, from the control
Remove the protective film, if present, from the control
Add 2 quarts of water to the bottom of the dishwasher to
Add 2 quarts of water to the bottom of the dishwasher to
Dial Models
– On dial models, make sure you did not turn the dial past the
– On electronic models, make sure the start pad was pressed
Flood Float
Cover
Collar
■
■
■
■
Loading...