PGP986SET
GE Profile™ Series 36" Built-In Gas Cooktop
Dimensions and Installation Information
AGA Requirement: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.
Note: If installing with a GE ProfileTM Telescopic
Downdraft System, consult both cooktop and
downdraft installation instructions packed with
product before installing. Cooktop gas/electric
supply may need to be re-routed to install
downdraft.
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select
GE 27" and 30" Wall Ovens and Warming Drawers.
30" and 36" Gas cooktops are approved for use
over 30" Wall Ovens and Warming Drawers.
Refer to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data.
Installation Information: Before installing, consult
installation
current dimensional data.
instructions, packed with product, for
For answers to your Monogram® or GE® appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
Specification Revised 3/13
230240
PGP986SET
GE Profile™ Series 36" Built-In Gas Cooktop
Features and Benefits
• Deep-recessed cooktop - Deep-recessed cooktop contains spills in one
area that’s easy to wipe clean
• Sealed cooktop burners - Burner elements are sealed to the cooktop
to keep foods and liquid contained on the cooktop, making
cleaning painless
• 20,000 BTU tri-ring burner - Three-in-one burner is designed for
accelerated boiling and gentle simmering
• Precise Simmer burner - Allows for low, even heat distribution that is
ideal delicate foods and sauces
• Matte Black Heavy-Cast Grates - Premium cast-iron offers superior
performance
• LED backlit knobs - Sleek LED backlit knobs indicate when burners are on
• Dishwasher-Safe Grates and Knobs - Feature durable construction for
worry-free, effortless cleaning and maintenance
• Model PGP986SETSS - Stainless steel
Specification Revised 3/13
230240