GE PGP943SETSS User Manual

PGP943SET

GE Profile™ Series 30" Built-In Gas Cooktop

Dimensions and Installation Information

AGA Requirement: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.

Note: If installing with a GE Profile™ Telescopic
Downdraft System, consult both cooktop and
downdraft installation instructions packed with
product before installing. Cooktop gas/electric
supply may need to be re-routed to install
downdraft.

Electrical Rating: 120V, 60Hz, 5A

Installation With Single Wall Oven Information:

30" Gas Cooktops are approved for use over select
GE 27" and 30" Wall Ovens and Warming Drawers.
30" and 36" Gas cooktops are approved for use
over 30" Wall Ovens and Warming Drawers.
Refer to cooktop and wall oven/warming drawer
installation instructions packed with product for
current dimensional data.

Installation Information: Before installing, consult
installation
current dimensional data.

instructions, packed with product, for

For answers to your Monogram® or GE® appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.

Specification Revised 3/13

230248

PGP943SET

GE Profile™ Series 30" Built-In Gas Cooktop

Features and Benefits

• Deep-recessed cooktop - Deep-recessed cooktop contains spills in one
area that’s easy to wipe clean

• Sealed cooktop burners - Burner elements are sealed to the cooktop
to keep foods and liquid contained on the cooktop, making cleaning
painless

• Power Boil 15,000 BTU burner - This powerful element instantly supplies
the intense heat need for boiling, sautéing and stir frying

• Precise Simmer burner - Allows for low, even heat distribution that is
ideal for delicate foods and sauces

• Matte Deluxe-Cast Grates - Durable cast-iron offers lasting performance

• Dishwasher-Safe Grates and Knobs - Feature durable construction for
worry-free, effortless cleaning and maintenance

• Model PGP943SETSS - Stainless steel

Specification Revised 3/13

230248