GE PCF25NGW User Manual

"94 SxS Refer
A
Top View
G
D
C
F
B
E
H
PCF25NGW
GE Profile™ Counter-Depth 24.6 Cu. Ft. Side-By-Side Refrigerator with Integrated Dispenser
Dimensions and Installation Information (in inches)
Height to top of hinge (in.) A 72
Height to top of case (in.)
Case depth without door (in.)
Case depth less door handle (in.)
Case depth with door handle (in.)
Overall
Dimensions
Depth with fresh food door open 90° (in.)
Width (in.)
Width with door open 90° inc. door handle (in.)
Each side (in.)
Top (in.)
Air
Clearances
Back (in.)
† Water hook-up fits in back air clearance when calculating
installation depth.
If installed against a wall, allow clearance of 13-15/16" on freezer side to remove bin.
Clearance required to remove fresh food full-size pan without disassembling is 18-5/8".
Allow additional space for any necessary leveling adjustments.
G 35-3/4
B 71-1/2
C
D
E
F
23-7/8
27-1/8
29-9/16
H 38-3/16
46
1/8
1
1/2
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,
800.626.2000.
Listed by Underwriters Laboratories
Specification Created 4/07
210218
25" Counter Top
ElectricalWater
3/4" Airspace (1/2" Gap + 1/4" Wall Plates)
24" Cabinet
25" Counter Top
Electrical Water
3/4" Airspace (1/2" Gap + 1/4" Wall Plates)
24" Cabinet
25" Counter Top
ElectricalWater
Trim
3/4" Airspace (1/2" Gap + 1/4" Wall Plates)
24" Cabinet
25" Counter Top
Electrical Water
Trim
3/4" Airspace (1/2" Gap + 1/4" Wall Plates)
24" Cabinet
FOR 21 CUBIC FOOT MODELS
FOR 24 CUBIC FOOT MODELS
8' Ceiling
13" to 14" Cabinet
12" Soffit
36-1/8"
24-1/2"
70-1/4"* 23 cu. ft. models
72-1/4"* 25 cu. ft. models
PCF25NGW
GE Profile™ Counter-Depth 24.6 Cu. Ft. Side-By-Side Refrigerator with Integrated Dispenser
Rough-In Dimensions and Installation Information (in inches)
Installation Tips to Maximize the Built-In Look
• All wall/floor molding should be removed prior to installation.
• Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended.
• When possible, recess both copper water line and electrical outlet. (See local codes)
• Front and rear leveling legs are adjustable for the built-in look. (See owner’s manual)
**The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to height of opening for 23 cu. ft. models and 1/8" (72-3/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 4/07
Listed by Underwriters Laboratories
210218
Loading...
+ 1 hidden pages