GEAppliances.com
m
|
O
k...
a
%3
|
CD
mm
m
lm
4..a
|
CD
L_
LL
Safety Information ............ 2
Warranty ....................... 7
Assistance / Accessories ..... 8
Using The Range
Surface Units ..................... 9
Cookware for Radiant
Glass Cooktop ................. 12
Oven Controls ................... 14
Special Features ................ 16
Oven Racks ..................... 17
Aluminum Foil and Oven Liners.. 18
Cookware ....................... 18
Cooking Modes ................. 18
Cooking Guide .................. 20
Warming Drawer ................ 21
Probe ........................... 21
Care and Cleaning
Cleaning the Range- Exterior ... 22
Cleaning the Range - Interior .... 23
Cleaning the Glass Cooktop ...... 24
Maintenance .................... 25
Troubleshooting Tips ....... 29
JB740 - 30" Free-Standing Range
JB745 - 30" Free-Standing Range
JB750 - 30" Free-Standing Range
PB930 - 30" Free-Standing Range
JD750 - 30" Drop-In Range
JS750 - 30" Slide-In Range
For a Spanish version of this
manual, visit our Website at
GEApp/iances.com.
Para consu/tar una version
en espaho/ de este manual
de instrucciones, visite
nuestro sitio de internet
GEApp/iances.com.
Printed in the United States 49-80690-4 10-14 GE
Write the model and serial
numbers here:
Model #
Serial #
You can find them on a label
behind the door or drawer.
Printed on
Recycled Paper
Z
©
m
tY
©
LL
Z
m
>.,
t.-,
I,L!
<
IMPORTANT SAFETYINFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
iA WARNING j
Read all safety instructions before using the product. Failure to follow these instructions may result in fire,
electrical shock, serious injury or death.
ANTI-TIPDEVICE
To reduce the risk of tipping the range, the
range must be secured by a properly installed
Tl_o-OverHazard
A child or adult can tip the range and be killed,
Verify the anti-tip bracket has been properly installed
and engaged,
Ensurethe anti-tip bracket is re-engaged when the range
is moved,
Do not operate the range without the anti-tip bracket in
place and engaged.
Failure to follow these instructions can result in death or
serious burns to children or adults.
anti-tip bracket. See installation instructions
shipped with the bracket for complete details
before attempting to install.
For Free-Standing and Slide-In Ranges
To check if the bracket is installed and engaged
properly, look underneath the range to see that
the rear leveling leg is engaged in the bracket.
On some models, the storage drawer or kick panel can be removed
for easy inspection. If visual inspection is not possible, slide the
Anti-Tip _,,. _..]
Bracket iii I
range forward, confirm the anti4ip bracket is securely attached to
the floor or wall, and slide the range back so the rear leveling leg is
under the anti-tip bracket.
Leveling Leg __"
If the range is pulled from the wall for any reason, always repeat
this procedure to verify the range is properly secured by the anti-tip
bracket.
Free-Standing and Slide-In Ranges
Never completely remove the leveling legs or the range will not be
secured to the anti-tip device properly.
For Drop-In Ranges
To check if the bracket is installed and engaged properly, slide the range
forward, confirm the anti-tip bracket is securely attached to the rear of
the range, and slide the range back so that the anti-tip bracket slides just
under the countertop or wood block attached to the rear wall.
Anti-Tip_--_- , _ ,
Bracket , _: '
If you did not receive an anti-tip bracket with your purchase,
call 1.800.626.8774 to receive one at no cost (in Canada, call
1.800.561.3344). For installation instructions of the bracket, visit
GEAppliances.com (in Canada, GEAppliances.ca).
Dropdn Ranges
STATEOF CALIFORNIA PROPOSITION65 WARNING
Countertop or
///
///
///
///
///
i Wood Block
///
Oven # _,
///
z'//
///
///
///
>_-.0
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to
publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm,
and requires businesses to warn customers of potential exposure to such substances.
I_WARNING JThisproductcontainsoneormorechemicalknowntotheStateofCaliforniato
cause cancer, birth defects or other reproductive harm.
Self-clean ovens can cause low-level exposure to some of these substances, including carbon monoxide,
during the cleaning cycle. Exposure can be minimized by venting with an open window or using a
ventilation fan or hood.
SAVETHESEINSTRUCTIONS
49 80690 4
JAWARNING 1GENERALSAFETYINSTRUCTIONS
[] Use this appliance only for its intended purpose
as described in this Owner's Manual.
[] Be sure your appliance is properly installed and
grounded by a qualified installer in accordance
with the provided installation instructions.
[] Do not attempt to repair or replace any part of
your range unless it is specifically recommended
in this manual. All other servicing should be
transferred to a qualified technician.
[] Before performing any service, unplug the range
or disconnect the power supply at the household
distribution panel by removing the fuse or
switching off the circuit breaker.
[] Do not leave children alone--children should
not be left alone or unattended in an area where
an appliance is in use. They should never be
allowed to climb, sit or stand on any part of the
appliance.
[] A,CAUTI©N. Donotstoreitemsof
interest to children above a range or on the
backguard of a range--children climbing on the
range to reach items could be seriously injured.
[] Use only dry pot holders--moist or damp pot
holders on hot surfaces may result in burns from
steam. Do not let pot holders touch hot surface
units or heating elements. Do not use a towel or
other bulky cloth in place of pot holders.
[] Never use your appliance for warming or heating
the room.
[] Do not touch the surface units, the heating
elements or the interior surface of the oven.
These surfaces may be hot enough to burn
even though they are dark in color. During and
after use, do not touch, or let clothing or other
flammable materials contact the surface units,
areas nearby the surface units or any interior
area of the oven; allow sufficient time for cooling
first. Other surfaces of the appliance may
become hot enough to cause burns. Potentially
hot surfaces include the cooktop, areas facing
the cooktop, oven vent opening, surfaces near
the opening and crevices around the oven door.
[] Do not heat unopened food containers. Pressure
could build up and the container could burst,
causing an injury.
[] Do not use any type of foil or liner to cover the
oven bottom or anywhere in the oven, except as
described in this manual. Oven liners can trap
heat or melt, resulting in damage to the product
and risk of shock, smoke or fire.
[] Avoid scratching or impacting glass doors, cook
tops or control panels. Doing so may lead to
glass breakage. Do not cook on a product with
broken glass. Shock, fire or cuts may occur.
[] Cook meat and poultry thoroughly--meat to
at least an internal temperature of 160°F and
poultry to at least an internal temperature of
180°F. Cooking to these temperatures usually
protects against foodborne illness.
I"rl
-4
..<
m
Z
©
;X3
n
©
Z
L- iAWARNING i KEEPFLAMMABLEMATERIALSAWAYFROMTHERANGE
[] Do not store or use flammable materials in
an oven or near the cooktop, including paper,
plastic, pot holders, linens, wall coverings,
curtains, drapes and gasoline or other flammable
vapors and liquids.
[] Never wear loose-fitting or hanging garments while
using the appliance. These garments may ignite if
they contact hot surfaces causing severe burns.
I
Failure to do so may result in fire or personal injury.
[] Do not let cooking grease or other flammable
materials accumulate in or near the range.
Grease in the oven or on the cooktop may ignite.
[] Clean ventilating hoods frequently. Grease
should not be allowed to accumulate on the hood
or filter.
SAVETHESEINSTRUCTIONS
49 80690 4 3
Z
©
m
IMPORTANT SAFETYINFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
tY
©
EL
Z
m
t--,
oO
,-=JAWARNING i IN THE EVENTOFA FIRE,TAKE THE FOLLOWING
J
STEPSTO PREVENTINJURYAND FIRESPREADING
[] Do not use water on grease fires. Never pick up
a flaming pan. Turn the controls off. Smother a
flaming pan on a surface unit by covering the
pan completely with a well-fitting lid, cookie sheet
or flat tray. Use a multi-purpose dry chemical or
foam-type fire extinguisher.
[] If there is a fire in the oven during baking,
smother the fire by closing the oven door and
turning the oven off or by using a multi-purpose
dry chemical or foam-type fire extinguisher.
[]
If there is a fire in the oven during self-clean, turn
the oven off and wait for the fire to go out. Do
not force the door open. Introduction of fresh air
at self-clean temperatures may lead to a burst
of flame from the oven. Failure to follow this
instruction may result in severe burns.
[A WARNING i COOKTOP SAFETYINSTRUCTIONS
Never leave the surface units unattended at
[]
medium or high heat settings. Boilovers cause
smoking and greasy spillovers that may catch
on fire.
[] Never leave oil unattended while frying. If allowed
to heat beyond its smoking point, oil may ignite
resulting in fire that may spread to surrounding
cabinets. Use a deep fat thermometer whenever
possible to monitor oil temperature.
[] To avoid oil spillover and fire, use a minimum
amount of oil when shallow pan-frying and
avoid cooking frozen foods with excessive
amounts of ice.
[]
Use proper pan size--select cookware having
flat bottoms large enough to cover the surface
heating element. The use of undersized
cookware will expose a portion of the surface
unit to direct contact and may result in ignition
of clothing. Proper relationship of cookware to
surface unit will also improve efficiency.
[] Only certain types of glass, glass/ceramic,
earthenware or other glazed containers are
suitable for cooktop service; others may break
because of the sudden change in temperature.
[] To minimize the possibility of burns, ignition of
flammable materials and spillage, the handle of a
container should be turned toward the center of
the range without extending over nearby surface
units.
[]
When preparing flaming foods under a hood, turn
the fan on.
[]
If power is lost to an electric cooktop while a
surface unit is ON, the surface unit will turn back
on as soon as power is restored. In the event of
power loss, failure to turn all surface unit knobs
to the OFF position may result in ignition of items
on or near the cooktop, leading to serious injury
or death.
SAVETHESEINSTRUCTIONS
49 80690 4
IA WARNING1RADIANT COOKTOP SAFETYINSTRUCTIONS
[] Use care when touching the cooktop° The glass
surface of the cooktop will retain heat after the
controls have been turned off.
[] Do not cook on a broken cooktop. If glass
cooktop should break, cleaning solutions and
spillovers may penetrate the broken cooktop and
create a risk of electric shock. Contact a qualified
technician immediately.
[] Avoid scratching the glass cooktop. The cooktop
can be scratched with items such as knives,
sharp instruments, rings or other jewelry, and
rivets on clothing.
[] Do not place or store items that can melt or catch
fire on the glass cooktop, even when it is not
being used. If the cooktop is inadvertently turned
on, they may ignite. Heat from the cooktop or
oven vent after it is turned off may cause them to
ignite also.
[] Use CERAMA BRYTE ®ceramic Cooktop Cleaner
and CERAMA BRYTE ® Cleaning Pad to clean
the cooktop. Wait until the cooktop cools and
the indicator light goes out before cleaning. A
wet sponge or cloth on a hot surface can cause
steam burns. Some cleaners can produce
noxious fumes if applied to a hot surface.
NOTE: Sugar spills are an exception. They
should be scraped off while still hot using an
oven mitt and a scraper. See the Cleaning the
glass cooktop section for detailed instructions.
[] Read and follow all instructions and warnings on
the cleaning cream label.
m
Z
O
n
O
Z
[A WARNING i OVENSAFETYINSTRUCTIONS
[] Stand away from the range when opening the []
oven door. Hot air or steam which escapes can
cause burns to hands, face and/or eyes. []
[] Do not use the oven if a heating element
develops a glowing spot during use or shows
other signs of damage. A glowing spot indicates
the heating element may fail and present a []
potential burn, fire, or shock hazard. Turn the
oven off immediately and have the heating
element replaced by a qualified service
technician.
[] Keep the oven vent unobstructed.
[] Keep the oven free from grease buildup. Grease
in the oven may ignite.
[] Place oven racks in desired location while oven
is cool. If rack must be moved while oven is hot,
do not let pot holder contact hot heating element
in oven.
When using cooking or roasting bags in the
oven, follow the manufacturer's directions.
Pull the oven rack to the stop-lock position when
loading and unloading food from the oven. This
helps prevent burns from touching hot surfaces
of the door and oven walls.
Do not leave items such as paper, cooking
utensils or food in the oven when not in use.
Items stored in an oven can ignite.
[]
Never place cooking utensils, pizza or baking
stones, or any type of foil or liner on the oven
floor. These items can trap heat or melt, resulting
in damage to the product and risk of shock,
smoke or fire.
SAVETHESEINSTRUCTIONS
49 80690 4 5
Z
©
m
tY
©
EL
Z
m
>.,
I,.tJ
IMPORTANT SAFETYINFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
j/i, WARNING i SELF-CLEANINGOVEN SAFETYINSTRUCTIONS
The self-cleaning feature operates the oven at temperatures high enough to burn away food soils in the
oven. Follow these instructions for safe operation.
[] Do not touch oven surfaces during self-clean
operation. Keep children away from the oven
during self-cleaning. Failure to follow these
instructions may cause burns.
[] Before operating the self-clean cycle, remove pans,
shiny metal oven racks and other utensils from the
oven. Only gray porcelain-coated oven racks may
be left in the oven. Do not use self-clean to clean
other parts, such as drip pans or bowls.
[] Before operating the self-clean cycle, wipe
grease and food soils from the oven. Excessive
iA WARNING i WARMING DRAWERSAFETYINSTRUCTIONS(somemode s)
amount of grease may ignite leading to smoke
damage to your home.
[] If the self-cleaning mode malfunctions, turn the
oven off and disconnect the power supply. Have
it serviced by a qualified technician.
[] Do not clean the door gasket. The door gasket is
essential for a good seal. Care should be taken
not to rub, damage or move the gasket.
[] Do not use oven cleaners. No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
[] The purpose of the warming drawer is to hold hot
cooked foods at serving temperature. Bacteria
will grow in food while it is below 140°F. Do not
put cold food in warming drawer. Do not heat
food for more than 2 hours. Failure to follow
these instructions may result in foodborne illness.
[] Do not leave paper products, plastics, canned
food or combustible materials in the drawer. They
may ignite.
[] Do not touch the heating element or the interior
surface of the drawer. These surfaces may be
hot enough to cause burns.
The remote enable equipment installed on some
models has been tested and found to comply with
the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to:
(a) provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
[] Use care when opening the drawer. Open the
drawer a crack and let hot air or steam escape
before removing or replacing food. Hot air or
steam that escapes can cause burns to hands,
face and/or eyes.
[] Do not use aluminum foil to line the lower
drawer. The foil will trap heat below, and upset
the performance of the oven. Foil can melt
and permanently damage the drawer bottom.
Damage from improper use of aluminum foil is
not covered by the product warranty.
[] Reorient or relocate the receiving antenna.
[] Increase the separation between the equipment
and receiver.
[] Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
[] Consult the dealer or an experienced radio/TV
technician for help.
(b) accept any interference received, including
interference that may cause undesired operation of
the device.
Note that any changes or modifications to the
wireless communication device installed on this
oven that are not expressly approved by the
manufacturer could void the user's authority to
operate the equipment.
SAVETHESEINSTRUCTIONS
49 80690 4
Thank You! ... for your purchase of a GE Brand appliance.
Register Your Appliance: Register your new appliance on-line at your convenience!
www.geappliances.com/service_and_support/register/
Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty,
should the need arise. You may also mail in the pre-printed registration card included in the packing material.
GE Electric Range Warranty
GEAppliances.com
All warranty service is provided by our Factory Service Centers, or an authorized Customer Care® technician.
To schedule service, on-line, visit us at www.geappliances.com/service_and_support/, or call 800.GE.CARES
(800.432.2737). Please have serial number and model number available when calling for service.
Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a GE factory
service technician the ability to quickly diagnose any issues with your appliance and helps GE improve its products
by providing GE with information on your appliance. If you do not want your appliance data to be sent to GE, please
advise your technician not to submit the data to GE at the time of service.
For the period of one year from the date of the original purchase. GE will provide any part of the range which fails due
to a defect in materials or workmanship. During this limited one-year warranty, GE will also provide, free of charge, all
labor and in-home service to replace the defective part.
What GE will not cover:
[] Service trips to your home to teach you how to use
the product.
[] Improper installation, delivery or maintenance.
[] Failure of the product if it is abused, misused,
modified or used for other than the intended purpose
or used commercially.
[] Damage to the glass cooktop caused by use of
cleaners other than the recommended cleaning
creams and pads.
[] Damage to the glass cooktop caused by hardened
spills of sugary materials or melted plastic that
are not cleaned according to the directions in the
Owner's Manual.
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties,
including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the
shortest period allowed by law.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use
within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you
may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location
for service. In Alaska, the warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights
are, consult your local or state consumer affairs office or your state's Attorney General.
[] Replacement of house fuses or resetting of circuit
breakers.
[] Damage to the product caused by accident, fire,
floods or acts of God.
[] Incidental or consequential damage caused by
possible defects with this appliance.
[] Damage caused after delivery.
[] Product not accessible to provide required service.
[] Service to repair or replace light bulbs, except for
LED lamps.
Z
-<
rn
cp
oN
m _
C _
2:3 _
_ 0
Warrantor: General Electric Company. Louisville, KY 40225
Extended Warranties: Purchase a GE extended warranty and learn about special discounts that are available while
your warranty is still in effect. You can purchase it on-line anytime
www.geappliances.com/service_and_support/shop-for-extended-service-plans.htm
or call 800.626.2224 during normal business hours. GE Consumer Home Services will still be there after your
warranty expires.
49 80690 4 7
of)
m
©
of)
of)
Ld
¢.)
<
Ld
¢,.)
Z
of)
m
of)
of)
<
Have a question or need assistance with your appliance?
Try the GE Appliances Website (www.geappliances.comlservice_and_supportl) 24 hours a day, any day of the
year! For greater convenience and faster service, you can now download Owner's Manuals, order parts or even
schedule service on-line.
Schedule Service: Expert GE repair service is only one
step away from your door. Get on-line and schedule your
service at www.geappliances.com/service_and_support/
Or call 800.GE.CARES (800.432.2737) during normal
business hours.
Remote Connectivity: For assistance with oven wireless
network connectivity, please call 1-800-220-6899.
Parts and Accessories: Individuals qualified to service their
own appliances can have parts or accessories sent directly
to their homes (VISA, MasterCard and Discover cards are
accepted).Order on-line today, 24 hours every day or by
phone at 800.626.2002 during normal business hours.
Instructions contained in this manual cover procedures
to be performed by any user. Other servicing generally
should be referred to qualified service personnel. Caution
must be exercised, since improper servicing may cause
unsafe operation.
Real Life Design Studio: GE supports the Universal
Design concept of products, services and environments
that can be used by people of all ages, sizes and
capabilities. We recognize the need to design for a wide
range of physical and mental abilities and impairments.
For details of GE's Universal Design applications,
including kitchen design ideas for people with disabilities,
check out our Website today. For the hearing impaired,
please call 800.TDD.GEAC (800.833.4322).
Remote Connectivity: For assistance with oven wireless
network connectivity (for models with remote enable),
please call 1.800.220.6899.
Contact Us: If you are not satisfied with the service you
receive from GE, contact us on our Website with all the
details including your phone number, or write to:
General Manager, Customer Relations
GE Appliances, Appliance Park Louisville, KY 40225
Accessories
Looking For Something More?
GE offers a variety of accessories to improve your cooking and maintenance experiences!
To place an order visit us online at:
www.GEApplianceParts.com (U.S.) or www.GEAppliances.ca (Canada)
or call 800.626.2002 (U.S.) 800.661.1616 (Canada)
The following products and more are available:
Accessories
Small Broiler Pan (8 ¾"x 1 1/4"x 13 ½")
Large* Broiler Pan (12 ¾" x 1 1A,x 16 ½")
XL** Broiler Pan (17" x 1 1¼"x 19 1A,)
Parts
Oven racks
Oven elements
Light bulbs
WB48X10055 (US) 222D2097G001 (Canada)
WB48X10056 (US) 222D2097G002 (Canada)
WB48X10057 (US) Not available in Canada
Part numbers vary by model
Part numbers vary by model
Part numbers vary by model
Cleaning Supplies
CitruShine Stainless Steel Wipes
CERAMA BRYTE ®Stainless Steel Appliance Cleaner
CERAMA BRYTE ®Cleaning Pads for Ceramic Cooktops
CERAMA BRYTE ®Ceramic Cooktop Cleaner
CERAMA BRYTE ®Ceramic Cooktop Scraper
Kit (Kit includes cream and cooktop scraper)
*The large broiler pan does not fit in 20"/24" ranges.
**The XL broiler pan does not fit in 24" wall ovens, 27"drop ins or 20"124" range.
WX10X10007
PM10X311
WX10X350
WX10X300
WX10X0302
WB64X5027
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping film To assure no damage is done to the finish of the
with your fingers and slowly peel it from the appliance product, the safest way to remove the adhesive from
surface. Do not use any sharp items to remove the film. packaging tape on new appliances is an application of
Remove all of the film before using the appliance for the a household liquid dishwashing detergent. Apply with a
first time. soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
49 80690 4
Surface Units
j i FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high
A_.WARNING j settings.Keepflammableitemsawayfromthecooktop.-rumoffa,controlswhendone
cooking. Failure to follow these instructions can result in fire, serious injury or death.
Throughout this manual, features and appearance may vary from your model.
C
Co
i
Z
Gb
.--.4
I
How to Set
Push the knob in and turn in either direction to the
setting you want.
Off
off
Melt
Co
A surface ON indicator light will glow when any surface
unit is on
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
[] come on when the unit is hot to the touch.
[] stay on even after the unit is turned off.
[] stay on until the unit is cooled to
approximately 150°F.
"6
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to
OFF when you finish cooking.
2 •
Melt setting (on some models) will
melt chocolate or butter.
Dual and Triple Surface Units and Control Knobs (on some models)
The surface unit has 2 or 3 cooking sizes to select from so you can match the size of the unit to the size of the
cookware you are using,
Small Large
Burner • Off _ Burner
• I i "
Small t_ Large
Burner • Off _Burner
Hi _ 4, Lo
Hi
Z
u"b
rT'l
"8
i i
C/o
C
-'3
'-"h
o
("D
i.
U0
; / .o
2._-_. "4
Lo 2
Models with a Dual-Ring surface
element only
49 80690 4 9
Models with a Tri-Ring surface
element only.
oO
t-
(1)
(D
G3
q__
C/9
(.9
Z
<I:
Surface Units (Cont.)
Throughout this manual, features and appearance may vary from your model.
Using the Bridge Zone (on some models)
To use the bridge zone, adjust the knobs for the Left rear
and Left front elements to create one large area for even
cooking.
Models with a bridge Zone only.
LIJ
.-r.
k.-
(.9
Z
m
Using the Warming Zone
i, WARN NGi
FOOD POISON HAZARD: Bacteria may grow in food at
temperatures below 140°F.
[] Always start with hot food. Do not use warm setting to
heat cold food.
[] Do not use warm setting for more than
2 hours.
The WARMING ZONE, located in the back center of
the glass surface, will keep hot, cooked food at serving
temperature. Always start with hot food. Do not use to
heat cold food. Placing uncooked or cold food on the
WARMING ZONE could result in foodborne illness.
Turn the control knob to the ON position.
For models using the touch pads for warming zone
control, see section on "Using the Oven" for additional
details.
For best results, all foods on the WARMING ZONE
should be covered with a lid or aluminum foil. When
warming pastries or breads, the cover should be vented
to allow moisture to escape.
The initial temperature, type and amount of food, type of
pan, and the time held will affect the quality of the food.
Always use pot holders or oven mitts when removing
food from the WARMING ZONE, since cookware and
plates will be hot.
NOTE: The surface warmer will not glow red like the
cooking elements,
[]
I Zone I
L oo/o. j
Off
On
Warming Zone
Med H[_
Set Warming Zone
0 49 80690 4
Surface Units (Cont.)
Home Canning Tips
Be sure the canner is centered over the surface unit,
Make sure the canner is flat on the bottom,
To prevent burns from steam or heat, use caution when
canning,
For Models With a Radiant Glass Cooktop
The radiant cooktop features heating units beneath a
smooth glass surface.
NOTE: A slight odor is normal when a new cooktop is
used for the first time. It is caused by the heating of new
parts and insulating materials and will disappear in a
short time.
NOTE: On models with light-colored glass cooktops, it is
normal for the cooking zones to change color when hot
or cooling down. This is temporary and will disappear as
the glass cools to room temperature.
The surface unit will cycle on and off to maintain your
selected control setting.
It is safe to place hot cookware on the glass surface
even when the cooktop is cool.
Even after the surface units are turned off, the glass
cooktop retains enough heat to continue cooking. To
avoid overcooking, remove pans from the surface units
when the food is cooked. Avoid placing anything on the
surface unit until it has cooled completely.
[] Water stains (mineral deposits) are removable using
the cleaning cream or full-strength white vinegar.
[] Use of window cleaner may leave an iridescent film on
the cooktop. The cleaning cream will remove this film.
[] Don't store heavy items above the cooktop. If they
drop onto the cooktop, they can cause damage.
[] Do not use the surface as a cutting board.
Use recipes and procedures from reputable sources.
These are available from manufacturers such as Ball®
and Kerre and the Department of Agriculture Extension
Service.
Flat-bottomed canners are recommended. Use of water
bath canners with rippled bottoms may extend the time
required to bring the water to a boil.
Never cook directly on the glass.
Always use cookware.
Always place the pan in the center of
the surface unit you are cooking on.
.............
Do not slide cookware across the cooktop
beceuse it con scrotch the gloss--the gloss
is scratch-resistant, not scratch proof.
C
m
Z
Gb
,--4
I
Z
rT1
i i
Go
C
"=3
db
q)
i.
r_
bO
Temperature Limiter on Radiant Glass Cooktops
Every radiant surface unit has a temperature limiter.
The temperature limiter protects the glass cooktop from
getting too hot.
The temperature limiter may cycle the surface units off
for a time if:
[] the pan boils dry.
[] the pan bottom is not flat.
[] the pan is off-center.
[] there is no pan on the unit.
CL
O
4-J
O
©
LD
O9
OO
LD
4-J
r-
CO
-(D
r-Y"
i,
O
q..-
(13
i
0_
O
©
LD
(D
Z
<l:
Cookware for Radiant Glass Cooktop
The following information will help you choose cookware which will give good performance on glass cooktops.
Stainless Steel:
recommended
Aluminum:
heavy weight recommended
Good conductivity. Aluminum residues
sometimes appear as scratches on the
cooktop but can be removed if cleaned
immediately. Because of its low melting
point, thin weight aluminum should not
be used.
Copper Bottom:
recommended
Copper may leave residues which can
appear as scratches. The residues can
be removed, as long as the cooktop
is cleaned immediately. However, do
not let these pots boil dry. Overheated
metal can bond to glass cooktops. An
overheated copper bottom pot will leave
a residue that will permanently stain the
cooktop if not removed immediately.
Porcelain Enamel on Cast Iron:
recommended if bottom of pan is coated
Porcelain Enamel on Steel:
not recommended
Heating empty pans can cause
permanent damage to cooktop glass.
The enamel can melt and bond to the
ceramic cooktop.
Glass-ceramic:
not recommended
Poor performance. Will scratch the
surface.
Stoneware:
not recommended
Poor performance. May scratch the
surface.
Cast Iron:
not recommended--unless designed
specifically for glass cooktops
Poor conductivity and slow to absorb
heat. Will scratch the cooktop surface.
Check pans for flat bottoms by using
a straight edge.
i,,lJ
I
k.-
(D
Z
m
Pans with rounded, curved, ridged or
warped bottoms are not recommended.
NOTE" Follow all cookware manufacturer's recommendations when using any type of cookware on the ceramic cooktop.
For Best Results
[] Place only dry pans on the surface elements. Do not
place lids on the surface elements, particularly wet
lids. Wet pans and lids may stick to the surface when
cool.
[] Do not use woks that have support rings. This type of
wok will not heat on glass surface elements.
[] We recommend that you use only a flat-bottomed
wok. They are available at your local retail store. The
bottom of the wok should have the same diameter as
the surface element to ensure proper contact.
[] Some special cooking procedures require specific
cookware such as pressure cookers or deep-fat
fryers. All cookware must have flat bottoms and be
the correct size.
Do not place wet pans on the glass cooktop.
Do not use woks with support rings on the
glass cooktop.
Use fiat-bottomed woks on the glass cooktop.
12 49 80690 4
Notes
(J
0
u_
Oven Controls
0
L_
C
©
C
Q
>
Cook,ng _ 71 I Iso''ogS
(.9
Z
LLJ
:E
p-
(.9
Z
m
V_
@
(on some
_Bake-_ _-Br%il--_ Ga[]rm----_ / II "-S-_art--L_ _-C_[]°k---_ _T_ -_
Warming
-- Probe Drawer _--'/ _ J'_r _ _ R_em_
' -ht J 1
4 49 80690 4
Oven Controls
1. Convection Cooking Modes: Convection
cooking modes use increased air circulation to improve
performance. The type of benefit depends on the
mode. Your oven has the following convection cooking
modes: Convection Bake and Convection Roast. See
the Cooking Modes section for more information.
2. Traditional Cooking Modes: Your oven has
the following traditional cooking modes: Bake, Broil Hi/
Lo, and Warm. See the Cooking Modes section for
more information.
,
Clean: Your oven has two cleaning modes: Self
Clean and Steam Clean. See the Cleaning the Oven
section for important information about using these
modes.
4, Start: Must be pressed to start any cooking,
cleaning, or timed function.
5. Cancel/Off: Cancels ALL oven operations except
the clock, timer, Warming Drawer and Warming Zone.
6. Cook Time: Counts down cooking time and turns
off the oven when the cooking time is complete. Press
the Cook Time pad, use the number pads to program
a cooking time in hours and minutes, then press Start.
This can only be used with Bake, Convection Bake,
and Convection Roast.
,
Clock: Sets the oven clock time. Press and hold the
9, 0 pads for three seconds or press the Set Clock
pad, then use the number pads to program the clock.
Press Start to save the time.
,
Timer On/Off: Works as a countdown timer.
Press the Timer On/Off pad and the number pads
to program the time in hours and minutes. Press the
Start pad. The timer countdown is complete. To turn
the timer off press the Timer On/Off pad.
,
Delay Time: Delays when the oven will turn on.
Use this to set a time when you want the oven to start.
Press the Delay Time pad and use the number pads
to program the time of day for the oven to turn on
then press Start. Press the desired cooking mode and
temperature then press Start. A Cook Time may also
be programmed if desired. Follow the directions under
Cook Time for setting this feature. This can only be
used with Bake, Convection Bake, Convection Roast,
and Self-Clean.
NOTE: When using the Delay Time feature, foods that
spoil easilyisuch as milk, eggs, fish, stuffings, poultry
and porkishould not be allowed to sit for more than
1 hour before or after cooking. Room temperature
promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will
speed harmful bacteria growth.
10. Oven Light: Turns the oven light on or off.
11. Lock Controls: Locks out the control so that
pressing the pads does not activate the controls. Press
the Lock Controls pad, for three seconds to lock or
unlock the control. Cancel/Off is always active, even
when the control is locked.
12. Warming Drawer (on some models) or
Warming Zone: Will keep hot, cooked foods at
serving temperature. Press the Warming Drawer/
Warming Zone pad. Use the number pad to select the
temperature setting. Press 1 for Low, 2 for Medium
or 3 for High, then press Start. Drawer is below the
Oven, Zone is on the Cooktop.
NOTE: The Cancel/Off pad does not turn off the
Warming Drawer or Warming Zone. To turn off, press
the Warming Drawer or Warming Zone pad.
13. Probe (on some models): Monitors internal
food temperature and turns the oven off when the
food reaches the programmed temperature. Insert the
probe, program the cooking mode, and program the
probe temperature. See the Cooking Modes section
for more information. The probe can only be used with
Bake and Convection Roast.
14.
Remote Enable (on some models): The
oven needs to be connected to your home network
before using the Remote Enable pad. The connectivity
symbol signifies the status of the oven connection to
your home network.
CONNECTING YOUR OVEN t._
Off - Oven is not connected. Open the app then press
and hold Remote Enable pad for 5 seconds to begin
the connecting process.
Slow flash - Oven is in discovery mode and looking
for a network.
Solid - Oven is connected to the network and can
be remotely controlled by a connected mobile device
when in operation, but cannot be started remotely.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely, press the
Remote Enable pad and the light above the Remote
Enable pad will turn on. Oven can now be remotely
started with a connected device. Opening oven door
or turning off oven will turn off the light above the
Remote Enable pad. The light above the Remote
Enable pad must be lit to start the oven remotely. The
light above the Remote Enable pad is not required to
change the oven settings or to turn oven off.
After using the oven, remember to verify that the light
above the Remote Enable pad is on if you wish to
start an oven remotely in the future.
C
itiii
Z
G'b
-.4
I
Z
G'b
i'-rl
i i
O
<
©
Cb
©
""3
©
i
O0
Of3
Special Features
Q
4-J
Q
LJ._
n
LP
Q
o_
Or)
©
Z
LI
212
©
Z
There are several different special features on your range. To change the settings of these special features:
m Press the Bake and Broil pads at the same time and hold for three seconds.
m "SF" will appear in the display.
m Select the feature you want to change.
m When the change has been made, press the Start key to save the change and return to the time of day.
Adjust the Oven Temperature
This feature allows the oven baking and convection
baking temperature to be adjusted up to 35°F hotter
or down to 35°F cooler. Use this feature if you believe
your oven temperature is too hot or too cold and wish to
change it. This adjustment affects Bake and Convection
Bake modes. No other cooking modes are affected.
Press the Bake pad to enter the temperature adjustment
mode. A number between 35 and - 35 will display.
Use the number pads to set the desired temperature
adjustment and use the Bake pad to change between
negative and positive. Press the Start pad to save the
temperature adjustment.
End of Timer Signals
This is the tone that signals the end of a timer. The tone
can be continuous (Con bEEP) or one repeating beep
(bEEP). A continuous setting will continue to sound a tone
until a button on the control is pressed. Press the Broil pad
to view the current setting and then to change the setting.
Fahrenheit or Celsius Temperature Display
The oven control is set to use Fahrenheit temperatures
(F), but you can change it to use Celsius temperatures
(C). Press the number 6 and 8 pads at the same time to
view the current setting, press again to change the setting.
Clock Display
This feature specifies how the time of day will be
displayed or if no time of day will be displayed. You can
select a standard 12-hour clock (12 H), 24-hour military
time display (24 H), or no clock displayed (oFF). Press
the Clock pad to view the current setting, press again to
change the setting.
Auto Recipe Conversion
When using Convection Bake cooking, Auto Recipe
Conversion will automatically convert the regular baking
temperatures entered to convection bake cooking
temperatures when turned on. Note that this option
does not convert convection bake cooking times, it only
converts temperatures. Press the Convection Bake pad
to view the conversion settings, press again to toggle
between On (Con On) and Off (Con oFF).
Sound Volume
This feature allows the oven tone volume to be adjusted
between high (HI bEEP HI), medium (Std bEEP Std),
low (Lo bEEP Lo) and off (oFF bEEP oFF). Press the
number 1 and 5 pads at the same time to view the
current setting or to change the setting. The control will
sound the oven tone at the new volume level each time
the sound level is changed.
Preheat Notification Lighting
(on some models)
This feature will turn on the oven light when the oven
has reached the set temperature. The oven light will
remain on until the Oven Light pad is pushed. Press the
Oven Light pad to view the current setting, press again
to change the setting.
12-hour auto shut-off and Sabbath
Options for this feature are "12 SHdn", "no SHdn" and
"SAbbAtH".
12-hour auto shut-off turns off the oven after 12 hours of
continuous operations.
Sabbath mode disables all sounds (the control will not
beep when a button is pressed), Convection, Broil,
Warm, Cook Time, Timer, Clock, and Delay Time
functions. Sabbath mode can only be used with Bake.
This feature conforms to the Star-K Jewish Sabbath
requirements.
NOTE: The oven light comes on automatically (on some
models) when the door is opened and goes off when the
door is closed. The bulb may be removed. See the Oven
Light Replacement section. On models with a light switch
on the control panel, the oven light may be turned on
and left on.
Press the Delay Time pad to view the current setting
and then to change the setting.
To use Sabbath mode, select "SAbbAtH" and press 8tart.
A ] will appear in the display and the clock will not display.
Once in Sabbath mode, at any time you can press Bake,
use the number pads to enter a temperature between
170°F and 550°F, and press Start. No sound will be
given when the keys are pressed. At a random time
between 30 seconds and 1 minute, ][, will appear in the
display indicating the oven is running.
If you need to adjust the temperature, press Bake, use
the number pads to enter a new temperature between
170°F and 550°F, and press Start.
To exit Sabbath mode, make sure that the oven is turned
off. To turn the oven off, press CanceUOff. The oven will
immediately turn off and ][ will change to ] indicating that
the oven has turned off. Press and hold the Bake and Broil
pads for 3 seconds to enter special features then press
Delay Time until either "12 Shdn" or "no Shdn" is in the
display and press Start.
NOTE: If power outage occurs during Sabbath mode the unit
will remain in Sabbath mode but off when power is restored.
If you wish to use the Cook Time feature (if available) to
bake in the oven and then have the oven automatically
turn off, you will need to press the Cook Time pad, enter a
cooking time duration, and press Start. Then enter special
features to start Sabbath mode as detailed above.
16
49 80690 4
Oven Racks
Recommended rack positions for various types of
foods are provided in the Cooking Guide. Adjusting
rack position is one way to impact cooking results. For
example, if you would prefer darker tops on cakes,
muffins, or cookies, try moving food one rack position
higher. If you find foods are too brown on top try moving
them down next time.
When baking with multiple pans and on multiple racks,
ensure there is at least 1½" between pans to allow
sufficient space for air to flow.
Your Oven may have extension racks and/or traditional
flat racks.
To avoid possible burns, place the racks in the desired
position before you turn the oven on.
Extension Racks
Always pull the rack out by its upper front rail to its fully
open position, when placing or removing cookware.
If extension racks are difficult to extend, lubricate the
racks with the graphite lubricant provided with your
oven. Remove the rack from the oven, remove debris in
the side tracks with a paper towel, shake the graphite
lubricant and place 4 small drops on the two bottom
tracks of the left and right sides. Open and close the
rack several times to distribute the lubricant.
To order additional graphite lubricant, read the
Assistance and Accessories section at the beginning of
the manual.
I
The number of rack positions may vary by model.
Upper Front
Rail
Fully Open Position
C
¢fJ
m
Z
©
I
Z
©
i m
O
<
q)
_a
C)
th
To Remove An Extension Rack:
1. Make sure the rack is pushed all the way into the
oven so that side paddles on the rack disengage from
the oven support.
2. Slide the rack toward you to the bump (stop position)
on the rack support.
3. Firmly grasp both sides of the rack frame and the
sliding rack, tilt the front end up and pull it out.
To Replace An Extension Rack:
1. Firmly grasp both sides of the rack frame and the
sliding rack.
2. Place the curved end of the rack (stop-locks) onto the
oven supports, tilt up the front of the rack and push it
in as far as it will go.
If extension racks are difficult to replace or remove, wipe
the oven rack supports with cooking oil. Do not wipe oil
on the rack slides.
To Lubricate the Paddle:
Shake lubricant and apply to the moving parts of the
paddle mechanisms as shown.
Grasp here
498°69°4 17
OG
Aluminum Foil and Oven Liners
(1)
R:D
O
Z
E:T)
t-
O
O
^ CAUTION: Donotuseanytypeoffoiloroven.nettocovertheovenbottomTheseitemscantrap
heat or melt, resulting in damage to the product and risk of shock, smoke or fire. Damage from improper use
of these items is not covered by the product warranty.
Foil may be used to catch spills by placing a sheet on a lower rack, several inches below the food. Do not use more
foil than necessary and never entirely cover an oven rack with aluminum foil. Keep foil at least 1-1/2" from oven walls
to prevent poor heat circulation.
LD
Cookware
(1)
L._
Cookware Guidelines
G5
The material, finish, and size of cookware affect baking
performance.
O
Dark, coated and dull pans absorb heat more readily
O
LD
._.J
than light, shiny pans. Pans that absorb heat more
readily can result in a browner, crisper, and thicker crust.
If using dark and coated cookware check food earlier
OO
than minimum cook time. If undesirable results are
L._
(1)
obtained with this type of cookware consider reducing
r-
oven temperature by 25° F next time.
r-
Cooking Modes
(D
>
Your new oven has a variety of cooking modes to help you get the best results. These modes are described below.
O
<i:
Refer to the Cooking Guide section for recommendations for specific foods. Remember, your new oven may perform
differently than the oven it is replacing.
r-
Baking and Roasting Modes
G3
Select a mode for baking and roasting based on the
type and quantity of food you are preparing. When
O
preparing baked goods such as cakes, cookies, and
pastries always preheat the oven first. Follow recipe
recommendations for food placement. If no guidelines
E
are provided, center food in the oven.
r-
Bake
The bake mode is intended for single rack cooking. This
E
mode uses heat primarily from the lower element but
also from the upper element to cook food. To use this
mode press the Bake pad, enter a temperature, and
then press Start. Preheating is generally recommended
when using this mode.
©
Z
tY
ill
3::
©
Z
m
cO
Convection Bake Multi Rack
The Convection Bake Multi Rack mode is intended
for baking on multiple racks at the same time. This
mode uses heat primarily from the rear element but
also heat from the upper and lower elements, along
with air movement from the convection fan to enhance
cooking evenness. Your oven is equipped with Auto
Recipe Conversion, so it is not necessary to convert the
temperature when using this mode. Baking time might
be slightly longer for multiple racks than what would be
expected for a single rack. To use this mode press the
Convection Bake pad, enter a temperature, and then
press Start. Always preheat when using this mode.
18 49 80690 4
Shiny pans can produce more evenly cooked baked
goods such as cakes and cookies.
Glass and ceramic pans heat slowly but retain heat well.
These types of pans work well for dishes such as pies
and custards.
Air insulated pans heat slowly and can reduce bottom
browning.
Keep cookware clean to promote even heating.
Convection Roast
The Convection Roast mode is intended for roasting
whole cuts of meat on a single rack. This mode uses
heat from the lower, upper, and rear elements along
with air movement from the convection fan to improve
browning and reduce cooking time. It is not necessary to
convert temperature. Check food earlier than the recipe
suggested time when using this mode or use a meat
probe. To use this mode press the Convection Roast
pad, enter a temperature, and then press Start. It is not
necessary to preheat when using this mode.
Broiling Modes
Always broil with the door open. Monitor food closely
while broiling. Use caution when broiling on upper rack
positions as placing food closer to the broil element
increases smoking, spattering, and the possibility of fats
igniting. For best performance center food below the
broil heating element. Broiling on the upper most rack
position is not recommended.
Try broiling foods that you would normally grill. Adjust rack
positions to adjust the intensity of the heat to the food.
Place foods closer to the broil element when a seared
surface and rare interior is desired. Thicker foods and
foods that need to be cooked through should be broiled on
a rack position farther from the broiler or by using Broil Lo.
Cooking Modes (Cont.)
Broil Hi
The Broil Hi mode uses intense heat from the upper
element to sear foods. Use Broil Hi for thinner cuts of
meat and/or foods you prefer less done on the interior.
To use this mode press the Broil pad once and then
press Start. It is not necessary to preheat when using
this mode.
Broil Lo
The Broil Lo mode uses less intense heat from the upper
element to cook food thoroughly while also producing
surface browning. Use Broil Lo for thicker cuts of meat
andlor foods that you would like cooked all the way
through. To use this mode press the Broil pad twice and
then press Start. It is not necessary to preheat when
using this mode.
Warm
Warm mode is designed to keep hot food hot, it is not
intended to heat cold food. To use this mode, press
the Warm pad then press Start. Preheating is not
required. Cover foods that need to remain moist and
do not cover foods that should be crisp. Warm can
be used for crisping crackers, chips or dry cereal. It is
recommended, for food quality, that food not be kept
warm for more than 2 hours.
Probe (on some models)
Internal food temperature is frequently used as an
indicator of doneness, especially for roasts and poultry.
The Probe mode monitors the internal food temperature
and turns the oven off when the internal food
temperature reaches the programmed temperature.
Minimum temperatures for food safety can be found at
www.lsltDoneYet.gov. The temperature probe can only
be used with Bake, Convection Bake, and Convection
Roast modes.
To use the probe with preheating:
1. Press the desired cook mode (Bake, Convection
Bake, or Convection Roast) pad and enter the
desired cooking temperature.
2. Insert the probe into the food (see Proper Probe
Placement Guidelines in this section).
3. Once the oven is preheated, place the food in the
oven and connect the probe to the probe outlet,
making sure it is fully inserted. Use caution, the oven
walls and probe outlet are hot.
4. Program the probe temperature by pressing the
Probe pad and entering the desired food temperature.
The maximum internal food temperature that you can
set is 200° F.
C
m
To use the probe without preheating: Z
1. Insert the probe into the food (see Proper Probe
Placement Guidelines in this section).
2. Place the food in the oven and connect the probe into ""i
the probe outlet in the oven.
rri
3. Program the desired probe and cooking mode settings
by pressing the Probe pad and entering the desired
food temperature, then pressing the cook mode pad :_
(Bake, Convection Bake, or Convection Roast) and Z
entering the desired cooking temperature.
Proper Probe Placement Guidelines
After preparing the meat and placing it on the cooking O
pan follow these guidelines for proper probe placement. O
[] Insert the probe completely into the meat, up to the O
handle, such that the point of the probe will rest in the 7_"
center of the thickest part of the meat. ::::3
[] The probe should not touch bone, fat or gristle. (L:)
[] For whole poultry insert the probe into the thickest
part of the breast. O
[] For boneless roasts, insert the probe into the center O
of the roast. (]::)
[] For bone-in ham or lamb, insert the probe into the (/)
center of the lowest large muscle or joint.
[] For casseroles or dishes such as meatloaf, insert the
probe into the center of the dish.
[] For fish, insert the probe from just above the gill into
the meatiest area, parallel to the backbone.
Check the temperature at other locations in the food
with a food thermometer once the probe temperature
is reached to ensure that all portions of the food have
reached desired temperatures.
Probe Care Guidelines
[] Use of probes other than the one provided with this
product may result in damage to the probe.
[] Use the handles of the probe and plug when inserting
and removing them from the meat and outlet
[] To avoid damaging your probe, do not use tongs to
pull on the cable when removing it.
[] To avoid breaking the probe, make sure food is
completely defrosted before inserting the probe.
[] To prevent possible burns, do not unplug the probe
from the outlet until the oven has cooled.
[] Never leave the probe inside the oven during a self or
steam clean cycle.
[] Do not store the probe in the oven.
(1)
-O
LP
Cooking Guide
ESb
t-
O
O
LP
©
Z
tY
-r-
p-
©
Z
m
oO
Baked Goods
Layer Cakes, sheet cakes,
bundt cakes, muffins, quick
breads on a Single Rack
Layer cakes* on Multiple
Racks
Chiffon cakes (angel food)
Cookies, biscuits, scones on a
Single Rack
Cookies, biscuits, scones on
Multiple Racks
Beef & Pork
Hamburgers Broil Hi 6
Steaks & Chops Broil Hi 6 ness/less searing. Watch food closely when broiling.
Roasts Bake 3 or 4 Use a low sided pan such as a broil pan. Preheating
Poultry
Whole chicken Convection Roast (if available) 3 or 4 Use a low sided pan such as a broil pan.
Bone-in chicken breasts, legs, Broil skin side down first. Watch food closely when
thighs Broil Lo 2 or 3 broiling. For best performance when broiling, center
Boneless chicken breasts Broil Lo 2 or 3 Broil skin side down first. Watch food closely when
Whole turkey Convection Roast (if available) 2 or 3 Use a low sided pan such as a broil pan.
Fish Broil Lo 6 (1/2 thick or less) Watch food closely when broiling. For best perfor-
Casseroles Ba ke 4
Frozen Convenience Foods
Pizza, french fries, tater tots,
chicken nuggets, appetizers
on a Single Rack
Pizza, french fries, tator tots,
chicken nuggets, appetizers
on Multiple Racks
Convection Bake (if available)
Convection Roast (if available) is not necessary
Convection Roast (if available)
Convection Bake (if available)
Ba ke
Bake
Bake
Bake
Bake
Bake
Broil Hi 2 If breaded or coated in sauce avoid Broil Hi modes.
Bake food below the broil heating element.
Bake broiling. For best performance when broiling, center
Bake
Bake
Ba ke
Bake
2, 4, and 6 (3 rack recommended
3 and 5
1
4
3 and 5
only for Convection Bake)
Use a broil pan; move food down for more done-
ness/less searing. Watch food closely when broiling.
For best performance center food below the broil
Use a broil pan; move food down for more done-
For best performance center food below the broil
If breaded or coated in sauce avoid Broil Hi modes.
2 or 3 Use a low sided pan such as a broil pan.
5 (>1/2 inch) mance center food below the broil heating element.
3 and 5
Use shiny cookware.
Ensure adequate airflow
(see illustration below).
Use shiny cookware.
Use shiny cookware.
Ensure adequate airflow.
heating element
heating element
food below the broil heating element
Use shiny cookware.
Use shiny cookware.
*When baking four cake layers at a time, use racks 3
and 5. Place the pans as shown so that one pan is not
directly above another.
Cook food thoroughly to help protect against food
borne illness. Minimum safe food temperature
recommendations for food safety can be found at
www.lsltDoneYet.gov. Make sure to use a food
thermometer to take food temperatures.
0 49 80690 4
[Z}--
Rack position for baking 4 layer cakes.