GE Monogram® 30" Built-In Single Oven
ZET1PHSS
ZET1PHSS
OVERALL DIMENSIONS
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
Overall Height 28 1/2" (72.4 cm)
Overall Depth
Including Handle
Oven Door Clearance 20 9/16" (52.3 cm)
Overall Oven
Interior Capacity
Oven Interior Dimensions
(W x H x D)
Minimum Cabinet Width* 30" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 200 lbs. (90 kg)
Cutout Width*
Cutout Height*
Cutout Depth* 23 1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length
Electrical Rating
Shipping Weight 208 lbs. (95 kg)
27 1/2" (69.9 cm)
5.0 cu. ft. (141.6 liters)
25" x 17 3/8" x 20 1/4"
(63.5 x 44.1 x 51.4 cm)
28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max
27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max
40" (72" available special
order: WB18T10398)
3.4 kW at 208V
4.5 kW at 240V
15/16"
(2.5)
cutout height
7/16"
(1.1)
28 5/8"
(72.8)
27 1/2"
(69.9)
29 3/4" (75.6)
28 1/2" (72.4)
min cutout width
27 1/4"
(69.2) min
22 1/2" (57.2)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
24 3/4" (62.9)
1 3/8" (3.5)
2 5/8" (6.8)
7 15/16"
(20.1)
14 7/8"
(37.8)
8 3/8"
(21.4)
SIDE VIEW
5/8"
(1.6)
28 7/16" (72.2)
10 1/2"
(26.6)
ZET1PHSS
5 3/16"
(13.2)
23 1/16"
1 7/8"
(4.7)
(58.7)
3 1/2"
(8.9)
12"
(30.5)
7 1/16"
(18.0 )
8 7/16"
(21.4)
* Additional space will be needed for flush installation.
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required.
An individual properly grounded branch circuit
or circuit breaker is required. Hard
junction box is required for built-in product.
wired
2 3/4"
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
(7.0)
TOP VIEW
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
Product Specification Revised 1/15
20 9/16"
(52.3) min
30 1/4" (76.8) flush inset width
with
1/4" (0.6) reveals
1 3/8"
(3.5)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 5/16"
(13.5)
9 1/2"
(24.1)
29 3/4" (75.5)
cutout width
9/16" (1.4) Bottom cleat
(Extends full depth of cabinet)
15/16"
(2.4)
Side cleats
3/4"
(1.9)
Top cleat
29 1/16"
(73.8)
Flush inset
height
24 15/16" (63.4)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
30 1/4" (76.8)
ZET1PHSS
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
ELEC.
ZET1PHSS
GE Monogram® 30" Built-In Single Oven
ZET1PHSS
WALL INSTALLATION
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
A
(59.7)
23 1/2"
min cutout depth
C
24 15/16" (63.4)
cutout depth
Top cleat
Side cleat
D
Bottom cleat
C
29 1/16"
(73.8)
Flush inset
height
1 3/8"
(3.5)
30 1/4" (76.8) flush inset width
with
3/4"
(1.9)
Top cleat
15/16"
(2.4)
Side cleats
9/16" (1.4) Bottom cleat
(Extends full depth of cabinet)
TOP VIEW
2 1/2"
Side cleats
1/4" (0.6) reveals
B
5 5/16"
(13.5)
29 3/4" (75.5)
cutout width
30 1/4" (76.8)
(6.4)
depth
ELEC.
9 1/2"
(24.1)
NOTES
A
Based on a user height
of 5' 6" to 5' 10"
B
Junction box location
(May also be located
in adjacent cabinet.)
C
Platform must be
able to support 200 lbs
(90 kg)
D
Cabinet surfaces must
be an appearance
finished surface for
flush installation.
E
Cleats may be visible
and should be finished
to match cabinetry.
F
Maximum toe kick
height of 4" when
installed beneath a
certified cooktop.
E
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
UNDERCOUNTER INSTALLATION
Dimension varies
23 1/2"
27 1/4"
(69.2)
(59.7) min cutout depth
F
STANDARD
INSTALLATION
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
5 5/16"
3"
(7.6)
9/16"
(1.4)
(13.5)
28 1/2" (72.4)
min cutout width
C
STANDARD INSTALLATION
FRONT VIEW
B
FLUSH INSET INSTALLATION
FRONT VIEW
Allow 1/4" (0.64) clearances
from side edges of oven door.
ELEC.
9 1/2"
(24.1)
24 15/16"
(63.4)
cutout depth
FLUSH INSET
INSTALLATION
Product Specification Revised 1/15
Loading...