GE Monogram ZBD5700, Monogram ZBD5900 Use And Care Manual

GE Monogram ®

Use and Care Guide

Z/)7/)T& YITOTI O_')'(I YIT,(:O r17

Dishwasher
ZBD5600
ZBD5700
ZBD5900

Consumer Information

Dishwasher

Introduction

Your new Monogram dishwasher makes an eloquent statement of style, convenience and kfl_hen
planning flexibili U. Whether you chose it tot its purity of design, practical features or assiduous
attention to detail-or tot all of these reasons-you'll find thai your Monogram dishwasher's

superior blend of form and flint tion will delight you for years to come.

The in%rmalion on the %llowing pages will help you operate and maintain your dishwasher
properly.

If you have any od_er questions-in the USA, please (;all tl_e GE Answer Center: 800.626.2000.
In Canada, please (;all 1.888.880.3030.

Or, visit our Websfle at: www. mom_gram.com

Conlents Appliance Registration ............. 3, 27, 28

Care and Cleaning ................... 15-18

Consumer Services .................... 3, 24

Model and Serial Number Location ........ 3

Operating Instructions ................ 7-14

Control Panel and settings for

ZBD5600 ........................... 7, 8

Control Panel and settings for

ZBD5700 and ZBD5900 ............. 9-11

Water Temperature ................... 12

Rinse Agent ......................... 12

Delergems .......................... 12

Dishwasher Racks ................. 13, 14

OptionM Accessories .................... 19

Problem Solver ...................... 20-23

Safety Instructions ..................... 4-6

USA Warranty .......................... 25

Canada Warranty ....................... 26

Consumer Information

1)ishwasher

B@re
using

yo_zr

dishwasher

Write

down the

model &

serial

n ?_ _lbers

Read this guide (areflllly. It is intended to help

you operate and maintain your new dishwasher

properly.

Keep it handy ti)r answers to your questions.

You can find tile model and serial numbers

at the inside left mb flange.

These numbers are also on tlle (;onsumer

Product Ownership Registration Card packed
separately with your dishwasher.

If you don't understand something or need

more help, call in the USA:

GE Answer Center: ,

800.626.2000,
24 hours a day, 7 days a week

In Canada, call 1.888.880.3030.
Or, visit our Website at: www. mo*_ogram.com

Before sending in this card, please write these
numbers here:

Model Number

Serial Number
Use these numbers in any correspondence or

ser_i( e (alls ( on( erning your dishwasher.

If you received

a damaged
dishwasher

Save time

& money

If you

need service

Immediately contact tile dealer (or builder)
that sold you the dishwasher.

Befi)re you request servi( e, check tile Problem It lists causes of minor operating problems that
Solver in tlle ba(k of this guide, you can (orre( t yourself

To obtain service, see tile Consumer Services

page in the back of this guide.
We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are steps to

ii)llow ti)r turther help.

For customers in the USA :

FIRST, contact tile people who serviced your
appliance. Explain why you are not pleased.
In most cases, this ,,,.,illsolve tlle problem.

NEXT, if you are still not pleased, write all the
details-induding your phone number-to:

For customers in Canada:

FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.

In most cases, this will solve tile problem.

NEXT, if you are still not pleased, write all the

details-including your phone number-to:

Manager, Consumer Relations
Camco Inc.

1 Factory I_ane, Suite 310

Moncton, N.B. E1 C 9M3

Manager, Customer Relations
GE Appliances

Appliance Park

Louisville, KY 40225

a, WARNING?

IMPORTANT SAFETY INSTRUCTIONS

J J

MESURES DE SECURITE IMPORTANTES

For your safety, the information in this guide

must be followed to minimize the risk of fire,

explosion, electric shock, or to prevent property
damage, personal injury, or loss of life.

• Do not tamper xdth controls.

• Do not abuse, sit oil, or stand oil the door or
dish rack of the dishwasher.

AMISE EN GARDE?

Pour votre s6curit6, veuillez suivre fi la lettre les
directives donn_es dans le present guide afin de

r6duire les risques d'incendie, d'explosion ou de

chocs 61ectriques, et pr_venir les dommages
mat6riels et les blessures ,graves ou mortelles.

•Ne modifiez pas le fimctionnement des

COlillilandes.

•Re illontez pas Oil ne VOllSassoyez pas Sill"la
porte ou les paniers du lave-vaisselle, et ne les
utilisez pas de tacon aN_sive.

• Do not discard a dishwasher x_ithout first

removing the door of the washing compartment.

• Do not store or use combustible materials,
gasoline or other flammable vapors and liquids

in the vicinity of this or any other appliance.

• Do not allow children to play inside, on or with

this appliance or any discarded appliance.

•Nejetez pas un lave-vaisselle sans en avoir

d'abord enlevO la porte.

•N'entreposez pas et n'utilisez pas d'essence,

de vapeurs ou de liquides inflammables a
proximitO de cet appareil ou de tout mme
OlectromOnager.

•Ne laissez pas les entmlts jouer avec le lave-

vaisselle ni monter dessus. Ne les laissez pas

s'introduire a l'intOrieur de cet appmeil ou
d'un vieil appareil qui ne sert plus.

AWATER HEATER SAFETY

Under certain conditions hydrogen gas may be

produced in a water heater that has not been

used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE.

ASECURITE DU CHAUFFE-EAU

Dans certaines conditions, il peut se former de
l'hydrogbne fi l'int6rieur d'un chauffe-eau qui

n'a pas servi pendant deux semaines ou plus.

L'HYDROGENE EST UN GAZ EXPLOSIF.

If the hot water has not been used for two weeks

or more, prevent the possibility of damage or
in jtn y by turning on all hot water taucets and
allo_dng them to run fin several minutes.

Do this beti)re using any electrical appliance
which is connected to the hot water system.
This simple procedure will allow any buih-up

hydrogen gas to escape. Since the gas is
flammable, do not smoke or use an open
flame or appliance during this process.

Pour rO(hfire les risques de dommages ou de
blessures h)rsque l'eau chaude n'a pas _t_
utilisee depuis deux semaines ou plus, ouwez

tousles robin ets d'eau chaude et laissez 1'eau

couler pendant plusieurs minutes avant

d'utiliser un appareil electrique raccorde au

syst_.me d'eau chaude. Vous _liminerez ainsi

l'hydrogbne qui pourrait s'y Otre accumule.

Puisqu'il s'agit d'un gaz inflammable, ne flnnez
pas ou n'utilisez pas une flamme nue au cours

de ce processus.

PROPER INSTAL LA TION AND MAINTENANCE

This dishwasher must be properly installed and

located in accordance with the Installation
Instructions before it is used. If you did not

receive an Installation Instructions sheet with
your dishwasher, you can receive one by calling

us toll-free in the USA, at the GE Answer Center_

800.626.2000. In Canada, call 1.888.880.3030.

• Connect to a grounded metal, perinanent
_dring system; or run an equipinenb

grounding ( onductor with the cir( uiI
conductors and connect to tile equipinent:
grounding terininal or lead of tile applian( e.

• Improper conne( tion of tile e/tuipment-
grounding condllclor call resuh ill a risk of

electric shock. Check with a qualified
electrician or service representative if you are
in doubt whedler die appliance is properly
grounded.

• Dispose of discarded appliances and shipping
or packing material properly.

• Do not attempt to repair or replace ally part
of your dishwasher unless it is specifically

recominended ill this manual. All odmr

servicing should be referred to a qualified
technician.

• To ininiinize tile possibili V of electric shock,
disconnect this appliance tiom the power
supply before atteinpting ally inaintenance.

NOTE: Turning die dishwasher off does not

disconnect tile appliance tiom tile power
supply. We recommend having a qualified
technician service your appliance.

INS T LA TION ET ENTRETIEN APPR OPRIE S

Avant de l'utiliser, vous devez installer

correctement ce lave-vaisselle conform6ment
aux directives d'installation fournies. Si vous

n'avez pas recu une feuille de directives

d'installation avec votre lave-valsselle, vous

pouvez en obtenir un exemplaire en t_l_phonant

sans frais au Centre de r_ponse GE des Etats-
Unis au 1.800.626.2000. Au Canada, composez

le 1.888.880.3030.

• (;el appareil dolt ,Stre relid 5un systbme de
cablage dle(:trique perinanent, inis ;_la terre.

Sinon, un fil de raise 5 la terre pour

appareillage dolt Otie installd el raccordd f_la
borne ou an fil de inise _'_la terre de l'appareil.

• Un raccordeinent non approprid du fil de raise
_'_la terie pour appareillage peru prdsenter des

ris/tues de chocs dlectriques. Sivous doutez de

la/tualitd de la raise _ la terre de votre

,51ectroin,Snager, (onsuhez un reprdsentant du

Service apic"s-vente ou un dlectricien/tualifid.

•.Jetez de la thcon appropride les vieux
dlectromdnagers, ainsi que le matdiiel
d'einballage el d'expd.dition.

•Ne temez pas de rdparer ou de remplacer tome
pi_?cede votre lave-vaisselle, f_moins que cela
ne soit spd.cifiquement recommandd dans le
prdsent guide. Confiez tomes les autres
i@aiations ;_un r@arateur qualifid.

•Afin de I'd&liI'e les ris/pms de chocs ,51ectriques,
ddbranchez toujours l'appareil avant de le
idpaier. REMARQUE : Lors/lue vous inettez

la coimnande &l lave-vaisselle 5 OFF (arrg't),
le courant/tui aliinente l'appareil n'est pas

coupd.. Nous vous recoimnandons de confier
la rdpaiation de votre appareil Z_un i@arateur
qualifia.

IMPORTANT SAFETY INSTRUCTIONS

MESURES DE SECURITE IMPORTANTES

WHEN USING YOUR DISHWASHER

p .P

Use this appliance only for its intended

purpose as described in this Owner's Guide.

• Use only powder, tabs or liquid detergents

or wetting agents recommended for use in a
dishwasher and keep them out of the rea(h

of children.

• Locate sharp items so that dmy are nol likely
to damage the door seal.

• Load sharp knives _dd_ d_e handles up to
redu( e the risk of (uHype injuries.

• Do not wash plastic items unless marked
dishwasher sqfi_or tl_e equivalent. Fox
plasti( items not so marked, check d_e

manutil( turer's re( ommendations.

• Non-Dishware Items: Do not wash items such
as elecuonic air cleaner filters, tnrnace filters
and paint brushes in your dishwasher. Damage

to dishwasher and discoloration or staining of
dishwasher may resuh.

• Do not touch the heating element &xring or
immediately atier use.

• Do not operate your dishwasher unless all

en( losure panels are properly in pla( e.

• ('.lose supervision is ne( essary if dfis applian( e
is used by or near children.

• Load light plasti( items so they will not
become dislodged and drop to the bottom of

the dishwasher-dmy might come into contact

with the heating element and be damaged.

READ AND FOLL 0 W THIS SAFE TY

INFORMATION CAREFULL Y,

SAVE THESE INSTRUCTIONS

LORSQUE VOUS UTILISEZ VOTRE LAVE-VAISSELLE

N'utilisez ce lave-vaisselle que pour l'usage • Arti( les divers : Ne lavez pas des arti( les
auquel il est desdn& comme expliqu_ dans le

present Guide d'ufilisation.

• N'utilisez que des d4tergents liquides, en

poudre ou en pastilles et les pro&xits de
rincage recommand_s pour lave-vaisselle.
Gardez tous (es produits hors de port('e

des enthnts.

• Plat ez les couteaux les poign(_es vers le
ham afin de r{'duire les risques de (oupures.

• Ne lavez pas d'arti( les en plastique dans le
lave-vaisselle, a moins qu'ils portent la

mention I(_vahleau I(_ve-vaisselleou tome
mention 6quivaleme. Lorsque les articles

de plastique ne portent au(une mention,
lisez les recommandations &x iilbricam.

comme les filtres _'_air Olectroniques, les filtres
de fournaise et les pinceaux dans votre lave-

vaisselle. Ils pourraient endommager le lave-
vaisselle et d('colorer ou tacher la (uve.

• Ne touchez pas a l'Ol,3mem chauflm_t pendant

ou imm,3diatemem apr_s le lavage.

• Ne tifites pas fimctionner votre lave-vaisselle

lorsque l'un de ses panneanx est enlev&

• I1 imxt exercer une ,3troite surveillance lorsque
vous tifites fimctionner le lave-vaisselle en

pr&en( e d'entimts.

• Pla( ez les articles Kgers en plastique de
i_Jcon qu'ils ne bougent pas ou ne tombem
au fi)nd de l'appareil pendant le lavage. Ils
pourraiem _tre endommag& s'ils entrent

en (ontact ave( l',3Kment chauflant.

VE UILLEZ LIRE E T S UIVRE f_ LA LE TTRE
CE S ME SURE S DE SE CUR ITE.

CONSERVEZ CES DIRECTIVES

Control Panel - ZBD5600

Dishwasher

You ca_ locate

your model

y_umber o_ the
left imside qi')'o_r

dishwasher tub.

Throughout this
manual, fi,atures

and appearance

ma)' vat)'/+'om

your model.

Control

Setting

OFF

NORMAL_BOOST

& &

HEATED HEATED
DRY DRY

Fq

Option Selections

FASTWASHI

Cycle Selections

RINSE & HOLD

SUPERWASH

NORMAL WASH

LIGHT WASH

D

1. OPTION SELECTIONS--Turn the dial either way to select an option.

BOOST

Provides extra heat in tile wash cycle to increase water temperature tot best
performance and is best used wifll heavily-soiled dishes. The timer will not advance

past DRY. Dishes air (hy naturally and energy is saved.

BOOST & Provides extra heat to increase water temperature fi)r best peril)finance and

HEATED DRY is best used with heavily-soiled dishes. Turns oil the heater for tast d+ying.

This cycle will extend the wash time by 21-38 minutes. NOTE: ( annot be

selected with RINSE & HOLD or FAST _,,\VkSHcycles.

NORMAL Shuts off tile drying heat option. The timer will not advan< e past DRY. Dishes

air d+y naturally and energy is saved.

NORMAL & Turns oil tile heater fi)r tast d+ying. This <)_clewill extend tile wash time by

HEATED DRY 16 minutes. NOTE: Cannot be selected with RINSE & HOLD or FAST

_,,\2_SH cycles.

OFF To cancel a wash cycle during operation, mrn this dial to the OFF position

and turn tile Cycle Selections dial to the end of tile selected program.

To interrupt/pause a wash cycle during operation, mrn this dial to tile OFF

position. To restart, mrn this dial to tile desired option.

2. CYCLE SELECTIONS--Turn tile dial clockwise to select cycle.

RINSE
& HOLD

SUPER

WASH

NORMAL

WASH

LIGHT

WASH

FAST
WASH

For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.

For heavily-soiled dishes or cookware with dried-on or baked-on soils.
Everyday dishes may be included. This cycle will not remove burned-on foods.

For loads of eve+yday dishes, glasses and cookware with medium soils.

F<>rlightly soiled eve_Tday loads.

For recently used, lighdy soiled loads to be washed in a short time.

Control Panel - ZBD5600

Dishwasher

Start a
wash load

l/Vhat

happens in

each cycle
based on the

NORMAL

Option

Selection
at 120°F.
inlet water

(;lose the door until it locks in place and turn the Options Selections dial to the desired setting.

Then turn the Cycle Selections dial to the desired setting to start the dishwasher. There is a time

delay bemeen slart:up and water fill while the timer is advancing. Thereti)re you will nol hear any

wash action right away.
To interrupt/pause awash cycle during operation, turn the Option Selections dial to the OFF position.

To restart, mrn this dial to the desired oplion.

CAUTION: Be (aretifl when opening the door. The hot steam that escapes when tlle door is
opened &Mng a cycle may (muse injuries. Stand back as you open tile door and allow tile steam

to escape.

ATTENTION :Failes attention lorsque vous ouvrez la porte. I_a_apeur brfllante qui s'dchappe

lorsque vous ouvrez la porte pendant un programme de lavage peut causer des brfllures.
Lorsque vous ouvrez la porte, reculez el laissez la vapeur s'achapper de l'appareil.

Cycles

RINSE & HOLD

SUPER ¥\2%SH

NORMAL X,\L_SH

Water Use

Gallons

(approx.)

1.7

8.4

6.7

(ycle Time

Minutes

(approx.)

10

76

7O

(ycle Sequence

tempera ture

Detergent

Usage
(;4¢ide

(Powder or

Liquid)

LIGHT X,\L_SH

FAST _,\2%SH

5.O

5.0

67

28

Times tor Optional Selections:

HL%TED DRY = 16 nfinutes
BOOST = 5-22 minutes, depending upon inlet water temperature and wash load selection.

SOFT WATER

0 3 grains

CYCI_ES
SUPER WASH

N()RMAL WASH
LIGHT WASH
FAST WASH

RINSE & H()LD

*12grains and up is extremely hard water. A water softener
is recommended. Wilhout it, lime can build up in the water
valve. The watei valve may stick and flooding could oCCtli.

Main Cup ()pen Cup Main Cup ()pen Cup

l_ull None lmll lmll
_ Full None lmll None
_ Full None Full None
_ Full None '_,Full None

Use no detergent

MEI)IUM WATER HARt) WATER

3 7 grains 7 12 grains*

Main Cup ()pen Cup

l*ull l*ull
l*ull l*ull
lmll None
Full Full

Use no detergent Use no detergent

NOTE: The above chart is a general guide, l)e/ergent
amounts should be adjusted depending on the am{rant
and lype of s{)il until salisfhct_)ry resuhs are achieved.

You ca_ locate

your model

y_umber o_ the
le/l imside o/your

dishwasher tub.

Throughout this

ma_ual, ,ibatures

a_d a/)fieara_ce

may va* 7 /}'om

you*" model.

Pre-Wash 0
Wash 0
Rinse 0

Dry 0
Clean 0

1

Cycle Statue

Indicators

Rinse&

Hold

I

Control Panel - ZBD5700 & ZBD5900

1)ishwasher

Fast

Wash

Cycle Selections Option Selections

Normal

Wash

I

Super
Wash

Heated

Dry

I

Water
Temp

Delay

Start

6

m 1

Clear

4

0

Cycle Status

Indicators

Control

Settings

--Fq

D 3 4 5 6

At the start of a cycle all Cycle Stares Indicators relevant to that program are ilhmfinated. As tile
program progresses, each Cycle Status Indicator switches off to show what stage of your wash has
finished. Your wash is complete when the CLEAN light is ilhmfinated.

All of the Cycle Stares Indicators will flash on and offif either the door is opened during a cycle or
if the cycle has been paused.

1. Cycle Status Indicators-This display tells you what is happening while the dishwasher is in operation.

PRE-WASH Displayed until the pre-wash periods me complete.

WASH Displayed until the main wash period is complete.

RINSE Displayed until rinse periods me complete.
DRY Displayed until dry period is complete (if HIL_TED DRY is selected).
CLEAN Displayed when _ycle is complete. IJght remains ONuntil the door is opened.

2. Cycle Selections--Press desired o, cle button, you _dll hear a beep and the light under the button _411
come ONindicatingyour selection. You may change this selection by pressing the
button ofthe newwash Q,cle wiflfin 15 seconds.

RINSE & For rinsing partial loads that will be washed later. Do not use detergent with
HOLD this cycle.

EAST For recently used, lightly soiled loads to be washed in a short time.

WASH

NORMAL For loads of eve_)_lay dishes, glasses and cookwme with medium soils.

WASH NOTE: For heavily soiled dishes, choose NORI_.£M,WASH plus ¥\2_TER TEM P

SUPER For heavil}_soiled dishes or cookware with dried-on or baked-on soils.

WASH Everyday dishes may be included. This tycle may not remove burned-on fi)ods.

3. HEATED DRY--When selected, turns tile (hying heater on fi)r filst (h):ing. This will extend the time

BOOST.

to your wash o,cle. When tiffs is NOT selected, the dishes air oh), naturally and energy
is saved. HL&TEI) DRY is not available on RINSE & HOI,I).

Control Panel - ZBD5700 & ZBD5900

Dishwasher

4. WATER TEMP--This option proxides exua heat to increase water temperature ti)r best perli)nnance.
It is used best _fith heavilpsoiled (fishes. This option cannot be used _fith RINSE & HOI D.

NORMAL--This is file detmflt seuing_wash and rinse water temperatures up to 149oF.
BOOST--This water temp selection pr_Mdes a wash and rinse with water temperatures up to 158°F.

SANI--This water temp selection pr_Mdes a sanitizing wash and rinse with water temperatures up to 171 °F.

NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-

Type Dishwashers [No. 96/011/480/2480] Requirements
for cleaning and sanitization of dishes, glasses and utensils.

5. DELAY START--This option will alh)w y{tu/o delay the start time of any wash _ycle except RINSE & HOI _D

ti)r up to 6 hours.

1. Select the delay stmt y{tu want by pressing the DEI AY START button. Multiple pressing will aherna/e the
delay time belween 2, 4 or 6 hours and OFF.

2. Select the wash _ycle you want. The DEIAY START light/liglns will flash to indicate time selected.

3.The flashing Cycle Stares Indicators show h{tw many hours will elapse betore washing begins.

Start a
wash load

6. CLEAR--If you wish to change the wash cycle after it has started or wish to turn the dishwasher offbetore the
wash finishes, it's simple. First pause the dishwasher by pressing the selected Cycle Selection

button, then press the CLEAR button. The dishwasher will then drain. You can now select a new
wash cycle if you want. If you don't, the dishwasher will drain and all Cycle Status Indicators will go

out. If you have selected a new wash cycle, remember to add more detergent to the detergent
compartment if required.

To start the dishwasher, close the (loot until it locks in place, push the desired Cycle Selection button, and

then select the desired Option buttons. There is a time delay belween star/-up and water fill so you will not
hear any wash action right away.

The (loot nmst be closed and latched into place to select a CYCI_E Selection or an option.

If the door is opened during a _ycle and left open, the dishwasher will beep once every nfinute until the (loot

is closed and latched into place.
To interrupt/pause a cycle, press the selected cycle button. The Stares Indicators will flash.

CAUTION: Be careful when opening the door; the hot steam that escapes when the door is opened may

cause injuries. Stand back asyou open the (loot and allow the steam to escape.

_ATTENTION : Faites attention lorsque vous otmez la porte. La vapeur br01ante qui s'_?chappe lorsque

vous ouvrez la porte pendant un programme de lax'age peut causer des brfilures. Lorsque
vous ouvrez la porte, reculez et laissez la vapeur s'dchapper de l'appareil.

To restart the wash process, close the (loot until it locks in place. Re-press the cycle button. There may be a

time delay of up to a ti_wnfinutes becm_se the water temperature needs to stabilize beti)re it starts the wash
cycle. During this time the DRY light will be on.

Tone
Silencing

10

You can prevent the beep flom sounding when selecting control settings.

1. Press the CLEAR and FAST WASH buttons together prior to selecting settings.

2. To have sound again, simply press the CLL4R and FAST _,,\2_SHbuttons together again.

Control Panel - ZBD5700 & ZBD5900

Dishwasher

Auto
Memory

Child
Lockout
Mode

What
happens in

each cyc#
based on the

NORMAL

WATER

TE MP

Your dishwasher has the ability to remember what options you like wifll any particular wash cycle.
This means flint if you select NORMAL WASH your dishwasher will automatically sele(t the
options that you sele(ted last time you washed _dfll the NORMAl. \,\2_kSHcy{ile.This memory
timction works with NORMAL _,\2_kSHand SUPER cycles. You can change tile options tllat have
been remembered with a particular wash {Tcle if you require.

NOTE: Pressing tile (;I+E_R buuon at fl_e end of a wash {:ycle does not imevlere _dfl_ tiffs
automatic memory tun( tion.

To reduce the possibility of children starting the dishwasher when unattended, a child lockout

feature can be enabled. Once enabled, each button must be pressed and held tor two seconds until

you hear a BEEP, before the dishwasher will respond.
This feature can be enabled by pressing both the ( I+EAR and RINSE & HOI+D buttons together

and holding both for two seconds. You will hear three BEEPS when the child lockout is enabled.

The child lockout can be cancelled by pressing the CI+EAR and RINSE & HOld) together and

holding both pressed for two seconds until a single BEEP is heard.
NOTE: Child lockout overrides tone silencing.

Water Use

Galhms

Cycles (approx.)

RINSE & HOLD

FAST WASH

(approx.)

1.7

6.1

Cycle Time

Minutes

Cycle Sequence

49

Option
Selection

at 120°F.
irdet water

temperature

Detergent

Usage
(h¢ide

(Powder or

Liquid)

NORMAI+ WASH

SU PER WASH

6.7

8.4

75

106

Additional Times tier Optional Selections:
HEATED DRY = 1 1 minutes

_,,\L_TERTEMP--BOOST = 6-51 minutes
X,\L_TERTEMP--SANI = 23-57 minutes

SOFT WATER

0 3 grains

CYCI +ES

SUPER WASH

N()RMAL WASH

FAST WASH

RINSE &"HOI,D

* 12grains and up is extremely hard water. A water sohener
is recommended. Wilhllul il, lime can build up in the water
valve. The waler valve may stick and llooding could occur.

Main Cup Open Cup Main Cup ()pen Cup

hill None Full Full

_,lqfll None Full None

!dqfil None Full None

Use no detergent

MEI)IUM WATER HARD WATER

3 7 grains 7 12 grains*

Main Cup ()pen Cup

lqfil lqfll
lqfil lqfll

lqfil lqfll

Use no detergent Use no detergent

NOTE: The above chart is a general guide. Detergent
amoun/s shoutd be adjusted depending on the alil!ltltlt

and lype of soil until salisfiLcm U results are achieved.

II

Using the dishwasher

Dishwasher

Water
Temperature

Use a Rinse

Agent

Tlle entering water must be at least 120°F. and

not more than 150 °F., i0r effective cleaning and

to prevent dish damage. Check tile water

temperature with a candy or meat thernmmeter.

A rinse agent improves dry per%rmance,

removes spots and prevents new film buil&up

on your dishes, glasses, flatware, cookware

and plasti(.

Fill tile rinse agent chamber by rotating tlle

round cap counterclockwise and remove. Fill

_hamber to nlaximum level. Replace and lock

the {ap into place.

To check if rinse agent is needed: a solid black

indi( ator indicates sufficient rinse agent; a (lear

indicator indicates a low level and requires

adding more rinse agent.

• A flfll dispenser shoukl last about one month.

Turn rm tile hot water Lmcet nearest the

dishwasher, place the thernmn_eter in a glass
and let tile water run cr)ntinurmsly imo tile

glass until the temperature stops rising.

•If rinse agent spills, wipe it up immediately.
It can keep your detergent tiom working.

• If after washing you notice cloudy spots,
streaks or water marks on tile glassware, and
tile rinse agent dispenser is not empty, it may

be necessa U to increase tile dispenser settings.
To do so, remove the cap and using a butter

kniie, rotate the indicator arrow to a higher

number. Replace tile cap when done.

• If glasses appear smeared or there is foam

present on the bottom of tile glasses or tile
bottom of tile machine, select a lower dosage

number.

Light level Indicator

Detergents

Use only detergent specifically made %r use
in dishwashers. Keep your detergent iiesh
and dry. Don't put powder detergent into the

dispenser until you're ready to wash dishes.

The amount of detergent to use depends on
whether your water is hard or soft. With hard

water, you need extra detergent. With soft
water, you need less detergent.

Protect your dishes and dishwasher by
contacting your water department and asking

how hard your water is. Twelve or more grains
is extremely hard water. A water softener is

recommended. Without it, lime {an build up
in tile water valve, whi(h (ould stick while open

and cause flooding. Too nmch detergent with
soft water (all (ause a pernlanent (loudiness of

glassware, {ailed etching.
To open tile detergent comparm_ent, push tile

lever latch inward.

Adjust to higher or lower number

You'll find two detergent dispensers on the
inside door of your dishwasher. All wash cycles

require detergent in tile main cup. Some wash
cycles require tile use of tile open cup. When
using automatic dishwashing detergent tabs,
place one tab in the main cup and close.

Be sure tile Cvcle Slams Indicators (on some
models) are not lit betore adding detergent.

Otherwise, the detergent cup will not close and
latch properly. Add detergent then close the

main cup.
NOTE: To open detergent cup after it has been

closed, push tile lever latch inward.

Main compartment

Open
cup

Lever

12

Loading the Racks

1)ishwasher

Upper Rack

Tile upper rack is for glasses, cups and saucers. (ups

and glasses fit best along the sides. This is also a secure
place for dishwasher-sate plastics.

The cup shelf may be placed in the up o1 doxm position
to add flexibility. The cup shelf can also secure wine

glasses at an angle tor best washability. Because wine
glasses come in various sizes, after loading, slowly push
in tile rack to make sure they will clear the top of the

dishwasher.

The upper rack is also fitted widl an a@lstable glass

support wire which can be positioned to secure tall
glasses or told down to fit larger items over it. You

may need to change tlle height of the upper rack,
depending on how tall your load is.

The upper rack is good tbr all kinds of oddb,-shaped

utensils. Saucepans, mixing bowls and od_er items
slmuld be placed face down.

Secure larger dishwasher-sate plastic items over two
fingers when possible.

Make sure small pktstic items are secure so d_ey can't
fall Ohm d_e heating element.

caFOlddown cup rack

n support extra cup

F01ddowncuprackcan

support glass stems

Adjusting

Upper Rack

Heigh, t

Upper

Wash
Tower

The upper rack can be raised or lowered to
provide extra room fin different sized items.

Empty the upper rack. Remove the rail pegs
in the tiont of the ra(k runners by squeezing
and lifting the top of the peg, then slide the

imk out.

Squeezeand lift peg
from rack runner

Take care not I1) obstruct the rotation of tile

spray arm under the upper rack or cover tile
water collector in d_e center of dm upper rack.

Re-insert the rack in the chosen position and
replace the pegs. Che(k that the spray arm is

fiee to rotate.

Re-adjust
upper rack

13

Loading the Racks

Dishwasher

tq_agurr,,sa*zda!a!aearct*z(,_+{/'rad_,sa*zd,silve_warr,ba,sl'eg,smay vau fi'om your model.

Silverware

Basket

Put flatware in tile removable basket with fi>rk and knife handles up to protect your hands. Place
spoons in the basket with handles down. Mix knives, forks and spoons so they don't nest together.
Distribute evenly. Small plastic items, such as measuring spoons and lids flom small containers,
should go in the bottom of the silverware basket with silverware on top.

Flip down covers can be lowered to secure lightweight items flom the effects of the vigorous wash
action. The slots in the covers can be used to separate silverware.

Don't let any item
extend through bottom

Lower Rack When h)ading the lower rack, do not load large platters

or trays in the front left corner. They may prevent
detergent flom circulating during the wash cycle+

The lower rack is best used fl)r plates, saucers, and

cookware. Large items such as broiler pans and
racks should go along the sides. Load platters, pots
and bowls along the sides, in corners, or in the back.

The soiled side of items should filce the center of

the rack+

Flip down covers can
be lowered to secure

lightweight items

Follow

these

_zidelines

Jbr loading

l Oplace

settings

14

Fr)ld-down fingers provide flexibility for extra large
and hard-to-fit items.

The fingers may be left in the up position or fl)lded

down to customize the lower ra(k.

U

and Cleaning

Dishwasher

Exterior

Interior

Protect
Against

Freezing

To clean the control panel use a lightly dampened cloth then dry thoroughly. To clean tile
exterior painted panels use a good appliance polish wax.

Never use sharp objects, s( ouring pads or harsh cleaners on any part of the dishwasher.
Use stainless steel cleaner on stainless steel panel. You tan order Stainless Steel Magic # WX10Xl5

through GE Parts in the USA, by calling 800.626.2002. In ( anada, call 1.888.880.3030.

Tile stainless steel tub (an be (leaned with Stainless Steel Magi( or a similar produ(t using

a (lean, soft cloth.

Wipe the rubber door seals occasionally, including the seal at the botton_ of the door.

Use stainless steel cleaner on stainless steel panel. You can order Stainless Steel Magic # WX l 0XI 5
through (;E Parts in the USA, by calling 800.{_2{_.2()02.In (;anada, call 1.888.880.3030.

If your dishwasher is left in an unheated place during tile winter, ask a service technician to:

1. Cut off ele( trical power to the dishwasher. Remove iilses or trip cir(uit breaker.

2. Turn off the water supply and disconne( t the water inlet line fiom the water valve.

3. Drain water iiom the water inlet line and water valve. (Use a pan to (arch the water.)

4. Reconne( t the water inlet line to the water valve.

The Air

5. Remove tile filters iiom the tub bottom and use a sponge to soak up water.

An air gap protects your dishwasher against
water backing up into it if a drain clogs. The air
gap is not a part of the dishwasher. It is not

covered by your warran U. Not all plumbing

codes require air gaps, so you may not have one.
The air gap is easy to clean.

1. Turn oJtt the dishwasher and lift oJtt the

( hrollle ( O', er.

2. Unscrex,. the plastic cap and clean v,ith
a toothpick.

Tw0t,00 0*IIIII/

air gaps 4,-i" ff'l,7_ _

7'o

Checkthe air gap any time your dishwasher
isn't draining well.

15

Ca and Cleaning

1)ishwasher

Removing

and Cleaning
the Spray

Arms and

Glasvs Tr@

Periodically remoxe and tlean d_e spray arms
m make sure dmt none of tlle nozzles haxe

be(ome blocked.
To remove the lower spray arm, grasp d_e

cemer of d_e spray arm and pull upwards, it will
un( lip. When replacing, make sure dm spray
arm is tnlly seated.

Tile plasti( cone on tile underside of tl_e spray
arm (an be deta( bed by uns(rewing it

couulerclockwise.

To remove the upper spray arm, carefldly
unscrew d_e spray arm flom the plastic tower.
To achieve this, hold the inner tower steady
and unscrew tl_e spray arm clockwise. To
replace d_e spray arm, carefldly screw tlle spray

arm coumerclockwise omo [lie inner lower.
To clean the upper and lower spray arms, rinse

diem under running water and make sure spray

nozzles are (lear.

The glass trap is located in tlle stainless steel
fiber at tl_e base of your dishwasher. The glass

trap is used to collect larger tbod items and
other foreign objects, which may be too big to

pass through the drain pump. For best wash
pertbrman( e, (heck die glass U:ap o( (asionally.

To remove the glass trap, m_istcoumerclockwlse,
rotate tl_e glass uap and liii. To clean the glass

trap, empU and rinse dloroughly. To replace,
reverse dmse steps ma_ng sure dm glass trap

locks imo place.

Pull up to remove

remove cone

Rotate counterclockwise
and lift to remove glass trap

16

The Wash

Filters

In addition to the glass trap, your dishwasher
has three fine filters-

• a two piece round perfi)rated stainless steel
filter located in tile base of the dishwasher.

• a finer mit ro-mesll filter lo(ated under tile
stainless steel filter.

• a super fine fiher lo(ated below the lower
spray arm.

Remove the stainless steel filter by first twisting
and removing tile glass trap. Lift out tile

stainless steel filter.

Attached to the underside of this filter is the
micro-mesh filter. To remove the mlcro-mesh

filter, squeeze the two (lips above the stainless

steel fiber to release the mi(ro-mesh.

f rip filter and lift

to remove

steeltilter
Perforated sta_

_ Micro-mesh filter

To remove the super fine filter, remove the

lower spray arm. Grasp tile super fine filter
around the outer edges. Remove by pulling
upwards, it will unclip. Unscrew tile tower

counterclockwise. Tile right half of tile stainless

steel filter can now be removed.

To clean filters, place m_der running water
and gently brush with a soft bristled brush.

Be careflfl not to deflnm filters while cleaning,

as this may prevent them from being properly
re-installed.

The super fine filter is self-cleanlng, there is
no need to clean it. This filter need only be
removed if you want to remove the right half

of the stainless steel filter.

Replace your filters in the reverse order,

starting with tile right half of the stainless

steel filter. Then screw in tile tower. Replace

the super fine filter over the tower by pressing
firmly on the outer edge until it (lips into
place and reposition the lower spray arm.

Reconnect the micro-mesh filter to the left

half of tile stainless steel filter prior to replacing
it ba(k into the dishwasher, Then replace the
glass trap. Ensure that all filters are repla(ed

_orre( tly for best resuhs.

Squeezeclips to remove
micro-mesh filter

filter up to remove

Pull super fine t

Lift stainless stee
filter to remove

17

Ca and Cleaning

1)ishwasher

Li h,t Bulb

Replacement

(0_t2 S0771e

models9

Water fill
level

The interior light bulb is located in the rear top right

corner.

To repla{ e-

l. Make sure the dishwasher is disconne( ted fiom tl_e

power supply.

2. Uns_ rew the plastic lens _oumer_ lo_kwise.

3. Remove d_e bulb and replace xdth a maximum 15 watt
bwonet bulb no larger than 1" in diameter and 2"

long. Order part # WD21X10055.

4. Make sure the seal is correctlyfitted to the plastic lens
and screw it firmly into place.

CAUTION: The plastic lens must be secured before
reconnecting power to the dishwasher.

a(_ATTENTION : 11faut remettre la lenfille de plasfique

en place avant de r6tabllr le courant au lave-valsselle.

For best performance, check tim water fill level of your
dishwasher.

Once the dishwasher is fiflly connected, run it tluough a
complete RINSE & HOLD cycle to ensure it is emptying
and filling correctly. For low water pressure situations run
the RINSE & HOLD cycle 3 times. Halfway tluough the
final RINSE & HOLD cycle, pause the dishwasher and

check the water level inside the dishwasher. If the water
level is not above the minimum water level (marked on the

lower spray support tower), increase the fill level.

Uescfew lens in a

counterclockwise

.... direction

Light bulb __

Plastic lens

Maximum _m level

18

For Model ZBD5600--Remove the flont kickplate and
(hange the Fill Time s_ft(h setting.

For Model ZBD,t tO0 and ZBD5900--

1. Ensure the dishwasher is not running tlnough a cycle.
Depress the WATER TEMP button for ten seconds

until the se(ond buzzer sounds.

2. Press the CI,L_R button to select fill time, as pet chart
(80 seconds is the factory setting).

3. To test time, press DEI,AY START. The dishwasher

will start filling. Listen for the dishwasher to complete
filling. Once filled, the fill level must be checked to

ensure fill time is correct.

4. Once complete, press the WATER TEMP button to

exit fill time mode.

Continue to press the

CLEAR button until the desired

indicator is illutninated.

(ycle Status

Indicators

PREA,\%SH

_,,\L*_SH

RINSE
DRY
(I,EAN

Fill time

75 seconds
80 seconds

90 seconds
100 seconds
110 seconds

Optional Accessories

Dishwasher

Change the

Dishwasher _
Appearance for

ZBD5600 and
ZBD5 700 only

You can change the door panel appearan(e

of yore dishx_asher by ordering one of these
optional accessories:

• l/4" Wood Panel Trim Kit
ZPF25B (Black)

ZPF25W (White)

• 3/4" Trimless Panel Kit
ZPF75B (Black)

ZPF75W (White)

These accessories are axailable at extra cost by
calling in tl]e USA, 800.626.2002. In Canada,

call 1.888.880.3030.
Spe( ifi_accesso U number when ordering.

19

Before You Call For Service

Dishwasher

Questions ?

Use this

problem

SOlVer

PROBLEM POSSIBLE CAUSE WHAT TO DO

Cycle Status Indicators Time to() long between .Each btuton must be touched _dthin
(on some models) go breton sele( (ion 15 seconds after touching another control.
off"when you're setting

Unusual noises Some of the sounds you

will hear are normal

• Timer advan( ing as cycle progresses.

• Detergem cup opening.

• Water draining out of (lie tub immediately

after you tou(h a button.

Utensils are not secure .Make sure everything is se(med in
in (lie rack or somedfing dishwasher.

small has dropped into
the rack

Detergent left in
dispenser cups

Water won't pump

out of the tub

Suds in the tub

Dishes are blocking tlle .Reposition tim dishes.
detergent (ups

Drain is clogged

Correct detergem
wasu't used

•If you have an air gap, clean it.

•Check to see if your ldtchen sink is draining

well. If not, you may need a phnnber.

•If tlle dishwasher drains into a disposer,

run disposer clear.

•Use only automatic dishwasher detergems

to avoid sudsing.

2O

Dishes and flatware
not clean

Too much riuse
agent used

Inlet water temperature
is below 120°F.

Water pressure is
temporarily low

Air gap is (;logged
hnproper rack loading

•To remove suds l_om (lie tub, open the

dishwasher and let suds evaporate. Add
1 gallon of (;old water to die tub. (;lose the

door until it locks imo place. On models
ZBD5700 and ZBD5900, pump out water

by pressing the NORMAL WASH button.
Wait one relume and press N()RMAL

WASH again, then press CLEAR. Repeat if
necessavv. On model ZBD5600, turn the

Cycle Selection dial to NORMAL WASH.

Wait one minute. Allow water to pump out.

Repeat if necessa U.
See tlle Rinse Agem section.

•Raise d,e water heater temperature to 120°F.

•Depending on model, use X'\2a_TERTEMP

BOOST or X\L_TER TEMP SANI option.

•Turn oi1 a tmlcet. Is water coming out more

slowly than usual? If so, wait until pressure is
normal before using your dishwasher.

•Clean the air gap.

•Make sure large dishware does not blo(k
the detergent dispenser or the wash arm.

@estions ?
Use this

problem

SO[VeV

PROBLEM POSSIBLE CAUSE WHAT TO DO

Spots and filming on
glasses and flatware

Extremely hard

water

Low inlet water
temperature

Overloading tile dishwasher

•Use a rinse agent to remove spots

and prevent new film buikl-up.

•To remove stubborn spots iiom glassware:

1 Remove all metal utensils flom tile

dishwasher.

Cloudiness on
glassware

Improper loading
Old or damp powder

detergent
Rinse agem dispenser

empV
Too little detergent

Combination of soft

water alld too illll( h

detergent

Extended exposure
to high temperature

water

2 Do not add detergent.
3 Select tile NORMAL WASH cycle

and HEATED DRY option.

4 Start the dishwasher and allow to run

until tile main wash.

5 Open tile door and pour 2 cups

(500 ml)ofwhite vinegar into the

bottom of tile dishwasher.

(;lose the door and allow to conlplete
the cycle. If vinegar rinse doesn't

work: Repeat as above, except use

1/4 cup (60 ml) of citric acid crystals
instead of vinegar.

•This is (:ailed etching and is permanent.

To prevent this flom happening, use less

detergent if you have soil water.

Wash glassware in the shortest cycle that
will get them clean.

•Lower the water heater temperature.

Black or ,gray •Remove marks with a mikl, abrasive
marks on dishes (leaner.

Dishes don't dry

Ahmfinum utensils haxe
rubbed against dishes

Low inlet water
temperature

•Make sure inlet water temperature is

(orre(Tt.

•Depending on your model select WATER
TEMP B()OST & HEATED DRY or WATER

TEMP SANI and HEATED DRY options.

Rinse agent dispenser

•Check tile rinse agent dispenser.

is empty

Dishwasher won't run

Fuse is bl(mu, or the
circuit breaker tripped

•Replace fllse or reset circuit breaker. Remove
any other applian( es from the (ir(uit.

•Try reseUing.

21

Before You Call For Service

Dishwasher

@estions ?
Use this

problem

SO[7)eT

PROBLEM POSSIBLE CAUSE

Dishwasher won't start

Door not properly closed
Power supply not

connected.
Child I,ockout mode is

selected

Door opened during
cycle when water is hot

Timer not set to start of
wash cycle

All Cycle Status

Dishwasher is paused

Indicators flashing
or beeping every 30

seconds (on models

Door not properly closed

ZBD5700 and ZBD5900)

Flashing SUPER WASH

light (on models

Inlet water temperature
is greater than 175°F.

ZBD5700 and ZBD5900)

Motor starts but water
doesn't enter dishwasher

(Flashing FAST WASH)
(on models ZBD5700

and ZBD5900)

Program taking too
long or not advancing

properly (Flashing

NORMAL WASH light)
(on models ZBD5700

and ZBD5900)

Water supply valve
turned off

Low inlet water
temperature

WHAT TO DO

•Press door until it clicks shut.

•Check dishwasher is plugged in and

sx_Jtch is on.

•Press and hold desired button for two

seconds. See Child Lockout mode section

fin: models ZBD5700 and ZBD5900.

•Relatch door. Wait a ti_wminutes,

dishwasher will restart automatically.

•Turn to Cycle Selection starting position
and Option dial to desired position.

•To restart the wash, press the selected
wash button.

•Press door until it clicks shut.

•Reduce hot water inlet temperature to

below 150°F.

•Check water supply _dve.

•Allow time to heat water (up to one hour).

•Check inlet water temperature.

•Conne( t to hot water supply.

Water does not empty

out of dishwasher
(Flashing RINSE llght)

(on models ZBD5700
and ZBD5900)

Dishwasher continues to
drain (Flashing temp

light) (on models
ZBD5700 and ZBD5900)

Yellow color on dishes

and glassware

22

Outlet blocked

Incorrect fill level or
fill time

Water has iron or other
mineral content

•Check outlet hose for kinks and sharp
bends.

"Check and (lean the drain pump filter.

•Clmck sink trap, garbage disposal and air

gap for blockage.

•Check fill level. See Water Fill I_evel

section.

"(;all for service.

•A special filter in the water supply line
is the only way to correct this problem.

Conta(t a water soiiener company.

Questions ?
Use this

problem

SO[T Jet

PROBLEM POSSIBLE CAUSE WHAT TO DO

White film on glasses,

tea and coffee stains

Brown spots or pitting
of stainless steel and

tarnishing of silver

Hard water

Repeated use of Sani
option

Consistendy low water
level in dishwasher

•Try progressively increasing the Rinse Aid

selling t() 6. See d*e Rinse Agent section°

•Dis( ominue use of Sani option.

•Check operating water level is between

tl_e MIN. and MAX. indi( ators on lower
spray arm support tower. See Care and

Cleaning se( tion.

Electrolysis fi)llo-_dng

(Otlla( I Wilh oilier illelals

Detergent thrown over

dm cmlery or smwepans

•Wash scratched or worn pieces by hand.

Polish silverware witl_a silve>plate cleaner.

•Load detergent properly. See Using tl_e

Dishwasher se( tion.

23

Consumer Services

Dishwasher

With the purchase of your new Monogram appliance, receive the

assurance that if you ever need information or assistance from GE,

we'll be there. All you have to do is call-toll-free!

GE Answer
Center ®

hi the USA :

800.626.2000

In -Home

Repair Service

In theUSA:

800.444.1845

In Canada:

1.888.880.3030

For Customers

With Special

Needs...

hi the USA :

800.626.2000

Whatever your question about any Monogram major appliance, GE Answer Center:
information service is available to help. Your (all-and your question-will be answered

prompdy and courteously. And you tan call any time. GE Answer Cemer: servi( e is open
24 hours a day, 7 days a week.

In Canada, call 1.888.880.3030.

A GE consumer service proIessional will provide expert repair service, scheduled at a time
dmt's conveniem for you. Many GE Consumer Service companDopermed locations offer you

service today or tomorrow, or at your convenient e (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m.
to 2:00 p.m. Saturdays). Our iht tory-uained technit tans know your appliance inside and ore--

so most repairs can be handled in just one visiL

............71 I /I I _

GE offers Braille _omrols fi)r a xariety of (;E applian_ es, and a

brodmre lo assisl in planning a barrier-tiee kil( hen for persons
wid_ limited mobility.

Consumers with impaired hearing or speech who have access to a

TDD or a (onvenfional Ielelypewriter may call 800.TDD.GEAC

(800.833.4322) It) requesl infi)rmafion or service.

Service

Contracts

In theUSA:

800.626.2224

In Canada:

1.888.880.3030

Parts and

Accessories

In theUSA:

800.626.2002

In Canada:

1.888.880.3030

24

You (an have d_e secure teeling dlat GE Consumer Service will still be dmre after your
warranty expires. Purchase a GE comra( t while your warranty is still in effect and you'll

receive a substantial discounL Wid_ a multiple-year ( ontracL you're assured of flmlre
service at today's pri{ es.

Individuals qualified to service their own appliances can have parts or accessories sere directly
to their home. The GE parts system provides access to over 47,000 parts...and all GE Genuine
Renewal Parts are tully warranted.

User maintenance instructions contained in this guide cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Warranty fbr customers in the USA

Dishwasher

YOUR MONOGRAM DISHWASHER WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase

date is needed to obtain service under warranty.

WHA T IS

COVERED

From the Date

of the O_qginal

Purchase

ONE-YEAR

Any part of the dishwasher which thils due to a defect in materials or workmanship. During this

full one-year warranty, GE will also provide, free of charge, all labor and in-home service to
replace the deii_c rive part.

Second Year

Any part of the dishwasher which thils &le to a defect in materials or workmanship. During this

second-year limited warranty, you will be responsible for any labor or in-home se_'i( e costs.
Five Years

The dishwasher rack, if it should rust, or the electronic control module if it should tail due to a
defect in materials or workmanship. During this five-year limited warranty, you will be responsible
for any labor or in-home service costs.

Lifetime
The stainless steel tub or door liner, if it fails to contain water due to a defect in materials or

workmanship. During this full lifetime warranty, GE will also provide, free of charge, all labor
and in-home service to replace the defective part.

tD@@@@@@@@@@@@@@@@@@@@@@OO@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ O

This warranty is extended to the original purchaser and any succeeding owner ibr pro&l( ts
purchased ibr ordina U home use in the 48 mainland states, Alaska, Hawaii and Washington, D.C.
Proof of original purchase date is needed to obtain service under the warranty.

All warranty service will be provided by our Factory Service Centers or by our authorized
Customer Care < servicers during normal working hours.

Should your appliance need service, during warranty period or beyond, (:all 800.444.1845.

WHA T IS NOT
COVERED

• Service trips to your home to teach you how to
use the product.

Read your Use and Care material.
If you then have any questions about

operating the product, please contact your
dealer or our Customer Relations oltice at the

address below, or call, toll tiee:
GE Answer Center ®

800.626.2000
consumer information service

• hnproper installation.

• Replacement of house fuses or reselling

of circuit breakers.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary tiom state to state. To know what your legal
rights are in your state, (onsuh your local or state consumer aithirs otiice or your state's Attorney

General.

Warrantor: General Electric Company. If further help is needed concerning this warranty, write:

Manager--Customer Relations, GE Appliances, Louisville, KY 40225.

• Failure of the product if it is abused, misused,
or used fin other than the intended purpose
or used commercially.

• Damage to product caused by accident, fire,
floods or acts of God.

• Incidental or consequential damage to
personal proper U caused by possible defects

with this appliance.

• Cleaning or servicing of the air gap device in
the drain line.

WARRANTOR IS NOT RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.

25

Warranty fbr customers in Ca ada

Dishwasher

n

YOUR MONOGRAM DISHWASHER WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase

date is needed to obtain service under warranty.

WHA T IS
COVERED

From the Date

of the Original

Purchase

ONE-YEAR

Any part of the dishwasher which rims due to a defect in materials or workmanship. During this

full one-year warranty, (;E will also provide, free of charge, all labor and in-home servit e to
repla(e tl_e dete(tive part.

Second Year

Any part of the dishwasher which fails due to a defect in materials or workmanship. During this

second-year limited warranty, you will be responsible ti)r any labor or in-hon_e se,_i(:e costs.
Five Years

The dishwasher rack, if it should rust, or the electronic control module if it should iidl due to a
deiect in materials or workmanship. During this five-year limited warranty, you will be responsible

for any labor or in-home service ( osts.
Lifetime

The stainless steel tub or door liner, if it fails to contain water due to a deie(:t in materials or
workmanship. During dds full lifetime warranty, (;E will also proxide, free of charge, all labor

and in-home service to repla( e the defe( rive part.

o@@@®@@@@®@@@@®@@@@®@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ o

This warranty is extended to the original purchaser and any succeeding owner %r products
purchased for ordinary home use in Canada. Proof of original put( base date is needed to obtain
service under the warranty.

All warranty servi( e Mll be provided by our Factory Servi( e Centers or by our authorized
Customer Care < servicers during normal working hours.

Should your applian( e need servi( e, during warranty period or beyond, (all 1.888.880.3030.

WHA T IS NOT
COVERED

26

• Servi( e trips to your home to teach you how to
use the produ( t.

Read your Use and Care material.
If you then have any questions about

operating the pro&_ct, please contact your
dealer or our Consumer Relations office at

the address below, or tall, toll flee:

1.888.880.3030

• huproper installation.

• Replacement of house fllses or reselling of
(ir(uit breakers.

• Failure of the pro&let if it is abused, misused,
or used fi)r other than the intended purpose or
used commercially.

Some provinces do not allow the exclusion or limitation of incidental or (onsequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal

rights, and you may also have other rights whi(h vary flom province to province. To know what
your legal rights are in your province, consuh your local or provincial (onsumer aflhirs ofli( e.

Warrantor: Camco Inc. If further help is needed concerning this warranty, write: Manager,

Consumer Relations, Camco Inc., 1 Factory Lane, Suite 310, Moncton, N.B. E 1C 9M3.

• Damage to product caused by accident, fire,
floods or a(ts of (;od.

• Incidental or ( onsequential damage to
personal property (aused by possible deiects
with this applian( e.

• Cleaning or sel_'king of the air gap devi(e in

the drain line.

WARP,ANTOR IS NOT RESI ONSIBLE FOR
CONSEQUENTIAL DAMAGES.

)

X_po& l!_Zl/__umaodmI

uo.n_x!.s_a_I d.utsaau_ 0

!anpoa d aaumsuo D

saoue!lddv39

IIIII

Place
I st Class
I,etter

Stamp
Here

General Electric Company

Warranty Registration Department

P.O. Box 32150
Louisville, KY 40232-2150

..................................................................................................................... J

27

Consumer Product Ownership Registration

Dear (_uSlOlilei:

Thank you for purchasing our produt t and thank you for plating your (tmfidente in us. We are proud to

have yOH as a cuslolilei!

Follow these three steps to protect your new appliance investment:

your Consumer

Product Ownership
Registration today.

Have the peace of mind
Ot kl-lowinu- we can

contact you in the
unlikely event of a

satety modification.

O

After completing this
registration, write your

model and serial numbers
in this grade. You will need

this intormation should

you require service, The

service nmnber in the
USA: 800,444.1845. In

Canada: 1.888.880.3030.

Read your "Use and (;are
Guide" carefully. It Mll

help you operate your
new appliance properly.

If you have questions, or
need more information

in the USA, call the
GE Answer Center ®

800.626.2000. In Canada
call 1.888.880.3030.

Important: To ensure that your product is registered, mail the separate product registration card.

If the separate product registration card is missing, fold and mail the form below. No envelope is needed.

F()IJ) HEllE

Consumer Product Ownership Registration

Dishwasher

Product Model Serial

I' astI I

First

Name

Street

Address

Nil. [] Ms. [] Mrs. [] Miss []

i i i i i i i i i Nan]e i i i i i i i i i i i i i i

I I I I I I I I I I I I I I I I I I I I I I I I I I I

Apt. #

(;it?

Dale Plated

[n Use

Month

I I I I I I I i

' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' Istate[-.._()(_)dei I I I I I

_ Mono#ram®

General Electric Company
Louisville, KY40225

l)ay I I I Year I I I

l'hor_e i-I,, I-i i i i I

Nm-n )er I I

TAI'E CI_()SEI)

PaR No. C82 0046X Issue A
PaR No. 165D4700P208
Pub N0.49-5882
4-00 JR

Printed in the United States