GE JXCK89 User Manual

Page 1
Range Accessory Guide
GE Profile™and GE
®
The maximum in cooking performance and versatility.
We bring good things to life.
designer hoods • telescopic downdraft systems • high-performance hoods • backguard kits • venting kits • du
Page 2
2
Backguard kits – coil and gas ranges
Contains reversible end caps, screws and installation instructions
for an easy custom built-in appearance.
End cap kit
Used when installing slide-in range models into a countertop
that has been previously notched for front end caps. The standard flush front end caps on the range can be replaced with the notched end caps in the kit. The kit contains right and left end caps and installation instructions.
Maintop rear ller strip kit
The strip kit fills in the gap at the rear of the range for a more flush
custom appearance. Kit color should match color of range, not color of cooktop.
Note: Gas sealed burner models JGSP44 and JGSP23 are shipped with a “vented” rear filler trim kit.
Slide-In and Drop-In Ranges
GE PROFILE™AND GE®RANGE ACCESSORIES
Installed with counter backsplash
Note: Endcap overlaps countertop backsplash.
30" Electric coil Slide-in and Drop-in and gas Slide-in ranges
(Models: JSP34,
JSP26, JSS26, JSS16, JGSP44 and JGSP23)
JXS31–White JXS32–Brushed-chrome JXS33–Almond JXS34–Black JXS35–Bisque
27" Electric Drop-in ranges
(Models: JMP31, JMP28 and JMS08)
JX27RWH–White JX27RBK–Black
Backguard kits – smooth-top ranges
Designed for slide-in models when replacing a free-standing range,
this kit is used when the countertop is cut all the way to the wall.
30" Electric CleanDesign Slide-in and Drop-in ranges
(Models: JS966/968, JSP56/57,
JSP46/47, JD966/968 and JDP46/47)
JXS39SS–Stainless steel JXS36WW–White JXS36CC–Bisque JXS36BB–Black
30" Electric coil Slide-in and gas Slide-in ranges (Models: JSP34, JSP26, JSS26, JSS16,
JGSP44 and JGSP23)
JXS40–Chrome
30" Electric CleanDesign Slide-in and Drop-in ranges
(Models: JS966/968,*
JSP56/57,* JSP46/47,* JD966/968 and JDP46/47)
JXS66WW–White*** JXS66CC–Bisque*** JXS66BB–Black***
30" Electric coil Slide-in and Drop-in ranges**
(Models: JSP34, JSP26, JSS26, JSS16)
JXS62BB–Black JXS63WW–White JXS64AA–Almond
Installed without counter backsplash
JXS65CC–Bisque JXS28–Brushed-chrome
*Shipped with range.
**Kit contains three widths of ller strips, clips, screws and installation instructions.
***Not required if countertop is cut as specied in installation instructions.
Shown in free-standing
cutout without backguard
kit–note gap behind
cooktop
Range has been pulled away from countertop in photo to better illustrate end cap installation.
Page 3
3
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS56WW–White JXS56CC–Bisque JXS56BB–Black
30" Electric coil Slide-in and gas Slide-in ranges
(Models: JSP34, JSP26, JSS26,
JSS16, JGSP44 and JGSP23)
JXS52BB–Black JXS53WW–White JXS55CC–Bisque
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS86WW–White JXS86CC–Bisque JXS86BB–Black
30" Electric coil slide-in and gas Slide-in ranges
(Models: JSP34, JSP26, JSS26,
JSS16, JGSP44 and JGSP23)
Pub. No. 3-A040
30" Electric CleanDesign Slide-in ranges
(Models: JS966/968, JSP56/57 and JSP46/47)
JXS76WW–White JXS76CC–Bisque JXS76BB–Black
Lower trim kit – slide-in ranges
Color-matched toekick is designed to be used when the range
needs to be raised to the highest position to accommodate thick countertop material such as tile or granite. Kit also includes extended leveling legs and instructions. Use kit when countertop height is 36-1/2" to 38" high.
Lower trim kit – drop-in ranges (not shown)
When a drop-in is installed in an existing cutout greater than
27-1/4" from the counter to the cabinet crossrail, a lower trim kit should be used to ll the gap at the bottom of the range. Kit dimensions 30" wide x 4" high.
Vertical side trim kit
These side trim extensions are used to close the gaps between
a slide-in range and adjacent base cabinet (up to 3/16" each side). Kit contains two side trim pieces and installation instructions.
Body side kit
These side panels are used when one side of the slide-in range
is exposed. Kit contains one body side and installation instructions. For free-standing application, two kits are needed. Total installed range width would be 31-1/4" when two side panel kits are used.
After trim kit
Before trim kit
After trim kitBefore trim kit
30" Electric CleanDesign, Coil and Drop-in ranges
(Models: JD966/968, JDP46/47, JDP39, JDP36 and JDS26)
JXS96WW–White JXS96CC–Bisque JXS96BB–Black
Page 4
4
GE PROFILE™AND GE®RANGE ACCESSORIES
Optional modules for electric Select-Top™cooktop
Customize your cooktop to suit your taste and convenience.
30" Dual modular and single modular (Models: JP389 and JP385 are shipped without any modules)
(JP380 – Grill cover only)
Optional modules for gas modular cooktop
Choose optional modules that are tailored to your needs.
30" Single modular (Model: JGP389)
Grill Module JXDL44LN
Grill Cover JXDM3
White
JXDM2–Black JXDM4–Black (for
JP380 patio grill only)
Griddle Module JXDD44R
(use with
optional grill)
Ribbon Module JXDR50VW
White
JXDR50VB–Black
Coil Module JXDC44RWH
White
JXDC43RBL–Black
Gas Griddle Module JXGL89
(use with
optional grill)
Gas Grill Cover JXGC89W
White
JXGC89B–Black
Two-Burner Gas Module JXGB89W
White
JXGB89BBlack
Cooktops
Gas Grill Module JXGG89
Universal Griddle
This non-stick, professional griddle ts all electric smooth top
ranges, cooktops, electric bridge elements and gas ranges.
ZX375
Page 5
5
Cooktop ller trim kit
When replacing older* GE 30" electric cooktop models with a
newer GE electric cooktop, use this one-piece trim to ll in oversize hole left by older cooktop. Kit contains one-piece trim and installation instructions.
30" Electric CleanDesign cooktop
(Models: JP938, JP930, JP350, JP340 and JP326)
JXTR31W–True white JXTR31C–True bisque JXTR31B–Black (use with black glass cooktops
with a white, bisque or black pattern)
*Before 1991
Flush mount trim kit
For installation of a cooktop ush or recessed into the countertop.
Kit contains template, instructions, reective foil and color-matched sealant.
36" and 30" Electric CleanDesign cooktop
(Models: JP968, JP960, JP938, JP930, JP350 and JP340)
JXFLMTW–True white JXFLMCC–True bisque JXFLMBB–Black (use with black glass cooktops with a white, bisque or black pattern)
Not for use with stainless models. Photo shows “flush” installation. When installed, no part of the kit is visible except the color-matched sealant.
Special offset adapter
For rear wall venting installations on gas and electric downdraft
cooktops when transitioning from a rectangular to a round duct.
30" Electric and gas downdraft cooktop
(Models: JP989 and JGP989)
JXRW89
Required venting kit
Motor, blower and downdraft housing assembly required for
JGP656 integrated downdraft gas cooktop with vent controls on the cooktop adjacent to the burner controls.
36" Integrated downdraft gas cooktop
(Model: JGP656)
JXBA56WW–White JXBA56BB–Black
Page 6
6
Chimney cover – designer hoods
Covers exposed duct work running from the hood to
ceilings greater than 8'. Fits both 30" and 36" models.
Commercial baffle filter kit – designer hoods
Heavy-duty commercial style lters can be used in place of
household lters shipped with the designer hood.
Optional damper accessory
Round damper kit allows a high-performance hood to fit
a standard 7" round duct.
Ventilation
GE PROFILE™AND GE®RANGE ACCESSORIES
30" and 36" designer hoods
(Models: JV966, JV965, JV936 and JV935)
JCCHSS–Stainless steel JCCHWW–White JCCHCC–Bisque JCCHBB–Black
30" and 36" designer hoods
(Models: JV966, JV965, JV936 and JV935)
JXBF36SS–36" JXBF30SS–30"
High-performance and performance hoods
(Models: JV666, JV665, JV636, JV635, JV566, JV536, JV565 and JV535)
JXDA23
Duct transition kit – designer hoods
For designer hoods, 7" round duct to 3-1/4" x 10" rectangular
duct transition for rear wall discharge.
30" and 36" designer hoods
(Models: JV966, JV965, JV936 and JV935)
JXDW1
Page 7
7
Deluxe hoods (Models: JV347 and JV327) JXDA22
Optional damper accessory
Allows a deluxe and standard hood to t a standard 7" round duct.
Outdoor remote installation kit – telescopic downdraft system
Allows the blower motor to be mounted remotely to an outside
wall with a protective weather cover. Blower motor is mounted inside the weather cover and the blower does not take up space inside kitchen cabinet. This ensures noise and vibration are not present inside the kitchen. Kit includes: Damper, junction box, blower mounting, weather cover and mounting hardware. For use with JVB67, JVB37 and JGP656.
JXBC57
Indoor remote installation kit – telescopic downdraft system
Allows the blower motor to be installed remotely indoors.
For use with JVB67, JVB37 and JGP656 only.
JXRB57
Cord kit – hoods
Allows range hoods to be installed with a plug and receptacle
instead of being hard-wired. This is ideal when the builder or homeowner wants to upgrade to an Over-the-Range (OTR) Spacemaker
®
microwave hood. By using this optional installation method and a separate 15 amp circuit, there is no need to have an electrician return to the home/job site when an OTR is installed.
JXHC1
Page 8
8
GE PROFILE™AND GE®RANGE ACCESSORIES
Deluxe built-in trim kit: 2.1 and 1.8 cu. ft. models
Allows the 1.8 countertop microwave oven to be installed in a wall
or cabinet alone, or over a GE
®
27" or 30"single electric wall oven
as shown.
Deluxe built-in trim kit: 1.6 cu. ft. models
Allows the 1.6 countertop microwave oven to be installed in a wall
or cabinet alone, or over a GE 30" or 27" single electric wall oven as shown.
Deluxe trim kit: 1.5 cu. ft. Profile™models
Allows the 1.5 countertop microwave oven to be installed in a wall
or cabinet alone, or over a GE 30" or 27" single electric wall oven, or a convection wall oven for a complete convection cooking center.
Built-in trim kit: 1.0 cu. ft. models
For a custom built-in appearance, this kit allows the Spacemaker II
microwave oven to be installed into a wall or cabinet alone.
Hanging kit: .6, .7 and 1.0 cu. ft. models
This hanging kit allows installation under a cabinet.
Microwave Oven Trim Kits
30" Deluxe trim kits
(Models: JE1660)
JX1530MWW–White JX1530MBW–Black
27" Deluxe trim kits
(Models: JE1660)
JX1527MWW–White JX1527MBW–Black
30" Deluxe trim kits (Model: JE1590) JX1530CSC–Stainless steel
JX1530CWC–White JX1530CCC–Bisque JX1530CBC–Black
27" Deluxe trim kits (Model: JE1590) JX1527CSC–Stainless steel
JX1527CWC–White JX1527CCC–Bisque JX1527CBC–Black
27" Trim kits (Models: JEM31 and JEM25) JX827SS–Stainless steel
JX827WN–White JX827CD–Bisque JX827BN–Black
Hanging kit (Models: JE620, JE740, JE610,
JEM25 and JEM31)
Pub. No. 4-A019
30" Deluxe trim kits 27" Deluxe trim kits
(JE1860/JE1840) (JE2160) (JE1860/JE1840) (JE2160)
Stainless steel JX1830SB JX2130SS JX1827SB JX2127SS White JX1830WB JX2130WW JX1827WB JX2127WW Bisque JX1830CB JX2130CC JX1827CB JX2127CC Black JX1830CB JX2130CC JX1827BB JX2127BB
Page 9
9
Wok holder
Made of black porcelain cast iron, this accessory sits on the
grate of the maximum output burner to hold a traditional round-bottom wok. Wok is
not included.
(Models: JGP960, JGP930, JGP636, JGP336, JGSP44, JGB920, JGB910, J2B900, JGBP90, JGBP86, JGBP85, JGBP79, JGBP35 and JGBP30)
JXWK
(Models: JGP963, JGP962, JGP933 and JGP932)
JXWK2
Accessory pan kit
For use with 30" and 27" warming drawers. Set includes five
commercial pans that are 4" deep. Each pan includes a stainless steel lid.
(Models: JTD910/915 and JKD910/915)
JXPN1
Demonstration cord kits (120 volt)
Built-in wall ovens and drop-in ranges
For use with 30", 27" and 24" single/double wall ovens and
drop-in ranges with electronic controls. Provides power to the controls, convection fan, and lights, but will not energize heating elements. Kit contains one cord, wire nuts, electrical tape and instructions.
Pub. No. 3-A011
Free-standing and slide-in electric ranges
For use with 30" free-standing electric and slide-in electric
ranges with electronic controls. Provides power to the controls, convection fan, and lights, but will not energize heating elements. Kit contains one cord and instructions.
Pub. No. 3-A029
3-A011
3-A029
3-A050
Miscellaneous
Electronic cooktops
Provides power to all controls, but will not energize heating
elements. Kit contains one cord, wire nuts, electrical tape and instructions.
For use with JP968 and JP938 only.
Pub. No. 3-A050
Page 10
10
GE PROFILE™AND GE®RANGE ACCESSORIES
Adjacent Cabinet Or Final Location Of Range Side Panel
Wall
Floor-Wood
Bracket Side
Rear Leveling Leg
Floor-Concrete
Bracket Optional Location
Chain
Bracket Factory Location
Gas range drip pans
Optional accessories for standard burner and sealed burner
gas ranges
Anti-tip brackets
Electric range
For use with free-standing electric ranges.
(Models: JBP95/90/82/80/69/68/66/64/61/60/48/35/30/26/24/21 and JBS27/26/07/05/03)
Part No. 164D3799P002
For use with Hotpoint
®
free-standing electric ranges.
(Models: RB798/787/757/753/536/526/525 and RA524/520)
Part No. WB02K10020
Gas range
For use with free-standing gas ranges.
(Models: JGB920/910, J2B900 and JGBP90/86/85/79/35/30/28/26/24 and JGBS23/22/20/17/07/05/04/03 and JGBC23/22/20/17/07/03)
Part No. 205C1714P001
For use with Hotpoint free-standing gas ranges.
(Models: RGB845/745/535/533/532/528/526/524/508 and RGA524/520)
Part No. WB02K0020
Electric Range
Gas Range
Universal
Miscellaneous
All GE ranges are equipped with an anti-tip device. The installation of this device is an important, required step in the installation of the range.
Universal anti-tip kit
If the kit packed with the range is lost or the installation
location makes using that kit impossible, this kit can be used with any gas or electric free-standing range, or any gas or electric slide-in range.
Part No. WB2X7909
(Models: JGBC20, JGBS20, JGBS17, JGBS07, JGBS04 and JGBS03)
WB35K10001–Black WB35K10002–Chrome
(Model: JGBP24)
WB34K10010–Left Black WB34K10020–Right Black WB34K10012–Left Chrome WB34K10040–Right Chrome
(Model: JGBP28)
WB32K10009–Left Black WB32K10001–Right Black
Page 11
11
Slide-In Downdraft Range Accessories – For use with JSP69 only
JXGR63B Radiant module for slide-in downdraft range
JXGC53B Coil module for slide-in downdraft range – Black
JXGC53W Coil module for slide-in downdraft range – White
JXGL90 Griddle accessory for slide-in downdraft range
JXGG50 Grill module for slide-in downdraft range
Cooktop Accessories
JXLP56 LP conversion kit for JGP656
JXCK89 Optional accessory kit for JP385 and JP389 downdraft cooktops only, includes junction box and conduit
Ventilation Accessories
WB02X10710 Removable grease filter – 36" High-performance hoods – JV666C, JV665C
WB02X10706 Removable grease filter – 36" Performance hoods – JV566C, JV565C
WB02X10708 Removable charcoal filter – 36" Performance hoods – JV566C, JV565C
WB02X10713 Removable grease filter – 30" High-performance hoods – JV636C, JV635C
WB02X10709 Removable grease filter – 30" Performance hoods – JV536C, JV535C
WB02X10707 Removable charcoal filter – 30" Performance hoods – JV536C, JV535C
WB02X9381 Removable grease filter – 30" Standard/deluxe hoods – JV347X, JV327X, JV337X, JN327X
WB02X10700 Removable charcoal filter – 30" Standard/deluxe hoods – JV347X, JV327X, JV337X, JN327X
Miscellaneous Accessories
ZXD30B Wood panel kit allows for the installation of a custom wood panel on 30" warming drawers
ZXD27B Wood panel kit allows for the installation of a custom wood panel on 27" warming drawers
WX10X300 CERAMA BRYTE®cleaning cream for all cooking products with ceramic glass
WX10X0302 CERAMA BRYTE cooktop scraper for all cooking products with ceramic glass
WB64X5027 CERAMA BRYTE cleaning cream and scraper for all cooking products with ceramic glass
WX10X350 CERAMA BRYTE cleaning pads for all cooking products with ceramic glass
Page 12
GE has a policy of continuous improvement of its products and reserves the right to change materials and specications without notice.
© 2002 General Electric Company Pub. No. 3-X092 PC31538
GE Appliances
General Electric Company Louisville, Kentucky 40225
GEAppliances.com
Loading...