GE JVB96SA, JVB93SA, JVB67A, JVB37A Catalog

Download

Page 1

We bring good things to life.

Featuring 36" and 30" models: JVB96SA, JVB93SA, JVB67A and JVB37A

GE TELESCOPIC DOWNDRAFT SYSTEMS

Planning Guide

Page 2

36" and 30" Cooktop/Downdraft System Counter Installation JVB96SA/93SA, JVB67A/37A

Note: The counter top must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back. In addition, other clearances to the front edge must be considered.

Note: JGP932SEC, JP938SC, JP930SC, JP350SC require 23-5/8" flat surface area. Note: See specific cutout illustrations with your cooktop model to determine requirements. Note: A counter top with a raised or a rolled front edge may not allow enough flat area for installation.

Planning Installation Preparing Cutout

All Models

“A” Fig. 1 “B” Fig. 1 “B” & Vent Fig. 1 “C” Figs. 2 & 3 “D” Figs. 2 & 3 “E” Fig. 2

Overall Min. required

Surface Depth setback from Downdraft

Cooktop front edge Countertop Cutout Width

Cooktop Cooktop Depth + Vent to front edge inside cabinet Req’d from

36" Models Overall Width Overall Depth Cover Depth of cutout clearance Centerline

Electric

JP968S/JP960S 36-1/8" 21" 23 -1/8" 2-1/2" 22-11/16" 33-1/16"

JP968/JP960 36" 20-3/8" 22-1/2" 2-1/2" 22-11/16" 33-1/16" JP626 35-1/2" 21" 23-1/8" 2-1/2" 22-11/16" 33-1/16"

Gas

JGP962S 36" 21" 23-1/8" 2-1/2" 22-11/16" 33-1/16" JGP963S/JGP963/JGP628 36" 21" 23-1/8" 2-1/2" 22-11/16" 33-1/16" JGP962 36" 20-7/16" 22-9/16" 2-1/2" 22-11/16" 33-1/16" JGP960S 36" 21-1/4" 23-3/8" 2-1/2" 22-11/16" 33-1/16" JGP636 36" 21" 23-1/8" 2-1/2" 22-11/16" 33-1/16"

30" Models

Electric

JP938S/JP930S/JP350S 29-7/8" 21-1/2" 23-5/8" 2-1/2" 22-7/16" 27-1/16" JP938/JP930/JP350/JP340 29-3/4" 20-7/8" 23" 2-1/2" 22-7/16" 27-1/16" JP326 30-1/4" 21-1/4" 23-3/8" 2-1/2" 22-7/16" 27-1/16"

Gas

JGP933S/JGP933/JGP328 30" 21" 23-1/8" 2-1/2" 22-7/16" 27-1/16" JGP932S 29-7/8" 21-1/2" 23-5/8" 2-1/2" 22-7/16" 27-1/16" JGP932 29-3/4" 21" 23-1/8" 2-1/2" 22-7/16" 27-1/16" JGP930S 30" 21-1/4" 23-3/8" 2-1/2" 22-7/16" 27-1/16" JGP336 30" 21" 23-1/8" 2-1/2" 22-7/16" 27-1/16"

Models JVB96SA/93SA Models JVB67A/37A

Flat Surface Area

2-1/4"

12-3/8"

Max.

6-3/8"

2-1/8"*

14-3/4"

27"

8-1/2" Lift

36"/30"

Vent

1-7/8"

2-1/8"*

Vent

36"/30"

24"

Required to maintain U.L. or AGA approvals.

*Includes 1/8" required gap between cooktop and vent trim.

Page 3

Fig. 1

Overall Cooktop Dimensions

JVB96SA/93SA only JVB67A/37A only

“F” Fig. 2 “G” Fig. 2 “H” Fig. 2 “L” Fig. 3 “M” Fig. 3

Add’l Depth Cooktop Cooktop Combined Combined

Req’d for Cutout Cutout Cutout Cutout

Downdraft Width Depth Width Depth

2-5/8" 33-7/8" 19-1/8" 33-7/8" 21-7/8" 2-1/2" 33-7/8" 19-1/8" 33-7/8" 21-3/4" 2-7/8" 33-7/8" 19-1/8" 33-7/8" 21-7/8"

2-3/4" 33-7/8" 19-1/8" 33-7/8" 21-7/8" 2-7/8" 33-7/8" 19-1/8" 33-7/8" 21-7/8" 2-5/8" 33-7/8" 19-1/8" 33-7/8" 21-3/4" 2-7/8" 33-7/8" 19-1/8" 33-7/8" 21-7/8" 2-7/8" 33-7/8" 19-1/8" 33-7/8" 21-7/8"

2-5/8" 28-1/2" 19-5/8" 28-1/2" 22-3/8" 2-1/2" 28-1/2" 19-5/8" 28-1/2" 22-1/4" 2-3/4" 28-1/2" 19-5/8" 28-1/2" 22-3/8"

2-5/8" 28-1/2" 19-5/8" 28-1/2" 22-3/8" 2-3/4" 28-1/2" 19-5/8" 28-1/2" 22-3/8" 2-5/8" 28-1/2" 19-5/8" 28-1/2" 22-1/4" 2-3/4" 28-1/2" 19-5/8" 28-1/2" 22-1/4" 2-5/8" 28-1/2" 19-5/8" 28-1/2" 22-1/4"

It is recommended that gas and/or electrical service for cooktop and downdraft should not be placed on the back wall because it may interfere with the downdraft plenum.

24" Power Cord provided (on right-hand side).

Fig. 4

Venting Island to Outside Wall

*These vents are recommended for island installation. Against the wall

installations are limited due to dimension requirements. Refer to installation instructions, packed with product, for further details.

Fig. 3

Cutout for model JVB67A/37A only

Fig. 2

Cutout for models JVB96SA/93SA only

= 27-1/2"

= 34" for 36" models

33-7/8" for 30" models

Dim. D to

Cutout

2-1/4

6-3/8

24-3/4

3/4" Thick Support Rail

Cooktop

Downdraft V ent

12-3/8

6" Dia. or 3-1/4" x 10"

Rectangular Duct required.

No Gas or Electric Service Inside Shaded Area

Island or Peninsula*

Island or

Peninsula*

= 32-1/4"

= 29-1/2"

No Gas or Electric Service Inside Shaded Area

= 29-1/2"

= 32-1/4"

Note: Minimum flat surface required is “B” + vent cover depth.

*These vents are recommended for island installation. Against the wall

installations are limited due to dimension requirements. Refer to installation instructions, packed with product, for further details.

No Gas or Electric Service Inside Shaded Area

Page 4

Listed by Underwriters Laboratories

Before purchasing any appliance on which the Federal Trade Commission requires an energy label, read important energy cost and efficiency information available from your retailer.

GE has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.

For answers to your GE Appliance Questions call the GE Answer Center

service, 800.626.2000

For GE Appliance service nationwide, call 1-800-GE-CARES

Quality Features

JVB67AWW JVB37AWW

JVB67ACC

JVB37ACC

Features JVB96SASS JVB93SASS JVB67ABB JVB37ABB

Width (in inches) 36 30 36 30

White on white White on white

Bisque on bisque

Color appearance Stainless Stainless Black on black Black on black Variable-speed fan control •••• Removable grease filters •••• Downdraft exhaust (CFM) 500 500 500 500 Extended height over cooktop 7" 7" 8-1/2" 8-1/2" 3-1/4" x 10" rectangular duct •••• Current rating Amps @ 120V 4.0 4.0 4.0 4.0 Approximate shipping weight (lbs.) 62 60 76 72

6" Round Straight

3-1/4" x 10" Straight

Elbow

3-1/4" x 10" 90

Elbow

3-1/4" x 10" 45

Elbow

3-1/4" x 10" 90

Flat Elbow

6" Round to 3-1/4" x 10" Transition

3-1/4" x 10" to 6" Round Transition

6" Round to 3-1/4" x 10" Transition 90

Elbow

3-1/4" x 10" to 6" Round Transition 90

Elbow

6" Round Wall Cap with Damper

3-1/4" x 10" Wall Cap with Damper

6" Round Roof Cap

6" Round Roof Vent

Duct Pieces Equivalent Length*Equivalent Length* Duct Pieces

1 ft. (per foot length)

15 ft.

9 ft.

16 ft.

5 ft.

24 ft.

7 ft.

5 ft.

20 ft.

12 ft.

21 ft.

27 ft.

20 ft.

24 ft.

1 ft. (per foot length)

Equivalent Length*Duct Pieces

Ducting Information

The downdraft cooktop ventilation is ideal for island or peninsula installations. The downdraft vent retracts when not in use.

• Vents smoke and vapors

• Quiet, powerful 500-CFM performance

Note: Approved for use with all GE electric and sealed burner gas cooktops,

not approved

for standard burner gas cooktops.

Warranty Information

Full One-Year Warranty (parts and labor at no additional charge). See written warranty for details.

Installation Information:

Before installing, consult installation instructions packed with product for current dimensional data.

SHOULD NOT EXCEED 150 EQUIVALENT FT.

*Equivalent lengths of duct pieces are based on actual tests conducted by GE Evaluation Engineering and reflect requirements for good venting

performance with any downdraft cooktop, with a downdraft rated at 500-CFM.

GE Appliances

General Electric Company Louisville, Kentucky 40225

GEAppliances.com