Page 1
JV347X—GE Deluxe Range Hood
5-1/2
29-7/8
17-1/2
12
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
1-3/8" Typ.
8-5/16" Typ.
Center line
of hood
1-1/4
1-1/4
Optional top power
supply connection
1-1/8" Typ.
7-3/4
10
3-1/4
1/2
Rear power
supply connection
1-3/8" Typ.
8-5/16" Typ.
Center line
of hood
1-1/4
1-1/4
Optional power
supply connection
1-1/8" Typ.
7-3/4
5-3/4
Note: Exhau
to 7" diamet
Dimensions (in inches)
Refer to this drawing for rectangular exhaust
option. Exhaust outlet connects to
3-1/4" x 10" rectangular duct.Vent top or
rear.Includes rectangular damper.
KW Rating
120V 2.5
Refer to this drawing for round
exhaust option.Exhaust outlet
connects to 7" diameter duct.
Vent top only. Round damper
accessory JXDA22, available at
additional cost.
GE Appliances
Specification Revised 7/01
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,® GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
Maximum Duct Length: For satisfactory air movement (CFM) the
total duct length should not exceed 65 equivalent feet of 3-1/4” x 10”
rectangular duct. Equivalent feet are defined as total feet straight
duct plus equivalent feet of elbows, transitions, wall caps, etc.
25
Equivalent length in feet
Air volume in CFM
50 75 100 1250
50
0
100
150
200
6" Dia.
3-1/4" x 10"
Page 2
JV347X—GE Deluxe Range Hood
Features and Benefits
• Available In 30" Width
• Vertical Exhaust 180 CFM, Rear Exhaust 160 CFM
• Rotary Control
• Three-Speed Fan
• Non-Vented Exhaust Option
• Convertible Exhaust (Shipped In a Non-Vented Configuration, Convertible To Round or
Rectangular Exhaust)
• Rectangular Damper Included
• Furnished With Disposable One-Piece Smoke/Grease Filter
• Cooktop Light With Night Light Setting*
• Light Cover
• Model JV347XWW–White on white
• Model JV347XBB–Black on black
• Model JV347XAA–Almond on almond
• Model JV347XCC–Bisque
* Light Bulbs Not Included
GE Appliances
Specification Revised 7/01
Loading...