GE JTP20, JTP20SFSS, JTP20BF, JTP20CF, JTP20WF Dimension Manual

...
GE Appliances
JTP20BF/CF/WF – GE 30" Built-In Single Oven
Dimensions (in inches) Single Oven Wall-Mount or Cabinet Installation (in inches)
KW Rating
240V 3.6
208V 2.7
Breaker Size
Note: These ovens are not approved for stackable or side-by-side installations.
Most 30" Wall Cabinets can be used with this unit.
Cutout width 28-1/2'' MIN. 28-5/8'' MAX.
29-3/4
28-1/4
30
Recommended
cutout location
32-1/2"
from floor
21
Junction box location
Allow minimum of 21'' for clearance to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
Conduit
(48-1/2"
long)
5
27-1/4'' MIN. 27-5/16'' MAX. Cutout height
A
B
23-1/2'' MIN. Cutout depth
22'' MIN.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
C
L
2 x 4 or equivalent runners
Suitable
bracing
to support
runners
18"
over centerline
of cabinet
(Must support 275 lbs.)
R
Listed by Underwriters Laboratories
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Specification Revised 2/06
320217
GE Appliances
JTP20BF/CF/WF – GE 30" Built-In Single Oven
Optional Undercounter Installation with 36" Gas Cooktop (in inches)
Optional Undercounter Installation With 30" CleanDesign or Sealed Burner Gas Cooktop (in inches)
R
Listed by Underwriters Laboratories
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.
Power cord for cooktop
Junction box for oven
Junction box in adjacent cabinet for cooktop hook-up
2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet
Right cabinet side
3/4" Support
Shut-off
valve
Pressure regulator
1/2" Black
iron pipe
Union
Conduit
(48-1/2" long)
30" built-in
oven
3-1/2" MIN. Free space
4" To 4-1/2"
3-1/4
22
Side View
This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
5-9/16"
Reference dim. for
MAX. support height
with typical 36" countertop
height
36" Typical Countertop height
Power cord
Reference
5-9/16
30-7/16
Free space
1-1/2" MIN.
1-1/2" Typical countertop
Side View
22
27-5/16" MAX.
Cutout height
27-1/4" MIN.
Junction box(s) for
oven & radiant
cooktop 22" from 
floor
Add suitable filler to match adjacent
cabinets when needed
to maintain toe kick
alignment
30" Oven W/ Rad. Cktp.
Undercounter Installation (in inches)
5
24
25
Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.
Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right.
120 Volt Outlet
Gas connection
Junction box location 240/208V
36'' MIN.
4'' To 4-1/2 '' Toe kick allowable
Match toe kick height front and two sides
22'' MIN. above support platform
Top and/or side fillers may be necessary if unit is positioned between existing cabinets
28-1/2'' MIN. 28-5/8'' MAX.
27-1/4'' MIN. 27-5/16'' MAX. Cutout height
3/4'' Support platform required
23-1/2" MIN. Cutout depth
Allow 11/16'' overlap over side edges of cutout
1-1/2" Countertop
Note: 36" ribbon cooktops (excluding JP968) are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops (excluding JP938) are approved for use over GE 30" and GE 27" single wall ovens. Model JP938 can be installed over 27" wall ovens except stainless model JK915 and JK912SF. Refer to cooktop and wall oven installation information packed with products for current dimensional data.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Specification Revised 2/06
320217
Loading...
+ 1 hidden pages