GE JTP20BF, JTP20CF, JTP20WF Specification

GE Appliances

JTP20BF/CF/WF – GE 30" Built-In Single Oven

 

 

 

Dimensions (in inches)

 

 

 

 

 

 

Single Oven Wall-Mount or Cabinet Installation (in inches)

 

 

 

 

Cutout width

 

 

 

 

 

 

28-1/2'' MIN.

5

 

 

C

 

 

28-5/8'' MAX.

 

 

 

 

 

 

 

 

L

2 x 4 or

 

 

 

 

 

 

equivalent

 

 

23-1/2'' MIN.

Junction

 

 

runners

29-3/4

 

Cutout depth

 

 

 

 

 

box

 

 

 

 

A

 

location

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

Conduit

27-1/4'' MIN.

22'' MIN.

Suitable

 

 

28-1/4

 

 

 

(48-1/2"

27-5/16'' MAX.

 

bracing

18"

 

 

long)

Cutout height

 

to support

 

 

 

 

 

runners

over centerline

 

 

 

 

 

 

of cabinet

 

(Must support 275 lbs.)

 

Recommended

 

 

cutout location

Most 30" Wall Cabinets can be used with this unit.

 

32-1/2"

21

 

from floor

 

Note: These ovens are notapproved for stackable or side-by-side installations.

Allow minimum of 21'' for clearance

30

to adjacent corners, drawers, walls, or etc.

 

A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

KW Rating

240V 3.6

208V 2.7

Breaker Size

240V 20 Amps

208V 20 Amps

For answers to your Monogram,® GE Profileor

 

 

GE appliance questions, visit our website at

 

Listed by

GEAppliances.com or call

R

Underwriters

GE Answer Center® service, 800.626.2000.

Laboratories

 

 

Specification Revised 2/06

320217

GE JTP20BF, JTP20CF, JTP20WF Specification

GE Appliances

JTP20BF/CF/WF – GE 30" Built-In Single Oven

Optional Undercounter Installation with 36" Gas Cooktop (in inches)

3-1/4

 

 

 

 

 

 

 

 

2 (two) 90°elbows &

 

 

3-1/2" MIN.

 

sufficient pipe to

 

 

 

connect in adjacent

 

 

Free space

Conduit

cabinet

 

 

 

 

Junction box

 

 

 

 

(48-1/2" long)

 

 

 

 

 

for oven

 

 

 

 

1/2" Black

 

Junction box in

 

 

 

iron pipe

 

adjacent cabinet

 

 

 

Pressure

 

for cooktop

 

 

 

 

22

hook-up

 

 

 

 

regulator

 

 

 

 

 

30" built-in

Union

 

 

 

 

 

 

oven

Shut-off

 

Power cord

 

 

 

 

 

for cooktop

 

 

 

 

valve

 

 

 

 

 

 

 

3/4" Support

 

 

 

 

 

 

4" To 4-1/2"

 

 

 

 

 

 

 

 

Right cabinet side

 

 

 

 

 

 

Side View

 

 

 

 

 

 

Undercounter Installation (in inches)

 

 

 

 

 

 

Gas or electric cooktops may be installed over

 

 

 

this oven. See cooktop installation instructions

 

 

 

for cutout size. See label on top of oven for

 

 

 

 

approved cooktop models.

 

 

 

Gas (including the pressure regulator) and

25

 

Junction box

Gas

 

 

 

electrical connections for gas cooktop must

 

 

location

 

connection

be located in an adjacent accessible location.

 

 

240/208V

 

5

 

For a 30" gas cooktop, the connections are

 

 

 

 

 

 

more conveniently made to the right.

 

23-1/2" MIN.

 

 

 

 

120 Volt

1-1/2"

 

Cutout depth

 

 

 

 

Outlet

 

 

 

 

 

 

 

Countertop

Top and/or side

 

 

 

 

 

 

 

fillers may be

 

 

 

 

 

 

 

necessary if unit

28-1/2'' MIN.

 

 

 

 

 

 

is positioned

 

 

 

 

 

 

between

28-5/8'' MAX.

Allow 11/16''

22'' MIN. above

 

existing cabinets

27-1/4'' MIN.

36'' MIN.

 

27-5/16'' MAX.

overlap over side

support platform

 

Cutout height

edges of cutout

 

 

 

3/4'' Support

 

 

 

 

24

 

 

 

 

 

 

 

platform required

 

 

 

 

 

 

Match toe kick height front and two sides

4'' To 4-1/2 '' Toe kick allowable

Specification Revised 2/06

Optional Undercounter Installation With

30" CleanDesign or Sealed Burner Gas Cooktop (in inches)

1-1/2" Typical countertop

Free space

 

Power cord

1-1/2" MIN.

 

 

Junction box(s) for

 

 

 

 

 

 

oven & radiant

 

 

 

cooktop 22" from

 

 

 

floor

30-7/16

27-1/4" MIN.

 

 

27-5/16" MAX.

36" Typical

 

Cutout height

Countertop height

 

 

 

22

5-9/16"

 

 

Reference

Reference dim. for

 

 

5-9/16

MAX. support height

 

with typical 36" countertop

 

 

height

Add suitable filler

Side View

 

 

to match adjacent

 

 

cabinets when needed

 

 

to maintain toe kick

 

 

 

alignment

 

 

This installation is to achieve minimum gap between bottom of countertop and control panel.

Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Note: 36" ribbon cooktops (excluding JP968) are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops (excluding JP938) are approved for use over GE 30" and

GE 27" single wall ovens. Model JP938 can be installed over 27" wall ovens except stainless model JK915 and JK912SF. Refer to cooktop and wall oven installation information packed with products for current dimensional data.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profileor GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

320217

Loading...
+ 1 hidden pages