JTD5000DN/BN/EN/FN/SN
GE® 30" Smart Built-In Self-Clean Convection
Double Wall Oven with Never Scrub Racks
DIMENSIONS AND INSTALLATION INFORMATION
NOTE: Wall coverings, countertops and cabinets |
|
|
surrounding the wall oven must be able to withstand a |
|
|
temperature of up to 200°F (94°C). |
F |
|
|
||
NOTE: If the cabinet in which the wall oven is installed |
|
|
does not have a solid bottom, two braces or runners |
Conduit |
|
must be installed to support the weight of the oven. The |
||
48" |
||
runners and braces must support up to 400 lbs (181 kg). |
|
|
NOTE: Door handle protrudes 3" from door face. |
|
|
Cabinets and drawers on adjacent 45° and 90° walls |
E |
|
should be placed to avoid interference with the handle. |
|
|
ATTENTION INSTALLER: Electric wall ovens |
22" |
|
are NOT approved for installation with a plug and |
||
receptacle. They must be hard wired into an approved |
23" minimum |
|
junction box. |
||
door opening |
||
IMPORTANT: Before installing, consult installation |
allowance |
|
D |
||
instructions packed with product for current |
|
|
dimensional data. |
|
KW RATING |
|
|
|
240V |
8.4 |
C |
2 x 4 or |
|
|
equivalent runners |
|
208V |
6.3 |
L |
level with bottom of cutout |
BREAKER SIZE |
|
and flush with sides of cutout |
|
|
or solid bottom floor. |
||
240V |
40 Amps |
|
|
208V |
40 Amps |
|
|
Suitable bracing
torunnerssupport (must support 400 lbs.)
For answers to your GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
9-1/2" MAX. |
Cutout width |
|
28-1/2" MIN. |
Cutout depth |
28-5/8" MAX. |
23-1/2" MIN |
|
Junction box |
|
location |
A |
|
|
B |
|
47" to |
|
bottom of |
|
junction box |
|
|
C |
|
30'' |
Cutout height
50-1/4" MIN. without pedestal
51-13/16" MIN.
51-15/16" MAX. with pedestal
Recommended minimum cutout location from the floor
12"
|
|
|
|
|
|
|
|
|
|
|
JTD5000 |
|
|
|
|
|
|
|
|
||||||
Cabinet |
|
30" |
|
|||||||||
A - Overlap of oven at top of cutout |
|
1" |
|
|||||||||
B - Overlap of oven other side of edge of cutout |
3/4" |
|
||||||||||
C - Overlap of oven at bottom of cutout |
|
1-1/4" |
|
|||||||||
Oven |
|
|
|
|||||||||
D - Install depth |
|
23-1/2" |
|
|||||||||
E - Overall height with trim |
|
53" |
|
|||||||||
F - Overall width |
|
29-3/4" |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ADA |
|
Listed by |
|
|
|
|
|
|
|
|
|
|
|
Underwriters |
|
|
|
|
|
|
|
|
|
|
|
|
Laboratories |
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
COMPLIANT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specification Revised 6/20
JTD5000DN/BN/EN/FN/SN
GE® 30" Smart Built-In Self-Clean Convection Double Wall Oven with Never Scrub Racks
DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 30” Double electric wall ovens are approved for installation above 27” and 30” warming drawers.
ATTENTION INSTALLER: Electric wall ovens are NOT approved for installation with a plug and receptacle. They must be hard wired into an approved junction box.
IMPORTANT: Before installing, consult installation instructions packed with ALL products for current dimensional and combination data.
WHEN TO USE THE PEDESTAL RAILS: When replacing an older GE Appliances 30" double wall oven with a new GE Appliances model. Cutout Height = 51-13/16" to 51-15/16". This is our traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from another manufacturer (ie; Whirlpool) with a new GE Appliances model. Cutout height = 50-1/4". You will need to verify that the existing cutout matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven is being installed into new construction (ie; not a replacement), then the recommended installation is to use the pedestal rails.
Attachment
screws
Flanges toward center of cutout
Top cutout toward front
For answers to your GE Profile™ Series or GE Appliances product questions, visit our |
|
website at geappliances.com or call GE Answer Center® Service, 800.626.2000. |
Specification Revised 6/20 |