GE JT950SYSS Specification
JT950SYSS—GE Profile Performance™ 30" Built-In Double Oven
Dimensions (in inches)
21" minimum Door Opening Allowance
Cutout width 
28-1/2'' MIN. 28-5/8'' MAX.
E
A
B
Conduit (48" long)
D
21
B
C
5
CUTOUT DEPTH 23-1/2'' MIN.
Cut Opening
in Solid
Bottom
47
6
(Must Support 275 lbs.)
Cutout height 51-13/16" MIN. 51-15/16" MAX.
A
Junction box location
Recommended cutout location 12" from the floor.
Cabinet width 30"
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE
Note: If a solid bottom is used instead of the runners, a 6" x 10" rectangle must be cut out of the bottom for optimum performance
and proper air circulation.
10
6
KW Rating
240V |
6.36 |
208V |
4.78 |
|
|
Cabinet |
30" |
A – Overlap of Oven Over Side Edges of Cutout |
11/16" – 3/4" |
B – Overlap of Oven at Bottom of Cutout |
1" |
Oven |
|
C – Overall Depth |
23-1/2" |
D – Overall Height |
52-15/16" |
E – Overall Width |
30" |
Installation Information: Before installing, consult installation instructions [Pub. No. 31-10198] packed with product for current dimensional data.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least 194°
For answers to your Monogram,®GE Profile Performance Series,™ GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000.
Created 1/98
R
Listed by Underwriters Laboratories
JT950SYSS—GE Profile Performance™ 30" Built-In Double Oven
Features and Benefits
• Convection Upper Oven:
–Large 3.8 Cu.Ft. Self-Cleaning Oven with Delay Clean Option
–3 Oven Racks / 7 Embossed Rack Positions
–Convection Bake
–Convection Roast
–Roasting Rack
•Thermal Lower Oven:
–Large 4.2 Cu.Ft. Self-Cleaning Oven with Delay Clean Option –2 Oven Racks / 6 Embossed Rack Positions
• SmartSet Electronic Oven Controls
• Automatic Meat Thermometer
•Variable Broil / Six-Pass Broil Element
•Broiler Pan with Grid
•Up-Front Oven Lights
•Big-View Windows
•Integrated Designer-Style Handles
•30" Oven Cabinet Width Required
• Model JT950SYSS–Stainless Steel
Created 1/98
Loading...