GE JT915BF, JT915CF, JT915SF, JT915WF User Manual

JT915BF/CF/SF/WF – GE Profile™30" Built-In Single Oven

Dimensions (in inches) Single Oven Wall-Mount or Cabinet Installation (in inches)

KW Rating

240V 3.6 208V 2.7

Breaker Size

240V 20 Amps 208V 20 Amps

Note: These ovens are not approved for stackable or side-by-side installations.

Most 30" Wall Cabinets can be used with this unit.

Cutout width 28-1/2'' MIN. 28-5/8'' MAX.

29-3/4

28-1/4

Recommended

cutout location

32-1/2"

from floor

Junction box location

Allow minimum of 21'' for clearance to adjacent corners, drawers, walls, or etc.

A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

Conduit

(48" long)

27-1/4'' MIN. 27-5/16'' MAX. Cutout height

23-1/2'' MIN. Cutout depth

22'' MIN.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

2 x 4 or equivalent runners

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

(Must support 275 lbs.)

Specification Created 7/02

Listed by Underwriters Laboratories

For answers to your Monogram,®GE Profile™or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center®service, 800.626.2000.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

JT915BF/CF/SF/WF – GE Profile™30" Built-In Single Oven

Optional Undercounter Installation with 36" Gas Cooktop (in inches)

Optional Undercounter Installation With 30" CleanDesign or Sealed Burner Gas Cooktop (in inches)

Specification Created 7/02

Listed by Underwriters Laboratories

For answers to your Monogram,®GE Profile™or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center®service, 800.626.2000.

Power cord for counter unit

Junction box for oven

Junction box in adjacent cabinet for counter unit hook-up

2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet

Right cabinet side

3/4" Support

Shut-off

valve

Pressure regulator

1/2" Black

iron pipe

Union

Conduit

(48" long)

30" built-in

oven

3-1/2" MIN. Free space

4" To 4-1/2"

3-1/4

19-1/16" Cutout depth

Side View

This installation is to achieve minimum gap between bottom of countertop and control panel.

Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

5-9/16"

Reference dim. for

MAX. support height

with typical 36" countertop

height

36" Typical Countertop height

Power cord

Reference 5-9/16

30-7/16

Free space

1-1/2" MIN.

1-1/2" Typical countertop

Side View

27-5/16" MAX.

Cutout height

27-1/4" MIN.

Junction box(s) for

oven & radiant

cooktop 22" from

floor

Add suitable filler

to match adjacent

cabinets when needed

to maintain toe kick

alignment

Undercounter Installation (in inches)

Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location to the right. For a 36" gas cooktop, the connections may be made to the left.

120 Volt Outlet

Gas connection

Junction box location 240/208V

36'' MIN.

4'' To 4-1/2 '' Toe kick allowable

Match toe kick height front and two sides

22'' MIN. above support platform

Top and/or side fillers may be necessary if unit is positioned between existing cabinets

28-1/2'' MIN.

28-5/8'' MAX. 27-1/4'' MIN. 27-5/16'' MAX. Cutout height

3/4'' Support platform required

23-1/2" MIN. Cutout depth

Allow 11/16'' overlap over side edges of cutout

1-1/2" Countertop

Note: 36" ribbon cooktops (excluding JP968) are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops (excluding JP938) are approved for use over GE 30" and GE 27" single wall ovens. Model JP938 can be installed over 27" wall ovens except stainless model JK915 and JK912SF. Refer to cooktop and wall oven installation information packed with products for current dimensional data.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

+ 1 hidden pages